From: Antti Palosaari Date: Thu, 7 Jun 2012 23:36:35 +0000 (-0300) Subject: [media] af9015: switch to new DVB-USB X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a3645e5430dbcc1b4116bd5add450c5bba9b6c45;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [media] af9015: switch to new DVB-USB Almost all hacks are now removed and much less code. Reducing af9015 driver code from 2084 to 1609, it is almost 500 LOC less! Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index a6ffdb322041..2f6973a24cc6 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -341,7 +341,7 @@ config DVB_USB_DTV5100 config DVB_USB_AF9015 tristate "Afatech AF9015 DVB-T USB2.0 support" - depends on DVB_USB + depends on DVB_USB_V2 select DVB_AF9013 select DVB_PLL if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 677fed79b01e..fe5ef3a03edc 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -21,18 +21,7 @@ * */ -#include -#include - #include "af9015.h" -#include "af9013.h" -#include "mt2060.h" -#include "qt1010.h" -#include "tda18271.h" -#include "mxl5005s.h" -#include "mc44s803.h" -#include "tda18218.h" -#include "mxl5007t.h" static int dvb_usb_af9015_debug; module_param_named(debug, dvb_usb_af9015_debug, int, 0644); @@ -42,44 +31,18 @@ module_param_named(remote, dvb_usb_af9015_remote, int, 0644); MODULE_PARM_DESC(remote, "select remote"); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -static DEFINE_MUTEX(af9015_usb_mutex); - -static struct af9015_config af9015_config; -static struct dvb_usb_device_properties af9015_properties[3]; -static int af9015_properties_count = ARRAY_SIZE(af9015_properties); - -static struct af9013_config af9015_af9013_config[] = { - { - .i2c_addr = AF9015_I2C_DEMOD, - .ts_mode = AF9013_TS_USB, - .api_version = { 0, 1, 9, 0 }, - .gpio[0] = AF9013_GPIO_HI, - .gpio[3] = AF9013_GPIO_TUNER_ON, - - }, { - .ts_mode = AF9013_TS_SERIAL, - .api_version = { 0, 1, 9, 0 }, - .gpio[0] = AF9013_GPIO_TUNER_ON, - .gpio[1] = AF9013_GPIO_LO, - } -}; - -static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) +static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) { #define BUF_LEN 63 #define REQ_HDR_LEN 8 /* send header size */ #define ACK_HDR_LEN 2 /* rece header size */ - int act_len, ret; + struct af9015_state *state = d->priv; + int ret, wlen, rlen; u8 buf[BUF_LEN]; u8 write = 1; - u8 msg_len = REQ_HDR_LEN; - static u8 seq; /* packet sequence number */ - - if (mutex_lock_interruptible(&af9015_usb_mutex) < 0) - return -EAGAIN; buf[0] = req->cmd; - buf[1] = seq++; + buf[1] = state->seq++; buf[2] = req->i2c_addr; buf[3] = req->addr >> 8; buf[4] = req->addr & 0xff; @@ -111,7 +74,7 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) default: err("unknown command:%d", req->cmd); ret = -1; - goto error_unlock; + goto error; } /* buffer overflow check */ @@ -119,73 +82,42 @@ static int af9015_rw_udev(struct usb_device *udev, struct req_t *req) (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) { err("too much data; cmd:%d len:%d", req->cmd, req->data_len); ret = -EINVAL; - goto error_unlock; + goto error; } - /* write requested */ + /* write receives seq + status = 2 bytes + read receives seq + status + data = 2 + N bytes */ + wlen = REQ_HDR_LEN; + rlen = ACK_HDR_LEN; if (write) { + wlen += req->data_len; memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len); - msg_len += req->data_len; + } else { + rlen += req->data_len; } - deb_xfer(">>> "); - debug_dump(buf, msg_len, deb_xfer); - - /* send req */ - ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len, - &act_len, AF9015_USB_TIMEOUT); - if (ret) - err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len); - else - if (act_len != msg_len) - ret = -1; /* all data is not send */ - if (ret) - goto error_unlock; - - /* no ack for those packets */ + /* no ack for these packets */ if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB) - goto exit_unlock; - - /* write receives seq + status = 2 bytes - read receives seq + status + data = 2 + N bytes */ - msg_len = ACK_HDR_LEN; - if (!write) - msg_len += req->data_len; - - ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len, - &act_len, AF9015_USB_TIMEOUT); - if (ret) { - err("recv bulk message failed:%d", ret); - ret = -1; - goto error_unlock; - } + rlen = 0; - deb_xfer("<<< "); - debug_dump(buf, act_len, deb_xfer); + ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen, 0); + if (ret) + goto error; /* check status */ - if (buf[1]) { + if (rlen && buf[1]) { err("command failed:%d", buf[1]); ret = -1; - goto error_unlock; + goto error; } /* read request, copy returned data to return buf */ if (!write) memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len); - -error_unlock: -exit_unlock: - mutex_unlock(&af9015_usb_mutex); - +error: return ret; } -static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req) -{ - return af9015_rw_udev(d->udev, req); -} - static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len) { @@ -194,11 +126,6 @@ static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val, return af9015_ctrl_msg(d, &req); } -static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) -{ - return af9015_write_regs(d, addr, &val, 1); -} - static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len) { struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len, @@ -206,6 +133,11 @@ static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len) return af9015_ctrl_msg(d, &req); } +static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val) +{ + return af9015_write_regs(d, addr, &val, 1); +} + static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) { return af9015_read_regs(d, addr, val, 1); @@ -214,10 +146,11 @@ static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val) static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, u8 val) { + struct af9015_state *state = d->priv; struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val}; - if (addr == af9015_af9013_config[0].i2c_addr || - addr == af9015_af9013_config[1].i2c_addr) + if (addr == state->af9013_config[0].i2c_addr || + addr == state->af9013_config[1].i2c_addr) req.addr_len = 3; return af9015_ctrl_msg(d, &req); @@ -226,19 +159,53 @@ static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg, u8 *val) { + struct af9015_state *state = d->priv; struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val}; - if (addr == af9015_af9013_config[0].i2c_addr || - addr == af9015_af9013_config[1].i2c_addr) + if (addr == state->af9013_config[0].i2c_addr || + addr == state->af9013_config[1].i2c_addr) req.addr_len = 3; return af9015_ctrl_msg(d, &req); } +static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) +{ + int ret; + u8 val, mask = 0x01; + + ret = af9015_read_reg(d, addr, &val); + if (ret) + return ret; + + mask <<= bit; + if (op) { + /* set bit */ + val |= mask; + } else { + /* clear bit */ + mask ^= 0xff; + val &= mask; + } + + return af9015_write_reg(d, addr, val); +} + +static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 1); +} + +static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +{ + return af9015_do_reg_bit(d, addr, bit, 0); +} + static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int num) { struct dvb_usb_device *d = i2c_get_adapdata(adap); + struct af9015_state *state = d->priv; int ret = 0, i = 0; u16 addr; u8 uninitialized_var(mbox), addr_len; @@ -270,8 +237,8 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. return -EAGAIN; while (i < num) { - if (msg[i].addr == af9015_af9013_config[0].i2c_addr || - msg[i].addr == af9015_af9013_config[1].i2c_addr) { + if (msg[i].addr == state->af9013_config[0].i2c_addr || + msg[i].addr == state->af9013_config[1].i2c_addr) { addr = msg[i].buf[0] << 8; addr += msg[i].buf[1]; mbox = msg[i].buf[2]; @@ -287,7 +254,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. ret = -EOPNOTSUPP; goto error; } - if (msg[i].addr == af9015_af9013_config[0].i2c_addr) + if (msg[i].addr == state->af9013_config[0].i2c_addr) req.cmd = READ_MEMORY; else req.cmd = READ_I2C; @@ -304,8 +271,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. ret = -EOPNOTSUPP; goto error; } - if (msg[i].addr == - af9015_af9013_config[0].i2c_addr) { + if (msg[i].addr == state->af9013_config[0].i2c_addr) { ret = -EINVAL; goto error; } @@ -323,7 +289,7 @@ Due to that the only way to select correct tuner is use demodulator I2C-gate. ret = -EOPNOTSUPP; goto error; } - if (msg[i].addr == af9015_af9013_config[0].i2c_addr) + if (msg[i].addr == state->af9013_config[0].i2c_addr) req.cmd = WRITE_MEMORY; else