From: Martin Blumenstingl Date: Sun, 11 Dec 2016 21:14:32 +0000 (+0100) Subject: firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a766347b15c01507db9bf01f9b7021be5a776691;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares The pre-1.0 SCPI firmwares are using single __le32 as sensor value, while the SCPI v1.0 protocol uses two __le32 as sensor values(64bit) split into 32bit upper and 32bit lower value. Using an "struct sensor_value" to read the sensor value on a pre-1.0 SCPI firmware gives garbage in the "hi_val" field. This patch fixes the issue by reading only the lower 32-bit value for all pre-1.0 SCPI versions. Suggested-by: Sudeep Holla Signed-off-by: Martin Blumenstingl [sudeep.holla@arm.com: updated the commit log to reflect the implementation] Signed-off-by: Sudeep Holla --- diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 70e13230d8db..9ad0b1934be9 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -721,11 +721,17 @@ static int scpi_sensor_get_value(u16 sensor, u64 *val) ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id), &buf, sizeof(buf)); - if (!ret) + if (ret) + return ret; + + if (scpi_info->is_legacy) + /* only 32-bits supported, hi_val can be junk */ + *val = le32_to_cpu(buf.lo_val); + else *val = (u64)le32_to_cpu(buf.hi_val) << 32 | le32_to_cpu(buf.lo_val); - return ret; + return 0; } static int scpi_device_get_power_state(u16 dev_id)