From: Mark Asselstine <mark.asselstine@windriver.com>
Date: Thu, 15 May 2008 06:25:33 +0000 (-0700)
Subject: hysdn: Remove cli()/sti() calls.
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a9dd7fe28742c6b22eb8f214a04c4d2bcb2c0899;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git

hysdn: Remove cli()/sti() calls.

The use of cli()/sti() within the do/while was a way to ensure
interrupts were only disabled for short periods of time while the bulk
of the time interrupts were free to occur.  The use of the spin lock
has eliminated the need to play with interrupts in this way while
still allowing for IO to be protected.

The remaining 3 sti() calls seem unneeded now that at no other point
in the driver is there a call to cli().

Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c
index 6cdbad3a9926..3eb096f0ae1b 100644
--- a/drivers/isdn/hysdn/boardergo.c
+++ b/drivers/isdn/hysdn/boardergo.c
@@ -64,10 +64,11 @@ ergo_interrupt(int intno, void *dev_id)
 }				/* ergo_interrupt */
 
 /******************************************************************************/
-/* ergo_irq_bh is the function called by the immediate kernel task list after */
-/* being activated with queue_task and no interrupts active. This task is the */
-/* only one handling data transfer from or to the card after booting. The task */
-/* may be queued from everywhere (interrupts included).                       */
+/* ergo_irq_bh will be called as part of the kernel clearing its shared work  */
+/* queue sometime after a call to schedule_work has been made passing our     */
+/* work_struct. This task is the only one handling data transfer from or to   */
+/* the card after booting. The task may be queued from everywhere             */
+/* (interrupts included).                                                     */
 /******************************************************************************/
 static void
 ergo_irq_bh(struct work_struct *ugli_api)
@@ -90,7 +91,6 @@ ergo_irq_bh(struct work_struct *ugli_api)
 	card->hw_lock = 1;	/* we now lock the hardware */
 
 	do {
-		sti();		/* reenable other ints */
 		again = 0;	/* assume loop not to be repeated */
 
 		if (!dpr->ToHyFlag) {
@@ -110,7 +110,6 @@ ergo_irq_bh(struct work_struct *ugli_api)
 				again = 1;	/* restart loop */
 			}
 		}		/* a message has arrived for us */
-		cli();		/* no further ints */
 		if (again) {
 			dpr->ToHyInt = 1;
 			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
@@ -242,7 +241,6 @@ ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf,
 		byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN);	/* start E1 processor */
 		/* the interrupts are still masked */
 
-		sti();
 		msleep_interruptible(20);		/* Timeout 20ms */
 
 		if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
@@ -276,7 +274,6 @@ ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len)
 	dst = sp->Data;		/* point to data in spool structure */
 	buflen = sp->Len;	/* maximum len of spooled data */
 	wr_mirror = sp->WrPtr;	/* only once read */
-	sti();
 
 	/* try until all bytes written or error */
 	i = 0x1000;		/* timeout value */
@@ -380,7 +377,6 @@ ergo_waitpofready(struct HYSDN_CARD *card)
 #endif /* CONFIG_HYSDN_CAPI */
 			return (0);	/* success */
 		}		/* data has arrived */
-		sti();
 		msleep_interruptible(50);		/* Timeout 50ms */
 	}			/* wait until timeout */