req.cmd = WRITE_I2C; @@ -358,595 +324,226 @@ static struct i2c_algorithm af9015_i2c_algo = { .functionality = af9015_i2c_func, }; -static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op) +static int af9015_identify_state(struct dvb_usb_device *d) { int ret; - u8 val, mask = 0x01; + u8 reply; + struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; - ret = af9015_read_reg(d, addr, &val); + ret = af9015_ctrl_msg(d, &req); if (ret) return ret; - mask <<= bit; - if (op) { - /* set bit */ - val |= mask; - } else { - /* clear bit */ - mask ^= 0xff; - val &= mask; - } - - return af9015_write_reg(d, addr, val); -} + deb_info("%s: reply:%02x\n", __func__, reply); + if (reply == 0x02) + ret = WARM; + else + ret = COLD; -static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) -{ - return af9015_do_reg_bit(d, addr, bit, 1); + return ret; } -static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit) +static int af9015_download_firmware(struct dvb_usb_device *d, + const struct firmware *fw) { - return af9015_do_reg_bit(d, addr, bit, 0); -} + struct af9015_state *state = d->priv; + int i, len, remaining, ret; + struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; + u16 checksum = 0; -static int af9015_init_endpoint(struct dvb_usb_device *d) -{ - int ret; - u16 frame_size; - u8 packet_size; - deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); + deb_info("%s:\n", __func__); - /* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0. - We use smaller - about 1/4 from the original, 5 and 87. */ -#define TS_PACKET_SIZE 188 + /* calc checksum */ + for (i = 0; i < fw->size; i++) + checksum += fw->data[i]; -#define TS_USB20_PACKET_COUNT 87 -#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) + state->firmware_size = fw->size; + state->firmware_checksum = checksum; -#define TS_USB11_PACKET_COUNT 5 -#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) + #define FW_ADDR 0x5100 /* firmware start address */ + #define LEN_MAX 55 /* max packet size */ + for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { + len = remaining; + if (len > LEN_MAX) + len = LEN_MAX; -#define TS_USB20_MAX_PACKET_SIZE 512 -#define TS_USB11_MAX_PACKET_SIZE 64 + req.data_len = len; + req.data = (u8 *) &fw->data[fw->size - remaining]; + req.addr = FW_ADDR + fw->size - remaining; - if (d->udev->speed == USB_SPEED_FULL) { - frame_size = TS_USB11_FRAME_SIZE/4; - packet_size = TS_USB11_MAX_PACKET_SIZE/4; - } else { - frame_size = TS_USB20_FRAME_SIZE/4; - packet_size = TS_USB20_MAX_PACKET_SIZE/4; + ret = af9015_ctrl_msg(d, &req); + if (ret) { + err("firmware download failed:%d", ret); + goto error; + } } - ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ - if (ret) - goto error; - ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ - if (ret) - goto error; - ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ - if (ret) + /* firmware loaded, request boot */ + req.cmd = BOOT; + req.data_len = 0; + ret = af9015_ctrl_msg(d, &req); + if (ret) { + err("firmware boot failed:%d", ret); goto error; - if (af9015_config.dual_mode) { - ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ - if (ret) - goto error; } - ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ - if (ret) - goto error; - if (af9015_config.dual_mode) { - ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ + +error: + return ret; +} + +/* hash (and dump) eeprom */ +static int af9015_eeprom_hash(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + int ret; + static const unsigned int eeprom_size = 256; + unsigned int reg; + u8 val, *eeprom; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; + + eeprom = kmalloc(eeprom_size, GFP_KERNEL); + if (eeprom == NULL) + return -ENOMEM; + + for (reg = 0; reg < eeprom_size; reg++) { + req.addr = reg; + ret = af9015_ctrl_msg(d, &req); if (ret) - goto error; + goto free; + + eeprom[reg] = val; } - /* EP4 xfer length */ - ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); - if (ret) - goto error; - /* EP5 xfer length */ - ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ - if (ret) - goto error; - ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ - if (ret) - goto error; - ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ - if (ret) - goto error; - if (af9015_config.dual_mode) { - ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ - if (ret) - goto error; + + if (dvb_usb_af9015_debug & 0x01) + print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom, + eeprom_size); + + BUG_ON(eeprom_size % 4); + + state->eeprom_sum = 0; + for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) { + state->eeprom_sum *= GOLDEN_RATIO_PRIME_32; + state->eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]); } - /* enable / disable mp2if2 */ - if (af9015_config.dual_mode) - ret = af9015_set_reg_bit(d, 0xd50b, 0); - else - ret = af9015_clear_reg_bit(d, 0xd50b, 0); + deb_info("%s: eeprom sum=%.8x\n", __func__, state->eeprom_sum); -error: - if (ret) - err("endpoint init failed:%d", ret); + ret = 0; +free: + kfree(eeprom); return ret; } -static int af9015_copy_firmware(struct dvb_usb_device *d) +static int af9015_read_config(struct dvb_usb_device *d) { + struct af9015_state *state = d->priv; int ret; - u8 fw_params[4]; - u8 val, i; - struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), - fw_params }; - deb_info("%s:\n", __func__); + u8 val, i, offset = 0; + struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - fw_params[0] = af9015_config.firmware_size >> 8; - fw_params[1] = af9015_config.firmware_size & 0xff; - fw_params[2] = af9015_config.firmware_checksum >> 8; - fw_params[3] = af9015_config.firmware_checksum & 0xff; + deb_info("%s:\n", __func__); - /* wait 2nd demodulator ready */ - msleep(100); + /* IR remote controller */ + req.addr = AF9015_EEPROM_IR_MODE; + /* first message will timeout often due to possible hw bug */ + for (i = 0; i < 4; i++) { + ret = af9015_ctrl_msg(d, &req); + if (!ret) + break; + } + if (ret) + goto error; - ret = af9015_read_reg_i2c(d, - af9015_af9013_config[1].i2c_addr, 0x98be, &val); + ret = af9015_eeprom_hash(d); if (ret) goto error; - else - deb_info("%s: firmware status:%02x\n", __func__, val); - if (val == 0x0c) /* fw is running, no need for download */ - goto exit; + deb_info("%s: IR mode=%d\n", __func__, val); + state->ir_mode = val; - /* set I2C master clock to fast (to speed up firmware copy) */ - ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ - if (ret) - goto error; - - msleep(50); - - /* copy firmware */ + /* TS mode - one or two receivers */ + req.addr = AF9015_EEPROM_TS_MODE; ret = af9015_ctrl_msg(d, &req); - if (ret) - err("firmware copy cmd failed:%d", ret); - deb_info("%s: firmware copy done\n", __func__); - - /* set I2C master clock back to normal */ - ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ - if (ret) - goto error; - - /* request boot firmware */ - ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].i2c_addr, - 0xe205, 1); - deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); - if (ret) - goto error; - - for (i = 0; i < 15; i++) { - msleep(100); - - /* check firmware status */ - ret = af9015_read_reg_i2c(d, - af9015_af9013_config[1].i2c_addr, 0x98be, &val); - deb_info("%s: firmware status cmd status:%d fw status:%02x\n", - __func__, ret, val); - if (ret) - goto error; - - if (val == 0x0c || val == 0x04) /* success or fail */ - break; - } - - if (val == 0x04) { - err("firmware did not run"); - ret = -1; - } else if (val != 0x0c) { - err("firmware boot timeout"); - ret = -1; - } - -error: -exit: - return ret; -} - -/* hash (and dump) eeprom */ -static int af9015_eeprom_hash(struct usb_device *udev) -{ - static const unsigned int eeprom_size = 256; - unsigned int reg; - int ret; - u8 val, *eeprom; - struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - - eeprom = kmalloc(eeprom_size, GFP_KERNEL); - if (eeprom == NULL) - return -ENOMEM; - - for (reg = 0; reg < eeprom_size; reg++) { - req.addr = reg; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto free; - eeprom[reg] = val; - } - - if (dvb_usb_af9015_debug & 0x01) - print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom, - eeprom_size); - - BUG_ON(eeprom_size % 4); - - af9015_config.eeprom_sum = 0; - for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) { - af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32; - af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]); - } - - deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum); - - ret = 0; -free: - kfree(eeprom); - return