From: Thierry Reding Date: Tue, 12 Apr 2016 15:07:36 +0000 (+0200) Subject: dt-bindings: tegra: Rename some bindings for consistency X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a8ca1b28acf543143bb96f62eb1423164accaa53;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git dt-bindings: tegra: Rename some bindings for consistency Device tree binding for NVIDIA Tegra have traditionally carried the "nvidia," vendor prefix in the filename. A couple of odd ones don't, so fix them up for consistency. Also rename existing bindings to reflect the first compatible value that they document. This wasn't done consistently either. Acked-by: Stephen Warren Signed-off-by: Thierry Reding Signed-off-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt new file mode 100644 index 000000000000..66c83c3e8915 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/nvidia,tegra124-ahci.txt @@ -0,0 +1,32 @@ +Tegra124 SoC SATA AHCI controller + +Required properties : +- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, + must contain '"nvidia,-ahci", "nvidia,tegra124-ahci"', where + is tegra132. +- reg : Should contain 2 entries: + - AHCI register set (SATA BAR5) + - SATA register set +- interrupts : Defines the interrupt used by SATA +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - sata + - sata-oob + - cml1 + - pll_e +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - sata + - sata-oob + - sata-cold +- phys : Must contain an entry for each entry in phy-names. + See ../phy/phy-bindings.txt for details. +- phy-names : Must include the following entries: + - sata-phy : XUSB PADCTL SATA PHY +- hvdd-supply : Defines the SATA HVDD regulator +- vddio-supply : Defines the SATA VDDIO regulator +- avdd-supply : Defines the SATA AVDD regulator +- target-5v-supply : Defines the SATA 5V power regulator +- target-12v-supply : Defines the SATA 12V power regulator diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt deleted file mode 100644 index 66c83c3e8915..000000000000 --- a/Documentation/devicetree/bindings/ata/tegra-sata.txt +++ /dev/null @@ -1,32 +0,0 @@ -Tegra124 SoC SATA AHCI controller - -Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, - must contain '"nvidia,-ahci", "nvidia,tegra124-ahci"', where - is tegra132. -- reg : Should contain 2 entries: - - AHCI register set (SATA BAR5) - - SATA register set -- interrupts : Defines the interrupt used by SATA -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - sata - - sata-oob - - cml1 - - pll_e -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - sata - - sata-oob - - sata-cold -- phys : Must contain an entry for each entry in phy-names. - See ../phy/phy-bindings.txt for details. -- phy-names : Must include the following entries: - - sata-phy : XUSB PADCTL SATA PHY -- hvdd-supply : Defines the SATA HVDD regulator -- vddio-supply : Defines the SATA VDDIO regulator -- avdd-supply : Defines the SATA AVDD regulator -- target-5v-supply : Defines the SATA 5V power regulator -- target-12v-supply : Defines the SATA 12V power regulator diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt new file mode 100644 index 000000000000..b1669fbfb740 --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt @@ -0,0 +1,44 @@ +Tegra124 CPU frequency scaling driver bindings +---------------------------------------------- + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - cpu_g: Clock mux for the fast CPU cluster. + - cpu_lp: Clock mux for the low-power CPU cluster. + - pll_x: Fast PLL clocksource. + - pll_p: Auxiliary PLL used during fast PLL rate changes. + - dfll: Fast DFLL clocksource that also automatically scales CPU voltage. +- vdd-cpu-supply: Regulator for CPU voltage + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. + +Example: +-------- +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + clocks = <&tegra_car TEGRA124_CLK_CCLK_G>, + <&tegra_car TEGRA124_CLK_CCLK_LP>, + <&tegra_car TEGRA124_CLK_PLL_X>, + <&tegra_car TEGRA124_CLK_PLL_P>, + <&dfll>; + clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll"; + clock-latency = <300000>; + vdd-cpu-supply: <&vdd_cpu>; + }; + + <...> +}; diff --git a/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt deleted file mode 100644 index b1669fbfb740..000000000000 --- a/Documentation/devicetree/bindings/cpufreq/tegra124-cpufreq.txt +++ /dev/null @@ -1,44 +0,0 @@ -Tegra124 CPU frequency scaling driver bindings ----------------------------------------------- - -Both required and optional properties listed below must be defined -under node /cpus/cpu@0. - -Required properties: -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - cpu_g: Clock mux for the fast CPU cluster. - - cpu_lp: Clock mux for the low-power CPU cluster. - - pll_x: Fast PLL clocksource. - - pll_p: Auxiliary PLL used during fast PLL rate changes. - - dfll: Fast DFLL clocksource that also automatically scales CPU voltage. -- vdd-cpu-supply: Regulator for CPU voltage - -Optional properties: -- clock-latency: Specify the possible maximum transition latency for clock, - in unit of nanoseconds. - -Example: --------- -cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - clocks = <&tegra_car TEGRA124_CLK_CCLK_G>, - <&tegra_car TEGRA124_CLK_CCLK_LP>, - <&tegra_car TEGRA124_CLK_PLL_X>, - <&tegra_car TEGRA124_CLK_PLL_P>, - <&dfll>; - clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll"; - clock-latency = <300000>; - vdd-cpu-supply: <&vdd_cpu>; - }; - - <...