From: Yaniv Rosner Date: Mon, 31 Jan 2011 04:22:28 +0000 (+0000) Subject: bnx2x: Enhance SFP+ module control X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a8db5b4cbde619246cd3db9a59dac5d0757aff36;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git bnx2x: Enhance SFP+ module control Add flexible support to control various SFP+ module features either throughout MDIO registers or GPIO pins according to NVRAM configuration Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h index 548f5631c0dc..34e313cf3e25 100644 --- a/drivers/net/bnx2x/bnx2x_hsi.h +++ b/drivers/net/bnx2x/bnx2x_hsi.h @@ -237,8 +237,26 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ #define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT 16 - u32 Reserved0[16]; /* 0x158 */ - + u32 Reserved0[3]; /* 0x158 */ + /* Controls the TX laser of the SFP+ module */ + u32 sfp_ctrl; /* 0x164 */ +#define PORT_HW_CFG_TX_LASER_MASK 0x000000FF +#define PORT_HW_CFG_TX_LASER_SHIFT 0 +#define PORT_HW_CFG_TX_LASER_MDIO 0x00000000 +#define PORT_HW_CFG_TX_LASER_GPIO0 0x00000001 +#define PORT_HW_CFG_TX_LASER_GPIO1 0x00000002 +#define PORT_HW_CFG_TX_LASER_GPIO2 0x00000003 +#define PORT_HW_CFG_TX_LASER_GPIO3 0x00000004 + + /* Controls the fault module LED of the SFP+ */ +#define PORT_HW_CFG_FAULT_MODULE_LED_MASK 0x0000FF00 +#define PORT_HW_CFG_FAULT_MODULE_LED_SHIFT 8 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO0 0x00000000 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO1 0x00000100 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO2 0x00000200 +#define PORT_HW_CFG_FAULT_MODULE_LED_GPIO3 0x00000300 +#define PORT_HW_CFG_FAULT_MODULE_LED_DISABLED 0x00000400 + u32 Reserved01[12]; /* 0x158 */ /* for external PHY, or forced mode or during AN */ u16 xgxs_config_rx[4]; /* 0x198 */ @@ -246,6 +264,66 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */ u32 Reserved1[56]; /* 0x1A8 */ u32 default_cfg; /* 0x288 */ +#define PORT_HW_CFG_GPIO0_CONFIG_MASK 0x00000003 +#define PORT_HW_CFG_GPIO0_CONFIG_SHIFT 0 +#define PORT_HW_CFG_GPIO0_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO0_CONFIG_LOW 0x00000001 +#define PORT_HW_CFG_GPIO0_CONFIG_HIGH 0x00000002 +#define PORT_HW_CFG_GPIO0_CONFIG_INPUT 0x00000003 + +#define PORT_HW_CFG_GPIO1_CONFIG_MASK 0x0000000C +#define PORT_HW_CFG_GPIO1_CONFIG_SHIFT 2 +#define PORT_HW_CFG_GPIO1_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO1_CONFIG_LOW 0x00000004 +#define PORT_HW_CFG_GPIO1_CONFIG_HIGH 0x00000008 +#define PORT_HW_CFG_GPIO1_CONFIG_INPUT 0x0000000c + +#define PORT_HW_CFG_GPIO2_CONFIG_MASK 0x00000030 +#define PORT_HW_CFG_GPIO2_CONFIG_SHIFT 4 +#define PORT_HW_CFG_GPIO2_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO2_CONFIG_LOW 0x00000010 +#define PORT_HW_CFG_GPIO2_CONFIG_HIGH 0x00000020 +#define PORT_HW_CFG_GPIO2_CONFIG_INPUT 0x00000030 + +#define PORT_HW_CFG_GPIO3_CONFIG_MASK 0x000000C0 +#define PORT_HW_CFG_GPIO3_CONFIG_SHIFT 6 +#define PORT_HW_CFG_GPIO3_CONFIG_NA 0x00000000 +#define PORT_HW_CFG_GPIO3_CONFIG_LOW 0x00000040 +#define PORT_HW_CFG_GPIO3_CONFIG_HIGH 0x00000080 +#define PORT_HW_CFG_GPIO3_CONFIG_INPUT 0x000000c0 + + /* + * When KR link is required to be set to force which is not + * KR-compliant, this parameter determine what is the trigger for it. + * When GPIO is selected, low input will force the speed. Currently + * default speed is 1G. In the future, it may be widen to select the + * forced speed in with another parameter. Note when force-1G is + * enabled, it override option 56: Link Speed option. + */ +#define PORT_HW_CFG_FORCE_KR_ENABLER_MASK 0x00000F00 +#define PORT_HW_CFG_FORCE_KR_ENABLER_SHIFT 8 +#define PORT_HW_CFG_FORCE_KR_ENABLER_NOT_FORCED 0x00000000 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P0 0x00000100 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P0 0x00000200 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P0 0x00000300 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P0 0x00000400 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO0_P1 0x00000500 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO1_P1 0x00000600 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO2_P1 0x00000700 +#define PORT_HW_CFG_FORCE_KR_ENABLER_GPIO3_P1 