From: Arvind Kumar Date: Thu, 8 Mar 2012 10:18:53 +0000 (+0530) Subject: [SCSI] vmw_pvscsi: Try setting host->max_id as suggested by the device. X-Git-Tag: MMI-PSA29.97-13-9~17088^2~28 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a93107355d2d4557e7e19ea1724bdb710268cd34;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git [SCSI] vmw_pvscsi: Try setting host->max_id as suggested by the device. Fetch the config page from the device to learn max target id to set host->max_id. Also, fix some indentation issues and update the 'Maintained by' field. Signed-off-by: Arvind Kumar Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 7264116185d5..4411d4224401 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * - * Maintained by: Alok N Kataria + * Maintained by: Arvind Kumar * */ @@ -1178,11 +1178,67 @@ static int __devinit pvscsi_allocate_sg(struct pvscsi_adapter *adapter) return 0; } +/* + * Query the device, fetch the config info and return the + * maximum number of targets on the adapter. In case of + * failure due to any reason return default i.e. 16. + */ +static u32 pvscsi_get_max_targets(struct pvscsi_adapter *adapter) +{ + struct PVSCSICmdDescConfigCmd cmd; + struct PVSCSIConfigPageHeader *header; + struct device *dev; + dma_addr_t configPagePA; + void *config_page; + u32 numPhys = 16; + + dev = pvscsi_dev(adapter); + config_page = pci_alloc_consistent(adapter->dev, PAGE_SIZE, + &configPagePA); + if (!config_page) { + dev_warn(dev, "vmw_pvscsi: failed to allocate memory for config page\n"); + goto exit; + } + BUG_ON(configPagePA & ~PAGE_MASK); + + /* Fetch config info from the device. */ + cmd.configPageAddress = ((u64)PVSCSI_CONFIG_CONTROLLER_ADDRESS) << 32; + cmd.configPageNum = PVSCSI_CONFIG_PAGE_CONTROLLER; + cmd.cmpAddr = configPagePA; + cmd._pad = 0; + + /* + * Mark the completion page header with error values. If the device + * completes the command successfully, it sets the status values to + * indicate success. + */ + header = config_page; + memset(header, 0, sizeof *header); + header->hostStatus = BTSTAT_INVPARAM; + header->scsiStatus = SDSTAT_CHECK; + + pvscsi_write_cmd_desc(adapter, PVSCSI_CMD_CONFIG, &cmd, sizeof cmd); + + if (header->hostStatus == BTSTAT_SUCCESS && + header->scsiStatus == SDSTAT_GOOD) { + struct PVSCSIConfigPageController *config; + + config = config_page; + numPhys = config->numPhys; + } else + dev_warn(dev, "vmw_pvscsi: PVSCSI_CMD_CONFIG failed. hostStatus = 0x%x, scsiStatus = 0x%x\n", + header->hostStatus, header->scsiStatus); + pci_free_consistent(adapter->dev, PAGE_SIZE, config_page, configPagePA); +exit: + return numPhys; +} + static int __devinit pvscsi_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct pvscsi_adapter *adapter; struct Scsi_Host *host; + struct device *dev; unsigned int i; unsigned long flags = 0; int error; @@ -1271,6 +1327,13 @@ static int __devinit pvscsi_probe(struct pci_dev *pdev, goto out_release_resources; } + /* + * Ask the device for max number of targets. + */ + host->max_id = pvscsi_get_max_targets(adapter); + dev = pvscsi_dev(adapter); + dev_info(dev, "vmw_pvscsi: host->max_id: %u\n", host->max_id); + /* * From this point on we should reset the adapter if anything goes * wrong. diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h index 62e36e75715e..3546e8662e30 100644 --- a/drivers/scsi/vmw_pvscsi.h +++ b/drivers/scsi/vmw_pvscsi.h @@ -17,7 +17,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * - * Maintained by: Alok N Kataria + * Maintained by: Arvind Kumar * */ @@ -26,7 +26,7 @@ #include -#define PVSCSI_DRIVER_VERSION_STRING "1.0.1.0-k" +#define PVSCSI_DRIVER_VERSION_STRING "1.0.2.0-k" #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 @@ -39,28 +39,45 @@ * host adapter status/error codes */ enum HostBusAdapterStatus { - BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ - BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, - BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, - BTSTAT_DATA_UNDERRUN = 0x0c, - BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ - BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ - BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ - BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence requested by target */ - BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from first CCB */ - BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ - BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message rejected by target */ - BTSTAT_BADMSG = 0x1d, /* unsupported message received by the host adapter */ - BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ - BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, sent a SCSI RST */ - BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ - BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */ - BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly (w/o tag) */ - BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ - BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ - BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ - BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ - BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ + BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ + BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, + BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, + BTSTAT_DATA_UNDERRUN = 0x0c, + BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ + BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ + BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ + BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence + * requested by target */ + BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN from + * first CCB */ + BTSTAT_INVPARAM = 0x1a, /* invalid parameter in CCB or segment + * list */ + BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ + BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message + * rejected by target */ + BTSTAT_BADMSG = 0x1d, /* unsupported message received by the + * host adapter */ + BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ + BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, + * sent a SCSI RST */ + BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ + BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI + * RST */ + BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly + * (w/o tag) */ + BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ + BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ + BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ + BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ + BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ +}; + +/* + * SCSI device status values. + */ +enum ScsiDeviceStatus { + SDSTAT_GOOD = 0x00, /* No errors. */ + SDSTAT_CHECK = 0x02, /* Check condition. */ }; /* @@ -113,6 +130,29 @@ struct PVSCSICmdDescResetDevice { u8 lun[8]; } __packed; +/* + * Command descriptor for PVSCSI_CMD_CONFIG -- + */ + +struct PVSCSICmdDescConfigCmd { + u64 cmpAddr; + u64 configPageAddress; + u32 configPageNum; + u32 _pad; +} __packed; + +enum PVSCSIConfigPageType { + PVSCSI_CONFIG_PAGE_CONTROLLER = 0x1958, + PVSCSI_CONFIG_PAGE_PHY = 0x1959, + PVSCSI_CONFIG_PAGE_DEVICE = 0x195a, +}; + +enum PVSCSIConfigPageAddressType { + PVSCSI_CONFIG_CONTROLLER_ADDRESS = 0x2120, + PVSCSI_CONFIG_BUSTARGET_ADDRESS = 0x2121, + PVSCSI_CONFIG_PHY_ADDRESS = 0x2122, +}; + /* * Command descriptor for PVSCSI_CMD_ABORT_CMD -- * @@ -332,6 +372,27 @@ struct PVSCSIRingCmpDesc { u32 _pad[2]; } __packed; +struct PVSCSIConfigPageHeader { + u32 pageNum; + u16 numDwords; + u16 hostStatus; + u16 scsiStatus; + u16 reserved[3]; +} __packed; + +struct PVSCSIConfigPageController { + struct PVSCSIConfigPageHeader header; + u64 nodeWWN; /* Device name as defined in the SAS spec. */ + u16 manufacturer[64]; + u16 serialNumber[64]; + u16 opromVersion[32]; + u16 hwVersion[32]; + u16 firmwareVersion[32]; + u32 numPhys; + u8 useConsecutivePhyWWNs; + u8 reserved[3]; +} __packed; + /* * Interrupt status / IRQ bits. */