ret; -} - -static int af9015_init(struct dvb_usb_device *d) -{ - int ret; - deb_info("%s:\n", __func__); - - /* init RC canary */ - ret = af9015_write_reg(d, 0x98e9, 0xff); - if (ret) - goto error; - - ret = af9015_init_endpoint(d); - if (ret) - goto error; - -error: - return ret; -} - -static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) -{ - int ret; - deb_info("%s: onoff:%d\n", __func__, onoff); - - if (onoff) - ret = af9015_set_reg_bit(adap->dev, 0xd503, 0); - else - ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0); - - return ret; -} - -static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, - int onoff) -{ - int ret; - u8 idx; - - deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", - __func__, index, pid, onoff); - - ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff)); - if (ret) - goto error; - - ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8)); - if (ret) - goto error; - - idx = ((index & 0x1f) | (1 << 5)); - ret = af9015_write_reg(adap->dev, 0xd504, idx); - -error: - return ret; -} - -static int af9015_download_firmware(struct usb_device *udev, - const struct firmware *fw) -{ - int i, len, remaining, ret; - struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL}; - u16 checksum = 0; - - deb_info("%s:\n", __func__); - - /* calc checksum */ - for (i = 0; i < fw->size; i++) - checksum += fw->data[i]; - - af9015_config.firmware_size = fw->size; - af9015_config.firmware_checksum = checksum; - - #define FW_ADDR 0x5100 /* firmware start address */ - #define LEN_MAX 55 /* max packet size */ - for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { - len = remaining; - if (len > LEN_MAX) - len = LEN_MAX; - - req.data_len = len; - req.data = (u8 *) &fw->data[fw->size - remaining]; - req.addr = FW_ADDR + fw->size - remaining; - - ret = af9015_rw_udev(udev, &req); - if (ret) { - err("firmware download failed:%d", ret); - goto error; - } - } - - /* firmware loaded, request boot */ - req.cmd = BOOT; - ret = af9015_rw_udev(udev, &req); - if (ret) { - err("firmware boot failed:%d", ret); - goto error; - } - -error: - return ret; -} - -struct af9015_rc_setup { - unsigned int id; - char *rc_codes; -}; - -static char *af9015_rc_setup_match(unsigned int id, - const struct af9015_rc_setup *table) -{ - for (; table->rc_codes; table++) - if (table->id == id) - return table->rc_codes; - return NULL; -} - -static const struct af9015_rc_setup af9015_rc_setup_modparam[] = { - { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M }, - { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II }, - { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND }, - { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE }, - { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS }, - { } -}; - -static const struct af9015_rc_setup af9015_rc_setup_hashes[] = { - { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II }, - { 0xa3703d00, RC_MAP_ALINK_DTU_M }, - { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */ - { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */ - { } -}; - -static const struct af9015_rc_setup af9015_rc_setup_usbids[] = { - { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_RC, - RC_MAP_TERRATEC_SLIM_2 }, - { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC, - RC_MAP_TERRATEC_SLIM }, - { (USB_VID_VISIONPLUS << 16) | USB_PID_AZUREWAVE_AD_TU700, - RC_MAP_AZUREWAVE_AD_TU700 }, - { (USB_VID_VISIONPLUS << 16) | USB_PID_TINYTWIN, - RC_MAP_AZUREWAVE_AD_TU700 }, - { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGI_VOX_MINI_III, - RC_MAP_MSI_DIGIVOX_III }, - { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGIVOX_DUO, - RC_MAP_MSI_DIGIVOX_III }, - { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV_DONGLE_GOLD, - RC_MAP_LEADTEK_Y04G0051 }, - { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV2000DS, - RC_MAP_LEADTEK_Y04G0051 }, - { (USB_VID_AVERMEDIA << 16) | USB_PID_AVERMEDIA_VOLAR_X, - RC_MAP_AVERMEDIA_M135A }, - { (USB_VID_AFATECH << 16) | USB_PID_TREKSTOR_DVBT, - RC_MAP_TREKSTOR }, - { (USB_VID_KWORLD_2 << 16) | USB_PID_TINYTWIN_2, - RC_MAP_DIGITALNOW_TINYTWIN }, - { (USB_VID_GTEK << 16) | USB_PID_TINYTWIN_3, - RC_MAP_DIGITALNOW_TINYTWIN }, - { (USB_VID_KWORLD_2 << 16) | USB_PID_SVEON_STV22, - RC_MAP_MSI_DIGIVOX_III }, - { } -}; - -static void af9015_set_remote_config(struct usb_device *udev, - struct dvb_usb_device_properties *props) -{ - u16 vid = le16_to_cpu(udev->descriptor.idVendor); - u16 pid = le16_to_cpu(udev->descriptor.idProduct); - - /* try to load remote based module param */ - props->rc.core.rc_codes = af9015_rc_setup_match( - dvb_usb_af9015_remote, af9015_rc_setup_modparam); - - /* try to load remote based eeprom hash */ - if (!props->rc.core.rc_codes) - props->rc.core.rc_codes = af9015_rc_setup_match( - af9015_config.eeprom_sum, af9015_rc_setup_hashes); - - /* try to load remote based USB ID */ - if (!props->rc.core.rc_codes) - props->rc.core.rc_codes = af9015_rc_setup_match( - (vid << 16) | pid, af9015_rc_setup_usbids); - - /* try to load remote based USB iManufacturer string */ - if (!props->rc.core.rc_codes && vid == USB_VID_AFATECH) { - /* Check USB manufacturer and product strings and try - to determine correct remote in case of chip vendor - reference IDs are used. - DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */ - char manufacturer[10]; - memset(manufacturer, 0, sizeof(manufacturer)); - usb_string(udev, udev->descriptor.iManufacturer, - manufacturer, sizeof(manufacturer)); - if (!strcmp("MSI", manufacturer)) { - /* iManufacturer 1 MSI - iProduct 2 MSI K-VOX */ - props->rc.core.rc_codes = af9015_rc_setup_match( - AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, - af9015_rc_setup_modparam); - } - } - - /* finally load "empty" just for leaving IR receiver enabled */ - if (!props->rc.core.rc_codes) - props->rc.core.rc_codes = RC_MAP_EMPTY; - - return; -} - -static int af9015_read_config(struct usb_device *udev) -{ - int ret; - u8 val, i, offset = 0; - struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val}; - - /* IR remote controller */ - req.addr = AF9015_EEPROM_IR_MODE; - /* first message will timeout often due to possible hw bug */ - for (i = 0; i < 4; i++) { - ret = af9015_rw_udev(udev, &req); - if (!ret) - break; - } if (ret) goto error; - ret = af9015_eeprom_hash(udev); - if (ret) - goto error; + state->dual_mode = val; + deb_info("%s: TS mode=%d\n", __func__, state->dual_mode); - deb_info("%s: IR mode=%d\n", __func__, val); - for (i = 0; i < af9015_properties_count; i++) { - if (val == AF9015_IR_MODE_DISABLED) - af9015_properties[i].rc.core.rc_codes = NULL; - else - af9015_set_remote_config(udev, &af9015_properties[i]); - } + /* disable 2nd adapter because we don't have PID-filters */ + if (d->udev->speed == USB_SPEED_FULL) + state->dual_mode = 0; - /* TS mode - one or two receivers */ - req.addr = AF9015_EEPROM_TS_MODE; - ret = af9015_rw_udev(udev, &req); - if (ret) - goto error; - af9015_config.dual_mode = val; - deb_info("%s: TS mode=%d\n", __func__, af9015_config.dual_mode); - - /* Set adapter0 buffer size according to USB port speed, adapter1 buffer - size can be static because it is enabled only USB2.0 */ - for (i = 0; i < af9015_properties_count; i++) { - /* USB1.1 set smaller buffersize and disable 2nd adapter */ - if (udev->speed == USB_SPEED_FULL) { - af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize - = TS_USB11_FRAME_SIZE; - /* disable 2nd adapter because we don't have - PID-filters */ - af9015_config.dual_mode = 0; - } else { - af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize - = TS_USB20_FRAME_SIZE; - } - } - - if (af9015_config.dual_mode) { + if (state->dual_mode) { /* read 2nd demodulator I2C address */ req.addr = AF9015_EEPROM_DEMOD2_I2C; - ret = af9015_rw_udev(udev, &req); + ret = af9015_ctrl_msg(d, &req); if (ret) goto error; - af9015_af9013_config[1].i2c_addr = val; - - /* enable 2nd adapter */ - for (i = 0; i < af9015_properties_count; i++) - af9015_properties[i].num_adapters = 2; - } else { - /* disable 2nd adapter */ - for (i = 0; i < af9015_properties_count; i++) - af9015_properties[i].num_adapters = 1; + state->af9013_config[1].i2c_addr = val; } - for (i = 0; i < af9015_properties[0].num_adapters; i++) { + for (i = 0; i < state->dual_mode + 1; i++) { if (i == 1) offset = AF9015_EEPROM_OFFSET; /* xtal */ req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset; - ret = af9015_rw_udev(udev, &req); + ret = af9015_ctrl_msg(d, &req); if (ret) goto error; switch (val) { case 0: - af9015_af9013_config[i].clock = 28800000; + state->af9013_config[i].clock = 28800000; break; case 1: - af9015_af9013_config[i].clock = 20480000; + state->af9013_config[i].clock = 20480000; break; case 2: - af9015_af9013_config[i].clock = 28000000; + state->af9013_config[i].clock = 28000000; break; case 3: - af9015_af9013_config[i].clock = 25000000; + state->af9013_config[i].clock = 25000000; break; }; deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i, - val, af9015_af9013_config[i].clock); + val, state->af9013_config[i].clock); /* IF frequency */ req.addr = AF9015_EEPROM_IF1H + offset; - ret = af9015_rw_udev(udev, &req); + ret = af9015_ctrl_msg(d, &req); if (ret) goto error; - af9015_af9013_config[i].if_frequency = val << 8; + state->af9013_config[i].if_frequency = val << 8; req.addr = AF9015_EEPROM_IF1L + offset; - ret = af9015_rw_udev(udev, &req); + ret = af9015_ctrl_msg(d, &req); if (ret) goto error; - af9015_af9013_config[i].if_frequency += val; - af9015_af9013_config[i].if_frequency *= 1000; + state->af9013_config[i].if_frequency += val; + state->af9013_config[i].if_frequency *= 1000; deb_info("%s: [%d] IF frequency=%d\n", __func__, i, - af9015_af9013_config[0].if_frequency); + state->af9013_config[i].if_frequency); /* MT2060 IF1 */ req.addr = AF9015_EEPROM_MT2060_IF1H + offset; - ret = af9015_rw_udev(udev, &req); + ret = af9015_ctrl_msg(d, &req); if (ret) goto error; - af9015_config.mt2060_if1[i] = val << 8; + state->mt2060_if1[i] = val << 8; req.addr = AF9015_EEPROM_MT2060_IF1L + offset; - ret = af9015_rw_udev(udev, &req); + ret = af9015_ctrl_msg(d, &req); if (ret) goto error; - af9015_config.mt2060_if1[i] += val; + state->mt2060_if1[i] += val; deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i, - af9015_config.mt2060_if1[i]); + state->mt2060_if1[i]); /* tuner */ req.addr = AF9015_EEPROM_TUNER_ID1 + offset; - ret = af9015_rw_udev(udev, &req); + ret = af9015_ctrl_msg(d, &req); if (ret) goto error; switch (val) { @@ -958,24 +555,24 @@ static int af9015_read_config(struct usb_device *udev) case AF9013_TUNER_TDA18271: case AF9013_TUNER_QT1010A: case AF9013_TUNER_TDA18218: - af9015_af9013_config[i].spec_inv = 1; + state->af9013_config[i].spec_inv = 1; break; case AF9013_TUNER_MXL5003D: case AF9013_TUNER_MXL5005D: case AF9013_TUNER_MXL5005R: case AF9013_TUNER_MXL5007T: - af9015_af9013_config[i].spec_inv = 0; + state->af9013_config[i].spec_inv = 0; break; case AF9013_TUNER_MC44S803: - af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO; - af9015_af9013_config[i].spec_inv = 1; + state->af9013_config[i].gpio[1] = AF9013_GPIO_LO; + state->af9013_config[i].spec_inv = 1; break; default: warn("tuner id=%d not supported, please report!", val); return -ENODEV; }; - af9015_af9013_config[i].tuner = val; + state->af9013_config[i].tuner = val; deb_info("%s: [%d] tuner id=%d\n", __func__, i, val); } @@ -986,112 +583,52 @@ error: /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM content :-( Override some wrong values here. Ditto for the AVerTV Red HD+ (A850T) device. */ - if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_AVERMEDIA && - ((le16_to_cpu(udev->descriptor.idProduct) == + if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA && + ((le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_A850) || - (le16_to_cpu(udev->descriptor.idProduct) == + (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_A850T))) { deb_info("%s: AverMedia A850: overriding config\n", __func__); /* disable dual mode */ - af9015_config.dual_mode = 0; - /* disable 2nd adapter */ - for (i = 0; i < af9015_properties_count; i++) - af9015_properties[i].num_adapters = 1; + state->dual_mode = 0; /* set correct IF */ - af9015_af9013_config[0].if_frequency = 4570000; + state->af9013_config[0].if_frequency = 4570000; } return ret; } -static int af9015_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) +static int af9015_get_usb_stream_config(struct dvb_frontend *fe, + struct usb_data_stream_properties *stream) { - int ret; - u8 reply; - struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply}; - - ret = af9015_rw_udev(udev, &req); - if (ret) - return ret; - - deb_info("%s: reply:%02x\n", __func__, reply); - if (reply == 0x02) - *cold = 0; - else - *cold = 1; - - return ret; -} + struct dvb_usb_adapter *adap; -static int af9015_rc_query(struct dvb_usb_device *d) -{ - struct af9015_state *priv = d->priv; - int ret; - u8 buf[17]; + deb_info("%s: fe=%p\n", __func__, fe); - /* read registers needed to detect remote controller code */ - ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf)); - if (ret) - goto error; + stream->type = USB_BULK; + stream->count = 8; + stream->endpoint = 0x84; + stream->u.bulk.buffersize = TS_USB20_FRAME_SIZE; - /* If any of these are non-zero, assume invalid data */ - if (buf[1] || buf[2] || buf[3]) - return ret; + if (fe == NULL) + return 0; - /* Check for repeat of previous code */ - if ((priv->rc_repeat != buf[6] || buf[0]) && - !memcmp(&buf[12], priv->rc_last, 4)) { - deb_rc("%s: key repeated\n", __func__); - rc_keydown(d->rc_dev, priv->rc_keycode, 0); - priv->rc_repeat = buf[6]; - return ret; - } + adap = fe->dvb->priv; - /* Only process key if canary killed */ - if (buf[16] != 0xff && buf[0] != 0x01) { - deb_rc("%s: key pressed %02x %02x %02x %02x\n", __func__, - buf[12], buf[13], buf[14], buf[15]); + if (adap->id == 1) + stream->endpoint = 0x85; - /* Reset the canary */ - ret = af9015_write_reg(d, 0x98e9, 0xff); - if (ret) - goto error; + if (adap->dev->udev->speed == USB_SPEED_FULL) + stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE; - /* Remember this key */ - memcpy(priv->rc_last, &buf[12], 4); - if (buf[14] == (u8) ~buf[15]) { - if (buf[12] == (u8) ~buf[13]) { - /* NEC */ - priv->rc_keycode = buf[12] << 8 | buf[14]; - } else { - /* NEC extended*/ - priv->rc_keycode = buf[12] << 16 | - buf[13] << 8 | buf[14]; - } - } else { - /* 32 bit NEC */ - priv->rc_keycode = buf[12] << 24 | buf[13] << 16 | - buf[14] << 8 | buf[15]; - } - rc_keydown(d->rc_dev, priv->rc_keycode, 0); - } else { - deb_rc("%s: no key press\n", __func__); - /* Invalidate last keypress */ - /* Not really needed, but helps with debug */ - priv->rc_last[2] = priv->rc_last[3]; - } - - priv->rc_repeat = buf[6]; - -error: - if (ret) - err("%s: failed:%d", __func__, ret); + return 0; +} - return ret; +static int af9015_get_adapter_count(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + return state->dual_mode + 1; } /* override demod callbacks for resource locking */ @@ -1099,14 +636,14 @@ static int af9015_af9013_set_frontend(struct dvb_frontend *fe) { int ret; struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; + struct af9015_state *state = adap->dev->priv; - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + if (mutex_lock_interruptible(&state->fe_mutex)) return -EAGAIN; - ret = priv->set_frontend[adap->id](fe); + ret = state->set_frontend[adap->id](fe); - mutex_unlock(&adap->dev->usb_mutex); + mutex_unlock(&state->fe_mutex); return ret; } @@ -1117,14 +654,14 @@ static int af9015_af9013_read_status(struct dvb_frontend *fe, { int ret; struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; + struct af9015_state *state = adap->dev->priv; - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + if (mutex_lock_interruptible(&state->fe_mutex)) return -EAGAIN; - ret = priv->read_status[adap->id](fe, status); + ret = state->read_status[adap->id](fe, status); - mutex_unlock(&adap->dev->usb_mutex); + mutex_unlock(&state->fe_mutex); return ret; } @@ -1134,14 +671,14 @@ static int af9015_af9013_init(struct dvb_frontend *fe) { int ret; struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; + struct af9015_state *state = adap->dev->priv; - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + if (mutex_lock_interruptible(&state->fe_mutex)) return -EAGAIN; - ret = priv->init[adap->id](fe); + ret = state->init[adap->id](fe); - mutex_unlock(&adap->dev->usb_mutex); + mutex_unlock(&state->fe_mutex); return ret; } @@ -1151,14 +688,14 @@ static int af9015_af9013_sleep(struct dvb_frontend *fe) { int ret; struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; + struct af9015_state *state = adap->dev->priv; - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + if (mutex_lock_interruptible(&state->fe_mutex)) return -EAGAIN; - ret = priv->sleep[adap->id](fe); + ret = state->sleep[adap->id](fe); - mutex_unlock(&adap->dev->usb_mutex); + mutex_unlock(&state->fe_mutex); return ret; } @@ -1168,14 +705,14 @@ static int af9015_tuner_init(struct dvb_frontend *fe) { int