From: H Hartley Sweeten Date: Fri, 8 Apr 2016 19:42:05 +0000 (-0700) Subject: staging: comedi: das1800: allow setting the external trigger polarity X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a6b7dbb2be27636e80e4124f157e08b33e451b80;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git staging: comedi: das1800: allow setting the external trigger polarity The external pin TGIN can be used to start and/or stop the analog input command. Currently the driver only supports negative edge polarity for this signal. Add support to allow the user to select positive edge polarity using the CR_INVERT flag. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c index bfbc2bbbce10..875b6f504626 100644 --- a/drivers/staging/comedi/drivers/das1800.c +++ b/drivers/staging/comedi/drivers/das1800.c @@ -60,6 +60,9 @@ * If TRIG_EXT is used for both the start_src and stop_src, the first TGIN * trigger starts the command, and the second trigger will stop it. If only * one is TRIG_EXT, the first trigger will either stop or start the command. + * The external pin TGIN is normally set for negative edge triggering. It + * can be set to positive edge with the CR_INVERT flag. If TRIG_EXT is used + * for both the start_src and stop_src they must have the same polarity. * * Minimum conversion speed is limited to 64 microseconds (convert_arg <= 64000) * for 'burst' scans. This limitation does not apply for 'paced' scans. The @@ -105,6 +108,7 @@ #define CGSL 0x8 #define TGEN 0x10 #define TGSL 0x20 +#define TGPL 0x40 #define ATEN 0x80 #define DAS1800_CONTROL_B 0x5 #define DMA_CH5 0x1 @@ -671,12 +675,18 @@ static int das1800_ai_cmdtest(struct comedi_device *dev, cmd->convert_src != TRIG_TIMER) err |= -EINVAL; + /* the external pin TGIN must use the same polarity */ + if (cmd->start_src == TRIG_EXT && cmd->stop_src == TRIG_EXT) + err |= comedi_check_trigger_arg_is(&cmd->start_arg, + cmd->stop_arg); + if (err) return 2; /* Step 3: check if arguments are trivially valid */ - err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0); + if (cmd->start_arg == TRIG_NOW) + err |= comedi_check_trigger_arg_is(&cmd->start_arg, 0); if (cmd->convert_src == TRIG_TIMER) { err |= comedi_check_trigger_arg_min(&cmd->convert_arg, @@ -868,6 +878,10 @@ static int das1800_ai_cmd(struct comedi_device *dev, control_a |= TGEN | CGSL; else /* TRIG_NOW */ control_a |= CGEN; + if (control_a & (ATEN | TGEN)) { + if ((cmd->start_arg & CR_INVERT) || (cmd->stop_arg & CR_INVERT)) + control_a |= TGPL; + } control_c = das1800_ai_chanspec_bits(s, cmd->chanlist[0]); /* set clock source to internal or external */