0x00000800 +#define PORT_HW_CFG_FORCE_KR_ENABLER_FORCED 0x00000900 + /* Enable to determine with which GPIO to reset the external phy */ +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_MASK 0x000F0000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_SHIFT 16 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_PHY_TYPE 0x00000000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0 0x00010000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0 0x00020000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0 0x00030000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0 0x00040000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1 0x00050000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1 0x00060000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1 0x00070000 +#define PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1 0x00080000 /* Enable BAM on KR */ #define PORT_HW_CFG_ENABLE_BAM_ON_KR_MASK 0x00100000 #define PORT_HW_CFG_ENABLE_BAM_ON_KR_SHIFT 20 diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 187387e86d25..a089b62d3df6 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -4464,30 +4464,74 @@ static u8 bnx2x_8705_read_status(struct bnx2x_phy *phy, /******************************************************************/ /* SFP+ module Section */ /******************************************************************/ -static void bnx2x_sfp_set_transmitter(struct bnx2x *bp, +static u8 bnx2x_get_gpio_port(struct link_params *params) +{ + u8 gpio_port; + u32 swap_val, swap_override; + struct bnx2x *bp = params->bp; + if (CHIP_IS_E2(bp)) + gpio_port = BP_PATH(bp); + else + gpio_port = params->port; + swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); + swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + return gpio_port ^ (swap_val && swap_override); +} +static void bnx2x_sfp_set_transmitter(struct link_params *params, struct bnx2x_phy *phy, - u8 port, u8 tx_en) { u16 val; + u8 port = params->port; + struct bnx2x *bp = params->bp; + u32 tx_en_mode; - DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x\n", - tx_en, port); /* Disable/Enable transmitter ( TX laser of the SFP+ module.)*/ - bnx2x_cl45_read(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - &val); + tx_en_mode = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[port].sfp_ctrl)) & + PORT_HW_CFG_TX_LASER_MASK; + DP(NETIF_MSG_LINK, "Setting transmitter tx_en=%x for port %x " + "mode = %x\n", tx_en, port, tx_en_mode); + switch (tx_en_mode) { + case PORT_HW_CFG_TX_LASER_MDIO: - if (tx_en) - val &= ~(1<<15); - else - val |= (1<<15); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + &val); - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_PHY_IDENTIFIER, - val); + if (tx_en) + val &= ~(1<<15); + else + val |= (1<<15); + + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_PHY_IDENTIFIER, + val); + break; + case PORT_HW_CFG_TX_LASER_GPIO0: + case PORT_HW_CFG_TX_LASER_GPIO1: + case PORT_HW_CFG_TX_LASER_GPIO2: + case PORT_HW_CFG_TX_LASER_GPIO3: + { + u16 gpio_pin; + u8 gpio_port, gpio_mode; + if (tx_en) + gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_HIGH; + else + gpio_mode = MISC_REGISTERS_GPIO_OUTPUT_LOW; + + gpio_pin = tx_en_mode - PORT_HW_CFG_TX_LASER_GPIO0; + gpio_port = bnx2x_get_gpio_port(params); + bnx2x_set_gpio(bp, gpio_pin, gpio_mode, gpio_port); + break; + } + default: + DP(NETIF_MSG_LINK, "Invalid TX_LASER_MDIO 0x%x\n", tx_en_mode); + break; + } } static u8 bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, @@ -4966,11 +5010,11 @@ static void bnx2x_8727_specific_func(struct bnx2x_phy *phy, switch (action) { case DISABLE_TX: - bnx2x_sfp_set_transmitter(bp, phy, params->port, 0); + bnx2x_sfp_set_transmitter(params, phy, 0); break; case ENABLE_TX: if (!