ret; struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; + struct af9015_state *state = adap->dev->priv; - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + if (mutex_lock_interruptible(&state->fe_mutex)) return -EAGAIN; - ret = priv->tuner_init[adap->id](fe); + ret = state->tuner_init[adap->id](fe); - mutex_unlock(&adap->dev->usb_mutex); + mutex_unlock(&state->fe_mutex); return ret; } @@ -1185,32 +722,122 @@ static int af9015_tuner_sleep(struct dvb_frontend *fe) { int ret; struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; + struct af9015_state *state = adap->dev->priv; - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + if (mutex_lock_interruptible(&state->fe_mutex)) return -EAGAIN; - ret = priv->tuner_sleep[adap->id](fe); + ret = state->tuner_sleep[adap->id](fe); + + mutex_unlock(&state->fe_mutex); + + return ret; +} + +static int af9015_copy_firmware(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + int ret; + u8 fw_params[4]; + u8 val, i; + struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, sizeof(fw_params), + fw_params }; + deb_info("%s:\n", __func__); + + fw_params[0] = state->firmware_size >> 8; + fw_params[1] = state->firmware_size & 0xff; + fw_params[2] = state->firmware_checksum >> 8; + fw_params[3] = state->firmware_checksum & 0xff; + + /* wait 2nd demodulator ready */ + msleep(100); + + ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0x98be, &val); + if (ret) + goto error; + else + deb_info("%s: firmware status:%02x\n", __func__, val); + + if (val == 0x0c) /* fw is running, no need for download */ + goto exit; + + /* set I2C master clock to fast (to speed up firmware copy) */ + ret = af9015_write_reg(d, 0xd416, 0x04); /* 0x04 * 400ns */ + if (ret) + goto error; + + msleep(50); + + /* copy firmware */ + ret = af9015_ctrl_msg(d, &req); + if (ret) + err("firmware copy cmd failed:%d", ret); + deb_info("%s: firmware copy done\n", __func__); + + /* set I2C master clock back to normal */ + ret = af9015_write_reg(d, 0xd416, 0x14); /* 0x14 * 400ns */ + if (ret) + goto error; + + /* request boot firmware */ + ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0xe205, 1); + deb_info("%s: firmware boot cmd status:%d\n", __func__, ret); + if (ret) + goto error; + + for (i = 0; i < 15; i++) { + msleep(100); - mutex_unlock(&adap->dev->usb_mutex); + /* check firmware status */ + ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr, + 0x98be, &val); + deb_info("%s: firmware status cmd status:%d fw status:%02x\n", + __func__, ret, val); + if (ret) + goto error; + if (val == 0x0c || val == 0x04) /* success or fail */ + break; + } + + if (val == 0x04) { + err("firmware did not run"); + ret = -1; + } else if (val != 0x0c) { + err("firmware boot timeout"); + ret = -1; + } + +error: +exit: return ret; } - static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) { int ret; struct af9015_state *state = adap->dev->priv; - if (adap->id == 1) { + if (adap->id == 0) { + state->af9013_config[0].ts_mode = AF9013_TS_USB; + memcpy(state->af9013_config[0].api_version, "\x0\x1\x9\x0", 4); + state->af9013_config[0].gpio[0] = AF9013_GPIO_HI; + state->af9013_config[0].gpio[3] = AF9013_GPIO_TUNER_ON; + } else if (adap->id == 1) { + state->af9013_config[1].ts_mode = AF9013_TS_SERIAL; + memcpy(state->af9013_config[1].api_version, "\x0\x1\x9\x0", 4); + state->af9013_config[1].gpio[0] = AF9013_GPIO_TUNER_ON; + state->af9013_config[1].gpio[1] = AF9013_GPIO_LO; + /* copy firmware to 2nd demodulator */ - if (af9015_config.dual_mode) { + if (state->dual_mode) { ret = af9015_copy_firmware(adap->dev); if (ret) { err("firmware copy to 2nd frontend " \ "failed, will disable it"); - af9015_config.dual_mode = 0; + state->dual_mode = 0; return -ENODEV; } } else { @@ -1219,8 +846,8 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) } /* attach demodulator */ - adap->fe_adap[0].fe = dvb_attach(af9013_attach, - &af9015_af9013_config[adap->id], &adap->dev->i2c_adap); + adap->fe[0] = dvb_attach(af9013_attach, + &state->af9013_config[adap->id], &adap->dev->i2c_adap); /* * AF9015 firmware does not like if it gets interrupted by I2C adapter @@ -1228,27 +855,26 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) * is used only 2nd demodulator and tuner on dual tuner devices. * Override demodulator callbacks and use mutex for limit access to * those "critical" paths to keep AF9015 happy. - * Note: we abuse unused usb_mutex here. */ - if (adap->fe_adap[0].fe) { + if (adap->fe[0]) { state->set_frontend[adap->id] = - adap->fe_adap[0].fe->ops.set_frontend; - adap->fe_adap[0].fe->ops.set_frontend = + adap->fe[0]->ops.set_frontend; + adap->fe[0]->ops.set_frontend = af9015_af9013_set_frontend; state->read_status[adap->id] = - adap->fe_adap[0].fe->ops.read_status; - adap->fe_adap[0].fe->ops.read_status = + adap->fe[0]->ops.read_status; + adap->fe[0]->ops.read_status = af9015_af9013_read_status; - state->init[adap->id] = adap->fe_adap[0].fe->ops.init; - adap->fe_adap[0].fe->ops.init = af9015_af9013_init; + state->init[adap->id] = adap->fe[0]->ops.init; + adap->fe[0]->ops.init = af9015_af9013_init; - state->sleep[adap->id] = adap->fe_adap[0].fe->ops.sleep; - adap->fe_adap[0].fe->ops.sleep = af9015_af9013_sleep; + state->sleep[adap->id] = adap->fe[0]->ops.sleep; + adap->fe[0]->ops.sleep = af9015_af9013_sleep; } - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; + return adap->fe[0] == NULL ? -ENODEV : 0; } static struct mt2060_config af9015_mt2060_config = { @@ -1316,57 +942,57 @@ static struct mxl5007t_config af9015_mxl5007t_config = { static int af9015_tuner_attach(struct dvb_usb_adapter *adap) { - int ret; struct af9015_state *state = adap->dev->priv; + int ret; deb_info("%s:\n", __func__); - switch (af9015_af9013_config[adap->id].tuner) { + switch (state->af9013_config[adap->id].tuner) { case AF9013_TUNER_MT2060: case AF9013_TUNER_MT2060_2: - ret = dvb_attach(mt2060_attach, adap->fe_adap[0].fe, + ret = dvb_attach(mt2060_attach, adap->fe[0], &adap->dev->i2c_adap, &af9015_mt2060_config, - af9015_config.mt2060_if1[adap->id]) + state->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_QT1010: case AF9013_TUNER_QT1010A: - ret = dvb_attach(qt1010_attach, adap->fe_adap[0].fe, + ret = dvb_attach(qt1010_attach, adap->fe[0], &adap->dev->i2c_adap, &af9015_qt1010_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_TDA18271: - ret = dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0xc0, + ret = dvb_attach(tda18271_attach, adap->fe[0], 0xc0, &adap->dev->i2c_adap, &af9015_tda18271_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_TDA18218: - ret = dvb_attach(tda18218_attach, adap->fe_adap[0].fe, + ret = dvb_attach(tda18218_attach, adap->fe[0], &adap->dev->i2c_adap, &af9015_tda18218_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MXL5003D: - ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + ret = dvb_attach(mxl5005s_attach, adap->fe[0], &adap->dev->i2c_adap, &af9015_mxl5003_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MXL5005D: case AF9013_TUNER_MXL5005R: - ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe, + ret = dvb_attach(mxl5005s_attach, adap->fe[0], &adap->dev->i2c_adap, &af9015_mxl5005_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_ENV77H11D5: - ret = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0xc0, + ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0xc0, &adap->dev->i2c_adap, DVB_PLL_TDA665X) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MC44S803: - ret = dvb_attach(mc44s803_attach, adap->fe_adap[0].fe, + ret = dvb_attach(mc44s803_attach, adap->fe[0], &adap->dev->i2c_adap, &af9015_mc44s803_config) == NULL ? -ENODEV : 0; break; case AF9013_TUNER_MXL5007T: - ret = dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe, + ret = dvb_attach(mxl5007t_attach, adap->fe[0], &adap->dev->i2c_adap, 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0; break; @@ -1374,575 +1000,437 @@ static int af9015_tuner_attach(struct dvb_usb_adapter *adap) default: ret = -ENODEV; err("Unknown tuner id:%d", - af9015_af9013_config[adap->id].tuner); + state->af9013_config[adap->id].tuner); } - if (adap->fe_adap[0].fe->ops.tuner_ops.init) { + if (adap->fe[0]->ops.tuner_ops.init) { state->tuner_init[adap->id] = - adap->fe_adap[0].fe->ops.tuner_ops.init; - adap->fe_adap[0].fe->ops.tuner_ops.init = af9015_tuner_init; + adap->fe[0]->ops.tuner_ops.init; + adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init; } - if (adap->fe_adap[0].fe->ops.tuner_ops.sleep) { + if (adap->fe[0]->ops.tuner_ops.sleep) { state->tuner_sleep[adap->id] = - adap->fe_adap[0].fe->ops.tuner_ops.sleep; - adap->fe_adap[0].fe->ops.tuner_ops.sleep = af9015_tuner_sleep; + adap->fe[0]->ops.tuner_ops.sleep; + adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep; + } + + return ret; +} + +static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) +{ + int ret; + deb_info("%s: onoff:%d\n", __func__, onoff); + + if (onoff) + ret = af9015_set_reg_bit(adap->dev, 0xd503, 0); + else + ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0); + + return ret; +} + +static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, + int onoff) +{ + int ret; + u8 idx; + + deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n", + __func__, index, pid, onoff); + + ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff)); + if (ret) + goto error; + + ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8)); + if (ret) + goto error; + + idx = ((index & 0x1f) | (1 << 5)); + ret = af9015_write_reg(adap->dev, 0xd504, idx); + +error: + return ret; +} + +static int af9015_init_endpoint(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + int ret; + u16 frame_size; + u8 packet_size; + deb_info("%s: USB speed:%d\n", __func__, d->udev->speed); + + if (d->udev->speed == USB_SPEED_FULL) { + frame_size = TS_USB11_FRAME_SIZE/4; + packet_size = TS_USB11_MAX_PACKET_SIZE/4; + } else { + frame_size = TS_USB20_FRAME_SIZE/4; + packet_size = TS_USB20_MAX_PACKET_SIZE/4; + } + + ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */ + if (ret) + goto error; + ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */ + if (ret) + goto error; + } + ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */ + if (ret) + goto error; + } + /* EP4 xfer length */ + ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd89, frame_size >> 8); + if (ret) + goto error; + /* EP5 xfer length */ + ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8); + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */ + if (ret) + goto error; + ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */ + if (ret) + goto error; + ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */ + if (ret) + goto error; + if (state->dual_mode) { + ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */ + if (ret) + goto error; } + /* enable / disable mp2if2 */ + if (state->dual_mode) + ret = af9015_set_reg_bit(d, 0xd50b, 0); + else + ret = af9015_clear_reg_bit(d, 0xd50b, 0); + +error: + if (ret) + err("endpoint init failed:%d", ret); + return ret; +} + +static int af9015_init(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + int ret; + deb_info("%s:\n", __func__); + + mutex_init(&state->fe_mutex); + + /* init RC canary */ + ret = af9015_write_reg(d, 0x98e9, 0xff); + if (ret) + goto error; + + ret = af9015_init_endpoint(d); + if (ret) + goto error; + +error: return ret; } -enum af9015_usb_table_entry { - AFATECH_9015, - AFATECH_9016, - WINFAST_DTV_GOLD, - PINNACLE_PCTV_71E, - KWORLD_PLUSTV_399U, - TINYTWIN, - AZUREWAVE_TU700, - TERRATEC_AF9015, - KWORLD_PLUSTV_PC160, - AVERTV_VOLAR_X, - XTENSIONS_380U, - MSI_DIGIVOX_DUO, - AVERTV_VOLAR_X_REV2, - TELESTAR_STARSTICK_2, - AVERMEDIA_A309_USB, - MSI_DIGIVOX_MINI_III, - KWORLD_E396, - KWORLD_E39B, - KWORLD_E395, - TREKSTOR_DVBT, - AVERTV_A850, - AVERTV_A805, - CONCEPTRONIC_CTVDIGRCU, - KWORLD_MC810, - GENIUS_TVGO_DVB_T03, - KWORLD_399U_2, - KWORLD_PC160_T, - SVEON_STV20, - TINYTWIN_2, - WINFAST_DTV2000DS, - KWORLD_UB383_T, - KWORLD_E39A, - AVERMEDIA_A815M, - CINERGY_T_STICK_RC, - CINERGY_T_DUAL_RC, - AVERTV_A850T, - TINYTWIN_3, - SVEON_STV22, +struct af9015_rc_setup { + unsigned int id; + char *rc_codes; }; -static struct usb_device_id af9015_usb_table[] = { - [AFATECH_9015] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)}, - [AFATECH_9016] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)}, - [WINFAST_DTV_GOLD] = { - USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)}, - [PINNACLE_PCTV_71E] = { - USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)}, - [KWORLD_PLUSTV_399U] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)}, - [TINYTWIN] = { - USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN)}, - [AZUREWAVE_TU700] = { - USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700)}, - [TERRATEC_AF9015] = { - USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)}, - [KWORLD_PLUSTV_PC160] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)}, - [AVERTV_VOLAR_X] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)}, - [XTENSIONS_380U] = { - USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)}, - [MSI_DIGIVOX_DUO] = { - USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)}, - [AVERTV_VOLAR_X_REV2] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)}, - [TELESTAR_STARSTICK_2] = { - USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)}, - [AVERMEDIA_A309_USB] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)}, - [MSI_DIGIVOX_MINI_III] = { - USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)}, - [KWORLD_E396] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U)}, - [KWORLD_E39B] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2)}, - [KWORLD_E395] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3)}, - [TREKSTOR_DVBT] = { - USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT)}, - [AVERTV_A850] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850)}, - [AVERTV_A805] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)}, - [CONCEPTRONIC_CTVDIGRCU] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU)}, - [KWORLD_MC810] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810)}, - [GENIUS_TVGO_DVB_T03] = { - USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03)}, - [KWORLD_399U_2] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)}, - [KWORLD_PC160_T] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)}, - [SVEON_STV20] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)}, - [TINYTWIN_2] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)}, - [WINFAST_DTV2000DS] = { - USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)}, - [KWORLD_UB383_T] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T)}, - [KWORLD_E39A] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)}, - [AVERMEDIA_A815M] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M)}, - [CINERGY_T_STICK_RC] = { - USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_T_STICK_RC)}, - [CINERGY_T_DUAL_RC] = { - USB_DEVICE(USB_VID_TERRATEC, - USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)}, - [AVERTV_A850T] = { - USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)}, - [TINYTWIN_3] = { - USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3)}, - [SVEON_STV22] = { - USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22)}, +static char *af9015_rc_setup_match(unsigned int id, + const struct af9015_rc_setup *table) +{ + for (; table->rc_codes; table++) + if (table->id == id) + return table->rc_codes; + return NULL; +} + +static const struct af9015_rc_setup af9015_rc_setup_modparam[] = { + { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M }, + { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II }, + { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND }, + { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE }, + { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS }, { } }; -MODULE_DEVICE_TABLE(usb, af9015_usb_table); - -#define AF9015_RC_INTERVAL 500 -static struct dvb_usb_device_properties af9015_properties[] = { - { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9015_download_firmware, - .firmware = "dvb-usb-af9015.