> -}; diff --git a/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt new file mode 100644 index 000000000000..c6908e7c42cc --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nvidia,tegra20-apbdma.txt @@ -0,0 +1,44 @@ +* NVIDIA Tegra APB DMA controller + +Required properties: +- compatible: Should be "nvidia,-apbdma" +- reg: Should contain DMA registers location and length. This shuld include + all of the per-channel registers. +- interrupts: Should contain all of the per-channel DMA interrupts. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - dma +- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in + client nodes' dmas properties. The specifier represents the DMA request + select value for the peripheral. For more details, consult the Tegra TRM's + documentation of the APB DMA channel control register REQ_SEL field. + +Examples: + +apbdma: dma@6000a000 { + compatible = "nvidia,tegra20-apbdma"; + reg = <0x6000a000 0x1200>; + interrupts = < 0 136 0x04 + 0 137 0x04 + 0 138 0x04 + 0 139 0x04 + 0 140 0x04 + 0 141 0x04 + 0 142 0x04 + 0 143 0x04 + 0 144 0x04 + 0 145 0x04 + 0 146 0x04 + 0 147 0x04 + 0 148 0x04 + 0 149 0x04 + 0 150 0x04 + 0 151 0x04 >; + clocks = <&tegra_car 34>; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt deleted file mode 100644 index c6908e7c42cc..000000000000 --- a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt +++ /dev/null @@ -1,44 +0,0 @@ -* NVIDIA Tegra APB DMA controller - -Required properties: -- compatible: Should be "nvidia,-apbdma" -- reg: Should contain DMA registers location and length. This shuld include - all of the per-channel registers. -- interrupts: Should contain all of the per-channel DMA interrupts. -- clocks: Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - dma -- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in - client nodes' dmas properties. The specifier represents the DMA request - select value for the peripheral. For more details, consult the Tegra TRM's - documentation of the APB DMA channel control register REQ_SEL field. - -Examples: - -apbdma: dma@6000a000 { - compatible = "nvidia,tegra20-apbdma"; - reg = <0x6000a000 0x1200>; - interrupts = < 0 136 0x04 - 0 137 0x04 - 0 138 0x04 - 0 139 0x04 - 0 140 0x04 - 0 141 0x04 - 0 142 0x04 - 0 143 0x04 - 0 144 0x04 - 0 145 0x04 - 0 146 0x04 - 0 147 0x04 - 0 148 0x04 - 0 149 0x04 - 0 150 0x04 - 0 151 0x04 >; - clocks = <&tegra_car 34>; - resets = <&tegra_car 34>; - reset-names = "dma"; - #dma-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt deleted file mode 100644 index 1099fe0788fa..000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra-ictlr.txt +++ /dev/null @@ -1,43 +0,0 @@ -NVIDIA Legacy Interrupt Controller - -All Tegra SoCs contain a legacy interrupt controller that routes -interrupts to the GIC, and also serves as a wakeup source. It is also -referred to as "ictlr", hence the name of the binding. - -The HW block exposes a number of interrupt controllers, each -implementing a set of 32 interrupts. - -Required properties: - -- compatible : should be: "nvidia,tegra-ictlr". The LIC on - subsequent SoCs remained backwards-compatible with Tegra30, so on - Tegra generations later than Tegra30 the compatible value should - include "nvidia,tegra30-ictlr". -- reg : Specifies base physical address and size of the registers. - Each controller must be described separately (Tegra20 has 4 of them, - whereas Tegra30 and later have 5" -- interrupt-controller : Identifies the node as an interrupt controller. -- #interrupt-cells : Specifies the number of cells needed to encode an - interrupt source. The value must be 3. -- interrupt-parent : a phandle to the GIC these interrupts are routed - to. - -Notes: - -- Because this HW ultimately routes interrupts to the GIC, the - interrupt specifier must be that of the GIC. -- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs - are explicitly forbidden. - -Example: - - ictlr: interrupt-controller@60004000 { - compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr"; - reg = <0x60004000 64>, - <0x60004100 64>, - <0x60004200 64>, - <0x60004300 64>; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&intc>; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt new file mode 100644 index 000000000000..1099fe0788fa --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/nvidia,tegra20-ictlr.txt @@ -0,0 +1,43 @@ +NVIDIA Legacy Interrupt Controller + +All Tegra SoCs contain a legacy interrupt controller that routes +interrupts to the GIC, and also serves as a wakeup source. It is also +referred to as "ictlr", hence the name of the binding. + +The HW block exposes a number of interrupt controllers, each +implementing a set of 32 interrupts. + +Required properties: + +- compatible : should be: "nvidia,tegra-ictlr". The LIC on + subsequent SoCs remained backwards-compatible with Tegra30, so on + Tegra generations later than Tegra30 the compatible value should + include "nvidia,tegra30-ictlr". +- reg : Specifies base physical address and size of the registers. + Each controller must be described separately (Tegra20 has 4 of them, + whereas Tegra30 and later have 5" +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. +- interrupt-parent : a phandle to the GIC these interrupts are routed + to. + +Notes: + +- Because this HW ultimately routes interrupts to the GIC, the + interrupt specifier must be that of the GIC. +- Only SPIs can use the ictlr as an interrupt parent. SGIs and PPIs + are explicitly forbidden. + +Example: + + ictlr: interrupt-controller@60004000 { + compatible = "nvidia,tegra20-ictlr", "nvidia,tegra-ictlr"; + reg = <0x60004000 64>, + <0x60004100 64>, + <0x60004200 64>, + <0x60004300 64>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt deleted file mode 100644 index 8dbe47013c2b..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt +++ /dev/null @@ -1,116 +0,0 @@ -NVIDIA Tegra Memory Controller device tree bindings -=================================================== - -memory-controller node ----------------------- - -Required properties: -- compatible: Should be "nvidia,tegra-mc" -- reg: Physical base address and length of the controller's registers. -- clocks: Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names: Must include the following entries: - - mc: the module's clock input -- interrupts: The interrupt outputs from the controller. -- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines - the SWGROUP of the master. - -This device implements an IOMMU that complies with the generic IOMMU binding. -See ../iommu/iommu.txt for details. - -emc-timings subnode -------------------- - -The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in -register PMC_STRAPPING_OPT_A). - -Required properties for "emc-timings" nodes : -- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for. - -timing subnode --------------- - -Each "emc-timings" node should contain a subnode for every supported EMC clock rate. - -Required properties for timing nodes : -- clock-frequency : Should contain the memory clock rate in Hz. -- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC -(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be -specified, according to the board documentation: - - MC_EMEM_ARB_CFG - MC_EMEM_ARB_OUTSTANDING_REQ - MC_EMEM_ARB_TIMING_RCD - MC_EMEM_ARB_TIMING_RP - MC_EMEM_ARB_TIMING_RC - MC_EMEM_ARB_TIMING_RAS - MC_EMEM_ARB_TIMING_FAW - MC_EMEM_ARB_TIMING_RRD - MC_EMEM_ARB_TIMING_RAP2PRE - MC_EMEM_ARB_TIMING_WAP2PRE - MC_EMEM_ARB_TIMING_R2R - MC_EMEM_ARB_TIMING_W2W - MC_EMEM_ARB_TIMING_R2W - MC_EMEM_ARB_TIMING_W2R - MC_EMEM_ARB_DA_TURNS - MC_EMEM_ARB_DA_COVERS - MC_EMEM_ARB_MISC0 - MC_EMEM_ARB_MISC1 - MC_EMEM_ARB_RING1_THROTTLE - -Example SoC include file: - -/ { - mc: memory-controller@70019000 { - compatible = "nvidia,tegra124-mc"; - reg = <0x0 0x70019000 0x0 0x1000>; - clocks = <&tegra_car TEGRA124_CLK_MC>; - clock-names = "mc"; - - interrupts = ; - - #iommu-cells = <1>; - }; - - sdhci@700b0000 { - compatible = "nvidia,tegra124-sdhci"; - ... - iommus = <&mc TEGRA_SWGROUP_SDMMC1A>; - }; -}; - -Example board file: - -/ { - memory-controller@70019000 { - emc-timings-3 { - nvidia,ram-code = <3>; - - timing-12750000 { - clock-frequency = <12750000>; - - nvidia,emem-configuration = < - 0x40040001 /* MC_EMEM_ARB_CFG */ - 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ - 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ - 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ - 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ - 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ - 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ - 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ - 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ - 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ - 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ - 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ - 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ - 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ - 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ - 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ - 0x77e30303 /* MC_EMEM_ARB_MISC0 */ - 0x70000f03 /* MC_EMEM_ARB_MISC1 */ - 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ - >; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt new file mode 100644 index 000000000000..ba0bc3f12419 --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-emc.txt @@ -0,0 +1,374 @@ +NVIDIA Tegra124 SoC EMC (external memory controller) +==================================================== + +Required properties : +- compatible : Should be "nvidia,tegra124-emc". +- reg : physical base address and length of the controller's registers. +- nvidia,memory-controller : phandle of the MC driver. + +The node should contain a "emc-timings" subnode for each supported RAM type +(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address +being its RAM_CODE. + +Required properties for "emc-timings" nodes : +- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is +used for. + +Each "emc-timings" node should contain a "timing" subnode for every supported +EMC clock rate. The "timing" subnodes should have the clock rate in Hz as +their unit address. + +Required properties for "timing" nodes : +- clock-frequency : Should contain the memory clock rate in Hz. +- The following properties contain EMC timing characterization values +(specified in the board documentation) : + - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG + - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2 + - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3 + - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL + - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0 + - nvidia,emc-cfg : EMC_CFG + - nvidia,emc-cfg-2 : EMC_CFG_2 + - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL + - nvidia,emc-mode-1 : Mode Register 1 + - nvidia,emc-mode-2 : Mode Register 2 + - nvidia,emc-mode-4 : Mode Register 4 + - nvidia,emc-mode-reset : Mode Register 0 + - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT + - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL + - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2 + - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change + - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL +- nvidia,emc-configuration : EMC timing characterization data. These are the +registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to +be specified, according to the board documentation: + + EMC_RC + EMC_RFC + EMC_RFC_SLR + EMC_RAS + EMC_RP + EMC_R2W + EMC_W2R + EMC_R2P + EMC_W2P + EMC_RD_RCD + EMC_WR_RCD + EMC_RRD + EMC_REXT + EMC_WEXT + EMC_WDV + EMC_WDV_MASK + EMC_QUSE + EMC_QUSE_WIDTH + EMC_IBDLY + EMC_EINPUT + EMC_EINPUT_DURATION + EMC_PUTERM_EXTRA + EMC_PUTERM_WIDTH + EMC_PUTERM_ADJ + EMC_CDB_CNTL_1 + EMC_CDB_CNTL_2 + EMC_CDB_CNTL_3 + EMC_QRST + EMC_QSAFE + EMC_RDV + EMC_RDV_MASK + EMC_REFRESH + EMC_BURST_REFRESH_NUM + EMC_PRE_REFRESH_REQ_CNT + EMC_PDEX2WR + EMC_PDEX2RD + EMC_PCHG2PDEN + EMC_ACT2PDEN + EMC_AR2PDEN + EMC_RW2PDEN + EMC_TXSR + EMC_TXSRDLL + EMC_TCKE + EMC_TCKESR + EMC_TPD + EMC_TFAW + EMC_TRPAB + EMC_TCLKSTABLE + EMC_TCLKSTOP + EMC_TREFBW + EMC_FBIO_CFG6 + EMC_ODT_WRITE + EMC_ODT_READ + EMC_FBIO_CFG5 + EMC_CFG_DIG_DLL + EMC_CFG_DIG_DLL_PERIOD + EMC_DLL_XFORM_DQS0 + EMC_DLL_XFORM_DQS1 + EMC_DLL_XFORM_DQS2 + EMC_DLL_XFORM_DQS3 + EMC_DLL_XFORM_DQS4 + EMC_DLL_XFORM_DQS5 + EMC_DLL_XFORM_DQS6 + EMC_DLL_XFORM_DQS7 + EMC_DLL_XFORM_DQS8 + EMC_DLL_XFORM_DQS9 + EMC_DLL_XFORM_DQS10 + EMC_DLL_XFORM_DQS11 + EMC_DLL_XFORM_DQS12 + EMC_DLL_XFORM_DQS13 + EMC_DLL_XFORM_DQS14 + EMC_DLL_XFORM_DQS15 + EMC_DLL_XFORM_QUSE0 + EMC_DLL_XFORM_QUSE1 + EMC_DLL_XFORM_QUSE2 + EMC_DLL_XFORM_QUSE3 + EMC_DLL_XFORM_QUSE4 + EMC_DLL_XFORM_QUSE5 + EMC_DLL_XFORM_QUSE6 + EMC_DLL_XFORM_QUSE7 + EMC_DLL_XFORM_ADDR0 + EMC_DLL_XFORM_ADDR1 + EMC_DLL_XFORM_ADDR2 + EMC_DLL_XFORM_ADDR3 + EMC_DLL_XFORM_ADDR4 + EMC_DLL_XFORM_ADDR5 + EMC_DLL_XFORM_QUSE8 + EMC_DLL_XFORM_QUSE9 + EMC_DLL_XFORM_QUSE10 + EMC_DLL_XFORM_QUSE11 + EMC_DLL_XFORM_QUSE12 + EMC_DLL_XFORM_QUSE13 + EMC_DLL_XFORM_QUSE14 + EMC_DLL_XFORM_QUSE15 + EMC_DLI_TRIM_TXDQS0 + EMC_DLI_TRIM_TXDQS1 + EMC_DLI_TRIM_TXDQS2 + EMC_DLI_TRIM_TXDQS3 + EMC_DLI_TRIM_TXDQS4 + EMC_DLI_TRIM_TXDQS5 + EMC_DLI_TRIM_TXDQS6 + EMC_DLI_TRIM_TXDQS7 + EMC_DLI_TRIM_TXDQS8 + EMC_DLI_TRIM_TXDQS9 + EMC_DLI_TRIM_TXDQS10 + EMC_DLI_TRIM_TXDQS11 + EMC_DLI_TRIM_TXDQS12 + EMC_DLI_TRIM_TXDQS13 + EMC_DLI_TRIM_TXDQS14 + EMC_DLI_TRIM_TXDQS15 + EMC_DLL_XFORM_DQ0 + EMC_DLL_XFORM_DQ1 + EMC_DLL_XFORM_DQ2 + EMC_DLL_XFORM_DQ3 + EMC_DLL_XFORM_DQ4 + EMC_DLL_XFORM_DQ5 + EMC_DLL_XFORM_DQ6 + EMC_DLL_XFORM_DQ7 + EMC_XM2CMDPADCTRL + EMC_XM2CMDPADCTRL4 + EMC_XM2CMDPADCTRL5 + EMC_XM2DQPADCTRL2 + EMC_XM2DQPADCTRL3 + EMC_XM2CLKPADCTRL + EMC_XM2CLKPADCTRL2 + EMC_XM2COMPPADCTRL + EMC_XM2VTTGENPADCTRL + EMC_XM2VTTGENPADCTRL2 + EMC_XM2VTTGENPADCTRL3 + EMC_XM2DQSPADCTRL3 + EMC_XM2DQSPADCTRL4 + EMC_XM2DQSPADCTRL5 + EMC_XM2DQSPADCTRL6 + EMC_DSR_VTTGEN_DRV + EMC_TXDSRVTTGEN + EMC_FBIO_SPARE + EMC_ZCAL_WAIT_CNT + EMC_MRS_WAIT_CNT2 + EMC_CTT + EMC_CTT_DURATION + EMC_CFG_PIPE + EMC_DYN_SELF_REF_CONTROL + EMC_QPOP + +Example SoC include file: + +/ { + emc@7001b000 { + compatible = "nvidia,tegra124-emc"; + reg = <0x0 0x7001b000 0x0 0x1000>; + + nvidia,memory-controller = <&mc>; + }; +}; + +Example board file: + +/ { + emc@7001b000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 /* EMC_RC */ + 0x00000003 /* EMC_RFC */ + 0x00000000 /* EMC_RFC_SLR */ + 0x00000000 /* EMC_RAS */ + 0x00000000 /* EMC_RP */ + 0x00000004 /* EMC_R2W */ + 0x0000000a /* EMC_W2R */ + 0x00000003 /* EMC_R2P */ + 0x0000000b /* EMC_W2P */ + 0x00000000 /* EMC_RD_RCD */ + 0x00000000 /* EMC_WR_RCD */ + 0x00000003 /* EMC_RRD */ + 0x00000003 /* EMC_REXT */ + 0x00000000 /* EMC_WEXT */ + 0x00000006 /* EMC_WDV */ + 0x00000006 /* EMC_WDV_MASK */ + 0x00000006 /* EMC_QUSE */ + 0x00000002 /* EMC_QUSE_WIDTH */ + 0x00000000 /* EMC_IBDLY */ + 0x00000005 /* EMC_EINPUT */ + 0x00000005 /* EMC_EINPUT_DURATION */ + 0x00010000 /* EMC_PUTERM_EXTRA */ + 0x00000003 /* EMC_PUTERM_WIDTH */ + 0x00000000 /* EMC_PUTERM_ADJ */ + 0x00000000 /* EMC_CDB_CNTL_1 */ + 0x00000000 /* EMC_CDB_CNTL_2 */ + 0x00000000 /* EMC_CDB_CNTL_3 */ + 0x00000004 /* EMC_QRST */ + 0x0000000c /* EMC_QSAFE */ + 0x0000000d /* EMC_RDV */ + 0x0000000f /* EMC_RDV_MASK */ + 0x00000060 /* EMC_REFRESH */ + 0x00000000 /* EMC_BURST_REFRESH_NUM */ + 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ + 0x00000002 /* EMC_PDEX2WR */ + 0x00000002 /* EMC_PDEX2RD */ + 0x00000001 /* EMC_PCHG2PDEN */ + 0x00000000 /* EMC_ACT2PDEN */ + 0x00000007 /* EMC_AR2PDEN */ + 0x0000000f /* EMC_RW2PDEN */ + 0x00000005 /* EMC_TXSR */ + 0x00000005 /* EMC_TXSRDLL */ + 0x00000004 /* EMC_TCKE */ + 0x00000005 /* EMC_TCKESR */ + 0x00000004 /* EMC_TPD */ + 0x00000000 /* EMC_TFAW */ + 0x00000000 /* EMC_TRPAB */ + 0x00000005 /* EMC_TCLKSTABLE */ + 0x00000005 /* EMC_TCLKSTOP */ + 0x00000064 /* EMC_TREFBW */ + 0x00000000 /* EMC_FBIO_CFG6 */ + 0x00000000 /* EMC_ODT_WRITE */ + 0x00000000 /* EMC_ODT_READ */ + 0x106aa298 /* EMC_FBIO_CFG5 */ + 0x002c00a0 /* EMC_CFG_DIG_DLL */ + 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ + 0x00064000 /* EMC_DLL_XFORM_DQS0 */ + 0x00064000 /* EMC_DLL_XFORM_DQS1 */ + 0x00064000 /* EMC_DLL_XFORM_DQS2 */ + 0x00064000 /* EMC_DLL_XFORM_DQS3 */ + 0x00064000 /* EMC_DLL_XFORM_DQS4 */ + 0x00064000 /* EMC_DLL_XFORM_DQS5 */ + 0x00064000 /* EMC_DLL_XFORM_DQS6 */ + 0x00064000 /* EMC_DLL_XFORM_DQS7 */ + 0x00064000 /* EMC_DLL_XFORM_DQS8 */ + 0x00064000 /* EMC_DLL_XFORM_DQS9 */ + 0x00064000 /* EMC_DLL_XFORM_DQS10 */ + 0x00064000 /* EMC_DLL_XFORM_DQS11 */ + 0x00064000 /* EMC_DLL_XFORM_DQS12 */ + 0x00064000 /* EMC_DLL_XFORM_DQS13 */ + 0x00064000 /* EMC_DLL_XFORM_DQS14 */ + 0x00064000 /* EMC_DLL_XFORM_DQS15 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ + 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ + 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ + 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ + 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ + 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ + 0x10000280 /* EMC_XM2CMDPADCTRL */ + 0x00000000 /* EMC_XM2CMDPADCTRL4 */ + 0x00111111 /* EMC_XM2CMDPADCTRL5 */ + 0x00000000 /* EMC_XM2DQPADCTRL2 */ + 0x00000000 /* EMC_XM2DQPADCTRL3 */ + 0x77ffc081 /* EMC_XM2CLKPADCTRL */ + 0x00000e0e /* EMC_XM2CLKPADCTRL2 */ + 0x81f1f108 /* EMC_XM2COMPPADCTRL */ + 0x07070004 /* EMC_XM2VTTGENPADCTRL */ + 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ + 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ + 0x51451400 /* EMC_XM2DQSPADCTRL3 */ + 0x00514514 /* EMC_XM2DQSPADCTRL4 */ + 0x00514514 /* EMC_XM2DQSPADCTRL5 */ + 0x51451400 /* EMC_XM2DQSPADCTRL6 */ + 0x0000003f /* EMC_DSR_VTTGEN_DRV */ + 0x00000007 /* EMC_TXDSRVTTGEN */ + 0x00000000 /* EMC_FBIO_SPARE */ + 0x00000042 /* EMC_ZCAL_WAIT_CNT */ + 0x000e000e /* EMC_MRS_WAIT_CNT2 */ + 0x00000000 /* EMC_CTT */ + 0x00000003 /* EMC_CTT_DURATION */ + 0x0000f2f3 /* EMC_CFG_PIPE */ + 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ + 0x0000000a /* EMC_QPOP */ + >; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt new file mode 100644 index 000000000000..8dbe47013c2b --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.txt @@ -0,0 +1,116 @@ +NVIDIA Tegra Memory Controller device tree bindings +=================================================== + +memory-controller node +---------------------- + +Required properties: +- compatible: Should be "nvidia,tegra-mc" +- reg: Physical base address and length of the controller's registers. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - mc: the module's clock input +- interrupts: The interrupt outputs from the controller. +- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines + the SWGROUP of the master. + +This device implements an IOMMU that complies with the generic IOMMU binding. +See ../iommu/iommu.txt for details. + +emc-timings subnode +------------------- + +The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in +register PMC_STRAPPING_OPT_A). + +Required properties for "emc-timings" nodes : +- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for. + +timing subnode +-------------- + +Each "emc-timings" node should contain a subnode for every supported EMC clock rate. + +Required properties for timing nodes : +- clock-frequency : Should contain the memory clock rate in Hz. +- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC +(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be +specified, according to the board documentation: + + MC_EMEM_ARB_CFG + MC_EMEM_ARB_OUTSTANDING_REQ + MC_EMEM_ARB_TIMING_RCD + MC_EMEM_ARB_TIMING_RP + MC_EMEM_ARB_TIMING_RC + MC_EMEM_ARB_TIMING_RAS + MC_EMEM_ARB_TIMING_FAW + MC_EMEM_ARB_TIMING_RRD + MC_EMEM_ARB_TIMING_RAP2PRE + MC_EMEM_ARB_TIMING_WAP2PRE + MC_EMEM_ARB_TIMING_R2R + MC_EMEM_ARB_TIMING_W2W + MC_EMEM_ARB_TIMING_R2W + MC_EMEM_ARB_TIMING_W2R + MC_EMEM_ARB_DA_TURNS + MC_EMEM_ARB_DA_COVERS + MC_EMEM_ARB_MISC0 + MC_EMEM_ARB_MISC1 + MC_EMEM_ARB_RING1_THROTTLE + +Example SoC include file: + +/ { + mc: memory-controller@70019000 { + compatible = "nvidia,tegra124-mc"; + reg = <0x0 0x70019000 0x0 0x1000>; + clocks = <&tegra_car TEGRA124_CLK_MC>; + clock-names = "mc"; + + interrupts = ; + + #iommu-cells = <1>; + }; + + sdhci@700b0000 { + compatible = "nvidia,tegra124-sdhci"; + ... + iommus = <&mc TEGRA_SWGROUP_SDMMC1A>; + }; +}; + +Example board file: + +/ { + memory-controller@70019000 { + emc-timings-3 { + nvidia,ram-code = <3>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 /* MC_EMEM_ARB_CFG */ + 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RP */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RC */ + 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */ + 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */ + 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */ + 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */ + 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */ + 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */ + 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */ + 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */ + 0x06030203 /* MC_EMEM_ARB_DA_TURNS */ + 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */ + 0x77e30303 /* MC_EMEM_ARB_MISC0 */ + 0x70000f03 /* MC_EMEM_ARB_MISC1 */ + 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */ + >; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt deleted file mode 100644 index ba0bc3f12419..000000000000 --- a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt +++ /dev/null @@ -1,374 +0,0 @@ -NVIDIA Tegra124 SoC EMC (external memory controller) -==================================================== - -Required properties : -- compatible : Should be "nvidia,tegra124-emc". -- reg : physical base address and length of the controller's registers. -- nvidia,memory-controller : phandle of the MC driver. - -The node should contain a "emc-timings" subnode for each supported RAM type -(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address -being its RAM_CODE. - -Required properties for "emc-timings" nodes : -- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is -used for. - -Each "emc-timings" node should contain a "timing" subnode for every supported -EMC clock rate. The "timing" subnodes should have the clock rate in Hz as -their unit address. - -Required properties for "timing" nodes : -- clock-frequency : Should contain the memory clock rate in Hz. -- The following properties contain EMC timing characterization values -(specified in the board documentation) : - - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG - - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2 - - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3 - - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL - - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0 - - nvidia,emc-cfg : EMC_CFG - - nvidia,emc-cfg-2 : EMC_CFG_2 - - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL - - nvidia,emc-mode-1 : Mode Register 1 - - nvidia,emc-mode-2 : Mode Register 2 - - nvidia,emc-mode-4 : Mode Register 4 - - nvidia,emc-mode-reset : Mode Register 0 - - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT - - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL - - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2 - - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change - - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL -- nvidia,emc-configuration : EMC timing characterization data. These are the -registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to -be specified, according to the board documentation: - - EMC_RC - EMC_RFC - EMC_RFC_SLR - EMC_RAS - EMC_RP - EMC_R2W - EMC_W2R - EMC_R2P - EMC_W2P - EMC_RD_RCD - EMC_WR_RCD - EMC_RRD - EMC_REXT - EMC_WEXT - EMC_WDV - EMC_WDV_MASK - EMC_QUSE - EMC_QUSE_WIDTH - EMC_IBDLY - EMC_EINPUT - EMC_EINPUT_DURATION - EMC_PUTERM_EXTRA - EMC_PUTERM_WIDTH - EMC_PUTERM_ADJ - EMC_CDB_CNTL_1 - EMC_CDB_CNTL_2 - EMC_CDB_CNTL_3 - EMC_QRST - EMC_QSAFE - EMC_RDV - EMC_RDV_MASK - EMC_REFRESH - EMC_BURST_REFRESH_NUM - EMC_PRE_REFRESH_REQ_CNT - EMC_PDEX2WR - EMC_PDEX2RD - EMC_PCHG2PDEN - EMC_ACT2PDEN - EMC_AR2PDEN - EMC_RW2PDEN - EMC_TXSR - EMC_TXSRDLL - EMC_TCKE - EMC_TCKESR - EMC_TPD - EMC_TFAW - EMC_TRPAB - EMC_TCLKSTABLE - EMC_TCLKSTOP - EMC_TREFBW - EMC_FBIO_CFG6 - EMC_ODT_WRITE - EMC_ODT_READ - EMC_FBIO_CFG5 - EMC_CFG_DIG_DLL - EMC_CFG_DIG_DLL_PERIOD - EMC_DLL_XFORM_DQS0 - EMC_DLL_XFORM_DQS1 - EMC_DLL_XFORM_DQS2 - EMC_DLL_XFORM_DQS3 - EMC_DLL_XFORM_DQS4 - EMC_DLL_XFORM_DQS5 - EMC_DLL_XFORM_DQS6 - EMC_DLL_XFORM_DQS7 - EMC_DLL_XFORM_DQS8 - EMC_DLL_XFORM_DQS9 - EMC_DLL_XFORM_DQS10 - EMC_DLL_XFORM_DQS11 - EMC_DLL_XFORM_DQS12 - EMC_DLL_XFORM_DQS13 - EMC_DLL_XFORM_DQS14 - EMC_DLL_XFORM_DQS15 - EMC_DLL_XFORM_QUSE0 - EMC_DLL_XFORM_QUSE1 - EMC_DLL_XFORM_QUSE2 - EMC_DLL_XFORM_QUSE3 - EMC_DLL_XFORM_QUSE4 - EMC_DLL_XFORM_QUSE5 - EMC_DLL_XFORM_QUSE6 - EMC_DLL_XFORM_QUSE7 - EMC_DLL_XFORM_ADDR0 - EMC_DLL_XFORM_ADDR1 - EMC_DLL_XFORM_ADDR2 - EMC_DLL_XFORM_ADDR3 - EMC_DLL_XFORM_ADDR4 - EMC_DLL_XFORM_ADDR5 - EMC_DLL_XFORM_QUSE8 - EMC_DLL_XFORM_QUSE9 - EMC_DLL_XFORM_QUSE10 - EMC_DLL_XFORM_QUSE11 - EMC_DLL_XFORM_QUSE12 - EMC_DLL_XFORM_QUSE13 - EMC_DLL_XFORM_QUSE14 - EMC_DLL_XFORM_QUSE15 - EMC_DLI_TRIM_TXDQS0 - EMC_DLI_TRIM_TXDQS1 - EMC_DLI_TRIM_TXDQS2 - EMC_DLI_TRIM_TXDQS3 - EMC_DLI_TRIM_TXDQS4 - EMC_DLI_TRIM_TXDQS5 - EMC_DLI_TRIM_TXDQS6 - EMC_DLI_TRIM_TXDQS7 - EMC_DLI_TRIM_TXDQS8 - EMC_DLI_TRIM_TXDQS9 - EMC_DLI_TRIM_TXDQS10 - EMC_DLI_TRIM_TXDQS11 - EMC_DLI_TRIM_TXDQS12 - EMC_DLI_TRIM_TXDQS13 - EMC_DLI_TRIM_TXDQS14 - EMC_DLI_TRIM_TXDQS15 - EMC_DLL_XFORM_DQ0 - EMC_DLL_XFORM_DQ1 - EMC_DLL_XFORM_DQ2 - EMC_DLL_XFORM_DQ3 - EMC_DLL_XFORM_DQ4 - EMC_DLL_XFORM_DQ5 - EMC_DLL_XFORM_DQ6 - EMC_DLL_XFORM_DQ7 - EMC_XM2CMDPADCTRL - EMC_XM2CMDPADCTRL4 - EMC_XM2CMDPADCTRL5 - EMC_XM2DQPADCTRL2 - EMC_XM2DQPADCTRL3 - EMC_XM2CLKPADCTRL - EMC_XM2CLKPADCTRL2 - EMC_XM2COMPPADCTRL - EMC_XM2VTTGENPADCTRL - EMC_XM2VTTGENPADCTRL2 - EMC_XM2VTTGENPADCTRL3 - EMC_XM2DQSPADCTRL3 - EMC_XM2DQSPADCTRL4 - EMC_XM2DQSPADCTRL5 - EMC_XM2DQSPADCTRL6 - EMC_DSR_VTTGEN_DRV - EMC_TXDSRVTTGEN - EMC_FBIO_SPARE - EMC_ZCAL_WAIT_CNT - EMC_MRS_WAIT_CNT2 - EMC_CTT - EMC_CTT_DURATION - EMC_CFG_PIPE - EMC_DYN_SELF_REF_CONTROL - EMC_QPOP - -Example SoC include file: - -/ { - emc@7001b000 { - compatible = "nvidia,tegra124-emc"; - reg = <0x0 0x7001b000 0x0 0x1000>; - - nvidia,memory-controller = <&mc>; - }; -}; - -Example board file: - -/ { - emc@7001b000 { - emc-timings-3 { - nvidia,ram-code = <3>; - - timing-12750000 { - clock-frequency = <12750000>; - - nvidia,emc-zcal-cnt-long = <0x00000042>; - nvidia,emc-auto-cal-interval = <0x001fffff>; - nvidia,emc-ctt-term-ctrl = <0x00000802>; - nvidia,emc-cfg = <0x73240000>; - nvidia,emc-cfg-2 = <0x000008c5>; - nvidia,emc-sel-dpd-ctrl = <0x00040128>; - nvidia,emc-bgbias-ctl0 = <0x00000008>; - nvidia,emc-auto-cal-config = <0xa1430000>; - nvidia,emc-auto-cal-config2 = <0x00000000>; - nvidia,emc-auto-cal-config3 = <0x00000000>; - nvidia,emc-mode-reset = <0x80001221>; - nvidia,emc-mode-1 = <0x80100003>; - nvidia,emc-mode-2 = <0x80200008>; - nvidia,emc-mode-4 = <0x00000000>; - - nvidia,emc-configuration = < - 0x00000000 /* EMC_RC */ - 0x00000003 /* EMC_RFC */ - 0x00000000 /* EMC_RFC_SLR */ - 0x00000000 /* EMC_RAS */ - 0x00000000 /* EMC_RP */ - 0x00000004 /* EMC_R2W */ - 0x0000000a /* EMC_W2R */ - 0x00000003 /* EMC_R2P */ - 0x0000000b /* EMC_W2P */ - 0x00000000 /* EMC_RD_RCD */ - 0x00000000 /* EMC_WR_RCD */ - 0x00000003 /* EMC_RRD */ - 0x00000003 /* EMC_REXT */ - 0x00000000 /* EMC_WEXT */ - 0x00000006 /* EMC_WDV */ - 0x00000006 /* EMC_WDV_MASK */ - 0x00000006 /* EMC_QUSE */ - 0x00000002 /* EMC_QUSE_WIDTH */ - 0x00000000 /* EMC_IBDLY */ - 0x00000005 /* EMC_EINPUT */ - 0x00000005 /* EMC_EINPUT_DURATION */ - 0x00010000 /* EMC_PUTERM_EXTRA */ - 0x00000003 /* EMC_PUTERM_WIDTH */ - 0x00000000 /* EMC_PUTERM_ADJ */ - 0x00000000 /* EMC_CDB_CNTL_1 */ - 0x00000000 /* EMC_CDB_CNTL_2 */ - 0x00000000 /* EMC_CDB_CNTL_3 */ - 0x00000004 /* EMC_QRST */ - 0x0000000c /* EMC_QSAFE */ - 0x0000000d /* EMC_RDV */ - 0x0000000f /* EMC_RDV_MASK */ - 0x00000060 /* EMC_REFRESH */ - 0x00000000 /* EMC_BURST_REFRESH_NUM */ - 0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */ - 0x00000002 /* EMC_PDEX2WR */ - 0x00000002 /* EMC_PDEX2RD */ - 0x00000001 /* EMC_PCHG2PDEN */ - 0x00000000 /* EMC_ACT2PDEN */ - 0x00000007 /* EMC_AR2PDEN */ - 0x0000000f /* EMC_RW2PDEN */ - 0x00000005 /* EMC_TXSR */ - 0x00000005 /* EMC_TXSRDLL */ - 0x00000004 /* EMC_TCKE */ - 0x00000005 /* EMC_TCKESR */ - 0x00000004 /* EMC_TPD */ - 0x00000000 /* EMC_TFAW */ - 0x00000000 /* EMC_TRPAB */ - 0x00000005 /* EMC_TCLKSTABLE */ - 0x00000005 /* EMC_TCLKSTOP */ - 0x00000064 /* EMC_TREFBW */ - 0x00000000 /* EMC_FBIO_CFG6 */ - 0x00000000 /* EMC_ODT_WRITE */ - 0x00000000 /* EMC_ODT_READ */ - 0x106aa298 /* EMC_FBIO_CFG5 */ - 0x002c00a0 /* EMC_CFG_DIG_DLL */ - 0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */ - 0x00064000 /* EMC_DLL_XFORM_DQS0 */ - 0x00064000 /* EMC_DLL_XFORM_DQS1 */ - 0x00064000 /* EMC_DLL_XFORM_DQS2 */ - 0x00064000 /* EMC_DLL_XFORM_DQS3 */ - 0x00064000 /* EMC_DLL_XFORM_DQS4 */ - 0x00064000 /* EMC_DLL_XFORM_DQS5 */ - 0x00064000 /* EMC_DLL_XFORM_DQS6 */ - 0x00064000 /* EMC_DLL_XFORM_DQS7 */ - 0x00064000 /* EMC_DLL_XFORM_DQS8 */ - 0x00064000 /* EMC_DLL_XFORM_DQS9 */ - 0x00064000 /* EMC_DLL_XFORM_DQS10 */ - 0x00064000 /* EMC_DLL_XFORM_DQS11 */ - 0x00064000 /* EMC_DLL_XFORM_DQS12 */ - 0x00064000 /* EMC_DLL_XFORM_DQS13 */ - 0x00064000 /* EMC_DLL_XFORM_DQS14 */ - 0x00064000 /* EMC_DLL_XFORM_DQS15 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE0 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE1 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE2 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE3 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE4 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE5 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE6 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE7 */ - 0x00000000 /* EMC_DLL_XFORM_ADDR0 */ - 0x00000000 /* EMC_DLL_XFORM_ADDR1 */ - 0x00000000 /* EMC_DLL_XFORM_ADDR2 */ - 0x00000000 /* EMC_DLL_XFORM_ADDR3 */ - 0x00000000 /* EMC_DLL_XFORM_ADDR4 */ - 0x00000000 /* EMC_DLL_XFORM_ADDR5 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE8 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE9 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE10 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE11 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE12 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE13 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE14 */ - 0x00000000 /* EMC_DLL_XFORM_QUSE15 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS0 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS1 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS2 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS3 