From: Feng Tang <feng.tang@intel.com>
Date: Fri, 19 Nov 2010 03:01:48 +0000 (+0800)
Subject: serial: mfd: adjust the baud rate setting
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a5880a9e5bb40fbae55de60051d69a29091053c3;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git

serial: mfd: adjust the baud rate setting

Previous baud rate setting code only has been tested with 3.5M/9600/
115200/230400/460800 bps, and recently we got a 3M bps device to test,
which needs to modify current MUL register setting, and with this
patch 2.5M/2M/1.5M/1M/0.5M should also work as they just use a MUL
value scale down from 3M's.

Also got some reference register setting from silicon guys for
different baud rates, which tries to keep the pre-scalar register value
to 16.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 5fc699e929d..d40010a22ec 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -900,8 +900,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
-	u32 mul = 0x3600;
-	u32 ps = 0x10;
+	u32 ps, mul;
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
@@ -943,31 +942,24 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 	baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
 
 	quot = 1;
+	ps = 0x10;
+	mul = 0x3600;
 	switch (baud) {
 	case 3500000:
 		mul = 0x3345;
 		ps = 0xC;
 		break;
-	case 3000000:
-		mul = 0x2EE0;
-		break;
-	case 2500000:
-		mul = 0x2710;
-		break;
-	case 2000000:
-		mul = 0x1F40;
-		break;
 	case 1843200:
 		mul = 0x2400;
 		break;
+	case 3000000:
+	case 2500000:
+	case 2000000:
 	case 1500000:
-		mul = 0x1770;
-		break;
 	case 1000000:
-		mul = 0xFA0;
-		break;
 	case 500000:
-		mul = 0x7D0;
+		/* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+		mul = baud / 500000 * 0x9C4;
 		break;
 	default:
 		/* Use uart_get_divisor to get quot for other baud rates */