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct af9015_state), - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 32, - .pid_filter = af9015_pid_filter, - .pid_filter_ctrl = af9015_pid_filter_ctrl, - - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - }, - } - }, - }, - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x85, - .u = { - .bulk = { - .buffersize = TS_USB20_FRAME_SIZE, - } - } - }, - } - }, - } - }, - .identify_state = af9015_identify_state, +static const struct af9015_rc_setup af9015_rc_setup_hashes[] = { + { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II }, + { 0xa3703d00, RC_MAP_ALINK_DTU_M }, + { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */ + { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */ + { } +}; - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "af9015", - .rc_query = af9015_rc_query, - .rc_interval = AF9015_RC_INTERVAL, - .allowed_protos = RC_TYPE_NEC, - }, +static int af9015_rc_query(struct dvb_usb_device *d) +{ + struct af9015_state *state = d->priv; + int ret; + u8 buf[17]; - .i2c_algo = &af9015_i2c_algo, - - .num_device_descs = 12, /* check max from dvb-usb.h */ - .devices = { - { - .name = "Afatech AF9015 DVB-T USB2.0 stick", - .cold_ids = { - &af9015_usb_table[AFATECH_9015], - &af9015_usb_table[AFATECH_9016], - }, - }, { - .name = "Leadtek WinFast DTV Dongle Gold", - .cold_ids = { - &af9015_usb_table[WINFAST_DTV_GOLD], - }, - }, { - .name = "Pinnacle PCTV 71e", - .cold_ids = { - &af9015_usb_table[PINNACLE_PCTV_71E], - }, - }, { - .name = "KWorld PlusTV Dual DVB-T Stick " \ - "(DVB-T 399U)", - .cold_ids = { - &af9015_usb_table[KWORLD_PLUSTV_399U], - &af9015_usb_table[KWORLD_399U_2], - }, - }, { - .name = "DigitalNow TinyTwin DVB-T Receiver", - .cold_ids = { - &af9015_usb_table[TINYTWIN], - &af9015_usb_table[TINYTWIN_2], - &af9015_usb_table[TINYTWIN_3], - }, - }, { - .name = "TwinHan AzureWave AD-TU700(704J)", - .cold_ids = { - &af9015_usb_table[AZUREWAVE_TU700], - }, - }, { - .name = "TerraTec Cinergy T USB XE", - .cold_ids = { - &af9015_usb_table[TERRATEC_AF9015], - }, - }, { - .name = "KWorld PlusTV Dual DVB-T PCI " \ - "(DVB-T PC160-2T)", - .cold_ids = { - &af9015_usb_table[KWORLD_PLUSTV_PC160], - }, - }, { - .name = "AVerMedia AVerTV DVB-T Volar X", - .cold_ids = { - &af9015_usb_table[AVERTV_VOLAR_X], - }, - }, { - .name = "TerraTec Cinergy T Stick RC", - .cold_ids = { - &af9015_usb_table[CINERGY_T_STICK_RC], - }, - }, { - .name = "TerraTec Cinergy T Stick Dual RC", - .cold_ids = { - &af9015_usb_table[CINERGY_T_DUAL_RC], - }, - }, { - .name = "AverMedia AVerTV Red HD+ (A850T)", - .cold_ids = { - &af9015_usb_table[AVERTV_A850T], - }, - }, - } - }, { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9015_download_firmware, - .firmware = "dvb-usb-af9015.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct af9015_state), - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 32, - .pid_filter = af9015_pid_filter, - .pid_filter_ctrl = af9015_pid_filter_ctrl, - - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - }, - } - }, - }, - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x85, - .u = { - .bulk = { - .buffersize = TS_USB20_FRAME_SIZE, - } - } - }, - } - }, - } - }, + deb_info("%s:\n", __func__); - .identify_state = af9015_identify_state, + /* read registers needed to detect remote controller code */ + ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf)); + if (ret) + goto error; - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "af9015", - .rc_query = af9015_rc_query, - .rc_interval = AF9015_RC_INTERVAL, - .allowed_protos = RC_TYPE_NEC, - }, + /* If any of these are non-zero, assume invalid data */ + if (buf[1] || buf[2] || buf[3]) + return ret; - .i2c_algo = &af9015_i2c_algo, - - .num_device_descs = 10, /* check max from dvb-usb.h */ - .devices = { - { - .name = "Xtensions XD-380", - .cold_ids = { - &af9015_usb_table[XTENSIONS_380U], - }, - }, { - .name = "MSI DIGIVOX Duo", - .cold_ids = { - &af9015_usb_table[MSI_DIGIVOX_DUO], - }, - }, { - .name = "Fujitsu-Siemens Slim Mobile USB DVB-T", - .cold_ids = { - &af9015_usb_table[AVERTV_VOLAR_X_REV2], - }, - }, { - .name = "Telestar Starstick 2", - .cold_ids = { - &af9015_usb_table[TELESTAR_STARSTICK_2], - }, - }, { - .name = "AVerMedia A309", - .cold_ids = { - &af9015_usb_table[AVERMEDIA_A309_USB], - }, - }, { - .name = "MSI Digi VOX mini III", - .cold_ids = { - &af9015_usb_table[MSI_DIGIVOX_MINI_III], - }, - }, { - .name = "KWorld USB DVB-T TV Stick II " \ - "(VS-DVB-T 395U)", - .cold_ids = { - &af9015_usb_table[KWORLD_E396], - &af9015_usb_table[KWORLD_E39B], - &af9015_usb_table[KWORLD_E395], - &af9015_usb_table[KWORLD_E39A], - }, - }, { - .name = "TrekStor DVB-T USB Stick", - .cold_ids = { - &af9015_usb_table[TREKSTOR_DVBT], - }, - }, { - .name = "AverMedia AVerTV Volar Black HD " \ - "(A850)", - .cold_ids = { - &af9015_usb_table[AVERTV_A850], - }, - }, { - .name = "Sveon STV22 Dual USB DVB-T Tuner HDTV", - .cold_ids = { - &af9015_usb_table[SVEON_STV22], - }, - }, - } - }, { - .caps = DVB_USB_IS_AN_I2C_ADAPTER, - - .usb_ctrl = DEVICE_SPECIFIC, - .download_firmware = af9015_download_firmware, - .firmware = "dvb-usb-af9015.fw", - .no_reconnect = 1, - - .size_of_priv = sizeof(struct af9015_state), - - .num_adapters = 2, - .adapter = { - { - .num_frontends = 1, - .fe = { - { - .caps = DVB_USB_ADAP_HAS_PID_FILTER | - DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, - - .pid_filter_count = 32, - .pid_filter = af9015_pid_filter, - .pid_filter_ctrl = af9015_pid_filter_ctrl, - - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x84, - }, - } - }, - }, - { - .num_frontends = 1, - .fe = { - { - .frontend_attach = af9015_af9013_frontend_attach, - .tuner_attach = af9015_tuner_attach, - .stream = { - .type = USB_BULK, - .count = 6, - .endpoint = 0x85, - .u = { - .bulk = { - .buffersize = TS_USB20_FRAME_SIZE, - } - } - }, - } - }, - } - }, + /* Check for repeat of previous code */ + if ((state->rc_repeat != buf[6] || buf[0]) && + !memcmp(&buf[12], state->rc_last, 4)) { + deb_rc("%s: key repeated\n", __func__); + rc_keydown(d->rc_dev, state->rc_keycode, 0); + state->rc_repeat = buf[6]; + return ret; + } - .identify_state = af9015_identify_state, + /* Only process key if canary killed */ + if (buf[16] != 0xff && buf[0] != 0x01) { + deb_rc("%s: key pressed %02x %02x %02x %02x\n", __func__, + buf[12], buf[13], buf[14], buf[15]); - .rc.core = { - .protocol = RC_TYPE_NEC, - .module_name = "af9015", - .rc_query = af9015_rc_query, - .rc_interval = AF9015_RC_INTERVAL, - .allowed_protos = RC_TYPE_NEC, - }, + /* Reset the canary */ + ret = af9015_write_reg(d, 0x98e9, 0xff); + if (ret) + goto error; - .i2c_algo = &af9015_i2c_algo, - - .num_device_descs = 9, /* check max from dvb-usb.h */ - .devices = { - { - .name = "AverMedia AVerTV Volar GPS 805 (A805)", - .cold_ids = { - &af9015_usb_table[AVERTV_A805], - }, - }, { - .name = "Conceptronic USB2.0 DVB-T CTVDIGRCU " \ - "V3.0", - .cold_ids = { - &af9015_usb_table[CONCEPTRONIC_CTVDIGRCU], - }, - }, { - .name = "KWorld Digial MC-810", - .cold_ids = { - &af9015_usb_table[KWORLD_MC810], - }, - }, { - .name = "Genius TVGo DVB-T03", - .cold_ids = { - &af9015_usb_table[GENIUS_TVGO_DVB_T03], - }, - }, { - .name = "KWorld PlusTV DVB-T PCI Pro Card " \ - "(DVB-T PC160-T)", - .cold_ids = { - &af9015_usb_table[KWORLD_PC160_T], - }, - }, { - .name = "Sveon STV20 Tuner USB DVB-T HDTV", - .cold_ids = { - &af9015_usb_table[SVEON_STV20], - }, - }, { - .name = "Leadtek WinFast DTV2000DS", - .cold_ids = { - &af9015_usb_table[WINFAST_DTV2000DS], - }, - }, { - .name = "KWorld USB DVB-T Stick Mobile " \ - "(UB383-T)", - .cold_ids = { - &af9015_usb_table[KWORLD_UB383_T], - }, - }, { - .name = "AverMedia AVerTV Volar M (A815Mac)", - .cold_ids = { - &af9015_usb_table[AVERMEDIA_A815M], - }, - }, + /* Remember this key */ + memcpy(state->rc_last, &buf[12], 4); + if (buf[14] == (u8) ~buf[15]) { + if (buf[12] == (u8) ~buf[13]) { + /* NEC */ + state->rc_keycode = buf[12] << 8 | buf[14]; + } else { + /* NEC extended*/ + state->rc_keycode = buf[12] << 16 | + buf[13] << 8 | buf[14]; + } + } else { + /* 32 bit NEC */ + state->rc_keycode = buf[12] << 24 | buf[13] << 16 | + buf[14] << 8 | buf[15]; } - }, -}; + rc_keydown(d->rc_dev, state->rc_keycode, 0); + } else { + deb_rc("%s: no key press\n", __func__); + /* Invalidate last keypress */ + /* Not really needed, but helps with debug */ + state->rc_last[2] = state->rc_last[3]; + } + + state->rc_repeat = buf[6]; + +error: + if (ret) + err("%s: failed:%d", __func__, ret); + + return ret; +} -static int af9015_usb_probe(struct usb_interface *intf, - const struct usb_device_id *id) +static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) { - int ret = 0; - struct dvb_usb_device *d = NULL; - struct usb_device *udev = interface_to_usbdev(intf); - u8 i; - - deb_info("%s: interface:%d\n", __func__, - intf->cur_altsetting->desc.bInterfaceNumber); - - /* interface 0 is used by DVB-T receiver and - interface 1 is for remote controller (HID) */ - if (intf->cur_altsetting->desc.bInterfaceNumber == 0) { - ret = af9015_read_config(udev); - if (ret) - return ret; - - for (i = 0; i < af9015_properties_count; i++) { - ret = dvb_usb_device_init(intf, &af9015_properties[i], - THIS_MODULE, &d, adapter_nr); - if (!ret) - break; - if (ret != -ENODEV) - return ret; - } - if (ret) - return ret; + struct af9015_state *state = d->priv; + u16 vid = le16_to_cpu(d->udev->descriptor.idVendor); + + if (state->ir_mode == AF9015_IR_MODE_DISABLED) + return 0; + + /* try to load remote based module param */ + rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote, + af9015_rc_setup_modparam); - if (d) - ret = af9015_init(d); + /* try to load remote based eeprom hash */ + if (!rc->map_name) + rc->map_name = af9015_rc_setup_match(state->eeprom_sum, + af9015_rc_setup_hashes); + + /* try to load remote based USB iManufacturer string */ + if (!rc->map_name && vid == USB_VID_AFATECH) { + /* Check USB manufacturer and product strings and try + to determine correct remote in case of chip vendor + reference IDs are used. + DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */ + char manufacturer[10]; + memset(manufacturer, 0, sizeof(manufacturer)); + usb_string(d->udev, d->udev->descriptor.iManufacturer, + manufacturer, sizeof(manufacturer)); + if (!strcmp("MSI", manufacturer)) { + /* iManufacturer 1 MSI + iProduct 2 MSI K-VOX */ + rc->map_name = af9015_rc_setup_match( + AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, + af9015_rc_setup_modparam); + } } - return ret; + rc->allowed_protos = RC_TYPE_NEC; + rc->query = af9015_rc_query; + rc->interval = 500; + + return 0; } +/* interface 0 is used by DVB-T receiver and + interface 1 is for remote controller (HID) */ +static struct dvb_usb_device_properties af9015_props = { + .driver_name = KBUILD_MODNAME, + .owner = THIS_MODULE, + .adapter_nr = adapter_nr, + .size_of_priv = sizeof(struct af9015_state), + + .generic_bulk_ctrl_endpoint = 0x02, + .generic_bulk_ctrl_endpoint_response = 0x81, + + .identify_state = af9015_identify_state, + .firmware = "dvb-usb-af9015.fw", + .download_firmware = af9015_download_firmware, + + .read_config = af9015_read_config, + .i2c_algo = &af9015_i2c_algo, + .init = af9015_init, + .get_rc_config = af9015_get_rc_config, + .get_usb_stream_config = af9015_get_usb_stream_config, + + .get_adapter_count = af9015_get_adapter_count, + .adapter = { + { + .caps = DVB_USB_ADAP_HAS_PID_FILTER | + DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, + .pid_filter_count = 32, + .pid_filter = af9015_pid_filter, + .pid_filter_ctrl = af9015_pid_filter_ctrl, + .frontend_attach = af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + }, + { + .frontend_attach = af9015_af9013_frontend_attach, + .tuner_attach = af9015_tuner_attach, + } + }, +}; + +static const struct usb_device_id af9015_id_table[] = { + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015, + &af9015_props, "Afatech AF9015 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016, + &af9015_props, "Afatech AF9015 reference design", NULL) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD, + &af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) }, + { DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E, + &af9015_props, "Pinnacle PCTV 71e", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U, + &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN, + &af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) }, + { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700, + &af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2, + &af9015_props, "TerraTec Cinergy T USB XE", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T, + &af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X, + &af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) }, + { DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380, + &af9015_props, "Xtensions XD-380", NULL) }, + { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO, + &af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2, + &af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) }, + { DVB_USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2, + &af9015_props, "Telestar Starstick 2", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309, + &af9015_props, "AVerMedia A309", NULL) }, + { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III, + &af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT, + &af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850, + &af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805, + &af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU, + &af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810, + &af9015_props, "KWorld Digial MC-810", NULL) }, + { DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03, + &af9015_props, "Genius TVGo DVB-T03", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2, + &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T, + &af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20, + &af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2, + &af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) }, + { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS, + &af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T, + &af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4, + &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M, + &af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC, + &af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC, + &af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) }, + { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T, + &af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) }, + { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3, + &af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) }, + { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22, + &af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) }, + { } +}; +MODULE_DEVICE_TABLE(usb, af9015_id_table); + /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver af9015_usb_driver = { - .name = "dvb_usb_af9015", - .probe = af9015_usb_probe, - .disconnect = dvb_usb_device_exit, - .id_table = af9015_usb_table, + .name = KBUILD_MODNAME, + .probe = dvb_usbv2_probe, + .disconnect = dvb_usbv2_disconnect, + .id_table = af9015_id_table, + .no_dynamic_id = 1, }; module_usb_driver(af9015_usb_driver); diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index 2f68419e899b..b41ee73b26dc 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -21,18 +21,54 @@ * */ -#ifndef _DVB_USB_AF9015_H_ -#define _DVB_USB_AF9015_H_ +#ifndef AF9015_H +#define AF9015_H + +#include +#include "dvb_usb.h" +#include "af9013.h" +#include "dvb-pll.h" +#include "mt2060.h" +#include "qt1010.h" +#include "tda18271.h" +#include "mxl5005s.h" +#include "mc44s803.h" +#include "tda18218.h" +#include "mxl5007t.h" #define DVB_USB_LOG_PREFIX "af9015" -#include "dvb-usb.h" + +#ifdef CONFIG_DVB_USB_DEBUG +#define dprintk(var, level, args...) \ + do { if ((var & level)) printk(args); } while (0) +#define DVB_USB_DEBUG_STATUS +#else +#define dprintk(args...) +#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" +#endif #define deb_info(args...) dprintk(dvb_usb_af9015_debug, 0x01, args) #define deb_rc(args...) dprintk(dvb_usb_af9015_debug, 0x02, args) -#define deb_xfer(args...) dprintk(dvb_usb_af9015_debug, 0x04, args) -#define deb_reg(args...) dprintk(dvb_usb_af9015_debug, 0x08, args) -#define deb_i2c(args...) dprintk(dvb_usb_af9015_debug, 0x10, args) -#define deb_fw(args...) dprintk(dvb_usb_af9015_debug, 0x20, args) + +#undef err +#define err(format, arg...) \ + printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) \ + printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) + +/* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0. + We use smaller - about 1/4 from the original, 5 and 87. */ +#define TS_PACKET_SIZE 188 + +#define TS_USB20_PACKET_COUNT 87 +#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT) + +#define TS_USB11_PACKET_COUNT 5 +#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT) + +#define TS_USB20_MAX_PACKET_SIZE 512 +#define TS_USB11_MAX_PACKET_SIZE 64 #define AF9015_I2C_EEPROM 0xa0 #define AF9015_I2C_DEMOD 0x38 @@ -99,9 +135,17 @@ enum af9015_ir_mode { }; struct af9015_state { + u8 ir_mode; u8 rc_repeat; u32 rc_keycode; u8 rc_last[4]; + u8 dual_mode; + u8 seq; /* packet sequence number */ + u16 mt2060_if1[2]; + u16 firmware_size; + u16 firmware_checksum; + u32 eeprom_sum; + struct af9013_config af9013_config[2]; /* for demod callback override */ int (*set_frontend[2]) (struct dvb_frontend *fe); @@ -110,14 +154,7 @@ struct af9015_state { int (*sleep[2]) (struct dvb_frontend *fe); int (*tuner_init[2]) (struct dvb_frontend *fe); int (*tuner_sleep[2]) (struct dvb_frontend *fe); -}; - -struct af9015_config { - u8 dual_mode:1; - u16 mt2060_if1[2]; - u16 firmware_size; - u16 firmware_checksum; - u32 eeprom_sum; + struct mutex fe_mutex; }; enum af9015_remote {