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS4 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS5 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS6 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS7 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS8 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS9 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS10 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS11 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS12 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS13 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS14 */ - 0x00000000 /* EMC_DLI_TRIM_TXDQS15 */ - 0x000fc000 /* EMC_DLL_XFORM_DQ0 */ - 0x000fc000 /* EMC_DLL_XFORM_DQ1 */ - 0x000fc000 /* EMC_DLL_XFORM_DQ2 */ - 0x000fc000 /* EMC_DLL_XFORM_DQ3 */ - 0x0000fc00 /* EMC_DLL_XFORM_DQ4 */ - 0x0000fc00 /* EMC_DLL_XFORM_DQ5 */ - 0x0000fc00 /* EMC_DLL_XFORM_DQ6 */ - 0x0000fc00 /* EMC_DLL_XFORM_DQ7 */ - 0x10000280 /* EMC_XM2CMDPADCTRL */ - 0x00000000 /* EMC_XM2CMDPADCTRL4 */ - 0x00111111 /* EMC_XM2CMDPADCTRL5 */ - 0x00000000 /* EMC_XM2DQPADCTRL2 */ - 0x00000000 /* EMC_XM2DQPADCTRL3 */ - 0x77ffc081 /* EMC_XM2CLKPADCTRL */ - 0x00000e0e /* EMC_XM2CLKPADCTRL2 */ - 0x81f1f108 /* EMC_XM2COMPPADCTRL */ - 0x07070004 /* EMC_XM2VTTGENPADCTRL */ - 0x0000003f /* EMC_XM2VTTGENPADCTRL2 */ - 0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */ - 0x51451400 /* EMC_XM2DQSPADCTRL3 */ - 0x00514514 /* EMC_XM2DQSPADCTRL4 */ - 0x00514514 /* EMC_XM2DQSPADCTRL5 */ - 0x51451400 /* EMC_XM2DQSPADCTRL6 */ - 0x0000003f /* EMC_DSR_VTTGEN_DRV */ - 0x00000007 /* EMC_TXDSRVTTGEN */ - 0x00000000 /* EMC_FBIO_SPARE */ - 0x00000042 /* EMC_ZCAL_WAIT_CNT */ - 0x000e000e /* EMC_MRS_WAIT_CNT2 */ - 0x00000000 /* EMC_CTT */ - 0x00000003 /* EMC_CTT_DURATION */ - 0x0000f2f3 /* EMC_CFG_PIPE */ - 0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */ - 0x0000000a /* EMC_QPOP */ - >; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt new file mode 100644 index 000000000000..6908d3aca598 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt @@ -0,0 +1,55 @@ +Tegra124 SOCTHERM thermal management system + +The SOCTHERM IP block contains thermal sensors, support for polled +or interrupt-based thermal monitoring, CPU and GPU throttling based +on temperature trip points, and handling external overcurrent +notifications. It is also used to manage emergency shutdown in an +overheating situation. + +Required properties : +- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm". + For Tegra132, must contain "nvidia,tegra132-soctherm". + For Tegra210, must contain "nvidia,tegra210-soctherm". +- reg : Should contain 1 entry: + - SOCTHERM register set +- interrupts : Defines the interrupt used by SOCTHERM +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - tsensor + - soctherm +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include the following entries: + - soctherm +- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description + of this property. See for a + list of valid values when referring to thermal sensors. + + +Example : + + soctherm@700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + + #thermal-sensor-cells = <1>; + }; + +Example: referring to thermal sensors : + + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt deleted file mode 100644 index 6908d3aca598..000000000000 --- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt +++ /dev/null @@ -1,55 +0,0 @@ -Tegra124 SOCTHERM thermal management system - -The SOCTHERM IP block contains thermal sensors, support for polled -or interrupt-based thermal monitoring, CPU and GPU throttling based -on temperature trip points, and handling external overcurrent -notifications. It is also used to manage emergency shutdown in an -overheating situation. - -Required properties : -- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm". - For Tegra132, must contain "nvidia,tegra132-soctherm". - For Tegra210, must contain "nvidia,tegra210-soctherm". -- reg : Should contain 1 entry: - - SOCTHERM register set -- interrupts : Defines the interrupt used by SOCTHERM -- clocks : Must contain an entry for each entry in clock-names. - See ../clocks/clock-bindings.txt for details. -- clock-names : Must include the following entries: - - tsensor - - soctherm -- resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. -- reset-names : Must include the following entries: - - soctherm -- #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description - of this property. See for a - list of valid values when referring to thermal sensors. - - -Example : - - soctherm@700e2000 { - compatible = "nvidia,tegra124-soctherm"; - reg = <0x0 0x700e2000 0x0 0x1000>; - interrupts = ; - clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, - <&tegra_car TEGRA124_CLK_SOC_THERM>; - clock-names = "tsensor", "soctherm"; - resets = <&tegra_car 78>; - reset-names = "soctherm"; - - #thermal-sensor-cells = <1>; - }; - -Example: referring to thermal sensors : - - thermal-zones { - cpu { - polling-delay-passive = <1000>; - polling-delay = <1000>; - - thermal-sensors = - <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; - }; - };