(phy->flags & FLAGS_SFP_NOT_APPROVED)) - bnx2x_sfp_set_transmitter(bp, phy, params->port, 1); + bnx2x_sfp_set_transmitter(params, phy, 1); break; default: DP(NETIF_MSG_LINK, "Function 0x%x not supported by 8727\n", @@ -4979,6 +5023,38 @@ static void bnx2x_8727_specific_func(struct bnx2x_phy *phy, } } +static void bnx2x_set_sfp_module_fault_led(struct link_params *params, + u8 gpio_mode) +{ + struct bnx2x *bp = params->bp; + + u32 fault_led_gpio = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].sfp_ctrl)) & + PORT_HW_CFG_FAULT_MODULE_LED_MASK; + switch (fault_led_gpio) { + case PORT_HW_CFG_FAULT_MODULE_LED_DISABLED: + return; + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO0: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO1: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO2: + case PORT_HW_CFG_FAULT_MODULE_LED_GPIO3: + { + u8 gpio_port = bnx2x_get_gpio_port(params); + u16 gpio_pin = fault_led_gpio - + PORT_HW_CFG_FAULT_MODULE_LED_GPIO0; + DP(NETIF_MSG_LINK, "Set fault module-detected led " + "pin %x port %x mode %x\n", + gpio_pin, gpio_port, gpio_mode); + bnx2x_set_gpio(bp, gpio_pin, gpio_mode, gpio_port); + } + break; + default: + DP(NETIF_MSG_LINK, "Error: Invalid fault led mode 0x%x\n", + fault_led_gpio); + } +} + static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, struct link_params *params) { @@ -5001,9 +5077,9 @@ static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "Module verification failed!!\n"); rc = -EINVAL; /* Turn on fault module-detected led */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_HIGH, - params->port); + bnx2x_set_sfp_module_fault_led(params, + MISC_REGISTERS_GPIO_HIGH); + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) && ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_POWER_DOWN)) { @@ -5014,10 +5090,7 @@ static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, } } else { /* Turn off fault module-detected led */ - DP(NETIF_MSG_LINK, "Turn off fault module-detected led\n"); - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_LOW, - params->port); + bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_LOW); } /* power up the SFP module */ @@ -5039,9 +5112,9 @@ static u8 bnx2x_sfp_module_detection(struct bnx2x_phy *phy, if (rc == 0 || (val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) != PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(bp, phy, params->port, 1); + bnx2x_sfp_set_transmitter(params, phy, 1); else - bnx2x_sfp_set_transmitter(bp, phy, params->port, 0); + bnx2x_sfp_set_transmitter(params, phy, 0); return rc; } @@ -5054,9 +5127,7 @@ void bnx2x_handle_module_detect_int(struct link_params *params) u8 port = params->port; /* Set valid module led off */ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_0, - MISC_REGISTERS_GPIO_HIGH, - params->port); + bnx2x_set_sfp_module_fault_led(params, MISC_REGISTERS_GPIO_HIGH); /* Get current gpio val reflecting module plugged in / out*/ gpio_val = bnx2x_get_gpio(bp, MISC_REGISTERS_GPIO_3, port); @@ -5087,7 +5158,7 @@ void bnx2x_handle_module_detect_int(struct link_params *params) */ if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(bp, phy, params->port, 0); + bnx2x_sfp_set_transmitter(params, phy, 0); } } @@ -5146,7 +5217,8 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 cnt, val; + u32 tx_en_mode; + u16 cnt, val, tmp1; struct bnx2x *bp = params->bp; bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); @@ -5220,6 +5292,26 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, 0x0004); } bnx2x_save_bcm_spirom_ver(bp, phy, params->port); + + /* + * If TX Laser is controlled by GPIO_0, do not let PHY go into low + * power mode, if TX Laser is disabled + */ + + tx_en_mode = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].sfp_ctrl)) + & PORT_HW_CFG_TX_LASER_MASK; + + if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { + DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n"); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, &tmp1); + tmp1 |= 0x1; + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_DIGITAL_CTRL, tmp1); + } + return 0; } @@ -5308,12 +5400,6 @@ static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, u32 val; u32 swap_val, swap_override, aeu_gpio_mask, offset; DP(NETIF_MSG_LINK, "Initializing BCM8726\n"); - /* Restore normal power mode*/ - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_2, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); - - bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1, - MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); bnx2x_wait_reset_complete(bp, phy, params); @@ -5500,7 +5586,8 