From: Christoph Hellwig <hch@lst.de>
Date: Tue, 10 Jan 2017 08:41:43 +0000 (+0100)
Subject: libata: avoid global response buffer in atapi_qc_complete
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=aa18da8b7ec57f6ff255634746aed6266a01b315;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

libata: avoid global response buffer in atapi_qc_complete

We only need to look at 4 bytes of the inquiry response for ATAPI
devices.  Instead of using the global ata_scsi_rbuf just use a
a stack buffer.  Also factor the fixup into it's own little helper
function to make it more readable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
---

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1f863e757ee4..031a77aae19d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2873,6 +2873,26 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
 	DPRINTK("EXIT\n");
 }
 
+/*
+ * ATAPI devices typically report zero for their SCSI version, and sometimes
+ * deviate from the spec WRT response data format.  If SCSI version is
+ * reported as zero like normal, then we make the following fixups:
+ *   1) Fake MMC-5 version, to indicate to the Linux scsi midlayer this is a
+ *	modern device.
+ *   2) Ensure response data format / ATAPI information are always correct.
+ */
+static void atapi_fixup_inquiry(struct scsi_cmnd *cmd)
+{
+	u8 buf[4];
+
+	sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, 4);
+	if (buf[2] == 0) {
+		buf[2] = 0x5;
+		buf[3] = 0x32;
+	}
+	sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd), buf, 4);
+}
+
 static void atapi_qc_complete(struct ata_queued_cmd *qc)
 {
 	struct scsi_cmnd *cmd = qc->scsicmd;
@@ -2927,30 +2947,8 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
 		 */
 		ata_gen_passthru_sense(qc);
 	} else {
-		u8 *scsicmd = cmd->cmnd;
-
-		if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) {
-			unsigned long flags;
-			u8 *buf;
-
-			buf = ata_scsi_rbuf_get(cmd, true, &flags);
-
-	/* ATAPI devices typically report zero for their SCSI version,
-	 * and sometimes deviate from the spec WRT response data
-	 * format.  If SCSI version is reported as zero like normal,
-	 * then we make the following fixups:  1) Fake MMC-5 version,
-	 * to indicate to the Linux scsi midlayer this is a modern
-	 * device.  2) Ensure response data format / ATAPI information
-	 * are always correct.
-	 */
-			if (buf[2] == 0) {
-				buf[2] = 0x5;
-				buf[3] = 0x32;
-			}
-
-			ata_scsi_rbuf_put(cmd, true, &flags);
-		}
-
+		if (cmd->cmnd[0] == INQUIRY && (cmd->cmnd[1] & 0x03) == 0)
+			atapi_fixup_inquiry(cmd);
 		cmd->result = SAM_STAT_GOOD;
 	}