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, struct link_params *params, struct link_vars *vars) { - u16 tmp1, val, mod_abs; + u32 tx_en_mode; + u16 tmp1, val, mod_abs, tmp2; u16 rx_alarm_ctrl_val; u16 lasi_ctrl_val; struct bnx2x *bp = params->bp; @@ -5637,6 +5724,26 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, phy->tx_preemphasis[1]); } + /* + * If TX Laser is controlled by GPIO_0, do not let PHY go into low + * power mode, if TX Laser is disabled + */ + tx_en_mode = REG_RD(bp, params->shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[params->port].sfp_ctrl)) + & PORT_HW_CFG_TX_LASER_MASK; + + if (tx_en_mode == PORT_HW_CFG_TX_LASER_GPIO0) { + + DP(NETIF_MSG_LINK, "Enabling TXONOFF_PWRDN_DIS\n"); + bnx2x_cl45_read(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, &tmp2); + tmp2 |= 0x1000; + tmp2 &= 0xFFEF; + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_OPT_CFG_REG, tmp2); + } + return 0; } @@ -5713,7 +5820,7 @@ static void bnx2x_8727_handle_mod_abs(struct bnx2x_phy *phy, if ((val & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_MASK) == PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_DISABLE_TX_LASER) - bnx2x_sfp_set_transmitter(bp, phy, params->port, 0); + bnx2x_sfp_set_transmitter(params, phy, 0); if (bnx2x_wait_for_sfp_module_initialized(phy, params) == 0) bnx2x_sfp_module_detection(phy, params); @@ -5873,7 +5980,7 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, { struct bnx2x *bp = params->bp; /* Disable Transmitter */ - bnx2x_sfp_set_transmitter(bp, phy, params->port, 0); + bnx2x_sfp_set_transmitter(params, phy, 0); /* Clear LASI */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0); @@ -7889,12 +7996,57 @@ static u8 bnx2x_8726_common_init_phy(struct bnx2x *bp, return 0; } +static void bnx2x_get_ext_phy_reset_gpio(struct bnx2x *bp, u32 shmem_base, + u8 *io_gpio, u8 *io_port) +{ + + u32 phy_gpio_reset = REG_RD(bp, shmem_base + + offsetof(struct shmem_region, + dev_info.port_hw_config[PORT_0].default_cfg)); + switch (phy_gpio_reset) { + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P0: + *io_gpio = 0; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P0: + *io_gpio = 1; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P0: + *io_gpio = 2; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P0: + *io_gpio = 3; + *io_port = 0; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO0_P1: + *io_gpio = 0; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO1_P1: + *io_gpio = 1; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO2_P1: + *io_gpio = 2; + *io_port = 1; + break; + case PORT_HW_CFG_EXT_PHY_GPIO_RST_GPIO3_P1: + *io_gpio = 3; + *io_port = 1; + break; + default: + /* Don't override the io_gpio and io_port */ + break; + } +} static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], u32 shmem2_base_path[], u8 phy_index, u32 chip_id) { - s8 port; + s8 port, reset_gpio; u32 swap_val, swap_override; struct bnx2x_phy phy[PORT_MAX]; struct bnx2x_phy *phy_blk[PORT_MAX]; @@ -7902,13 +8054,26 @@ static u8 bnx2x_8727_common_init_phy(struct bnx2x *bp, swap_val = REG_RD(bp, NIG_REG_PORT_SWAP); swap_override = REG_RD(bp, NIG_REG_STRAP_OVERRIDE); + reset_gpio = MISC_REGISTERS_GPIO_1; port = 1; - bnx2x_ext_phy_hw_reset(bp, port ^ (swap_val && swap_override)); + /* + * Retrieve the reset gpio/port which control the reset. + * Default is GPIO1, PORT1 + */ + bnx2x_get_ext_phy_reset_gpio(bp, shmem_base_path[0], + (u8 *)&reset_gpio, (u8 *)&port); /* Calculate the port based on port swap */ port ^= (swap_val && swap_override); + /* Initiate PHY reset*/ + bnx2x_set_gpio(bp, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_LOW, + port); + msleep(1); + bnx2x_set_gpio(bp, reset_gpio, MISC_REGISTERS_GPIO_OUTPUT_HIGH, + port); + msleep(5); /* PART1 - Reset both phys */ diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index e01330bb36c7..1c89f19a4425 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -6083,6 +6083,7 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_PMA_REG_8727_PCS_OPT_CTRL 0xc808 #define MDIO_PMA_REG_8727_GPIO_CTRL 0xc80e #define MDIO_PMA_REG_8727_PCS_GP 0xc842 +#define MDIO_PMA_REG_8727_OPT_CFG_REG 0xc8e4 #define MDIO_AN_REG_8727_MISC_CTRL 0x8309