From: Bhupesh Sharma Date: Fri, 23 Oct 2015 19:31:53 +0000 (+0530) Subject: Documentation/dts: Move FSL board-specific bindings out of /powerpc X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a2cce7a9f1b8cc3d4edce106fb971529f1d4d9ce;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Documentation/dts: Move FSL board-specific bindings out of /powerpc Since the same board components can be used across ARM and PPC board families, this patch moves the FSL board-specific bindings out of bindings/powerpci. While at it, this patch also adds the bindings for QIXIS FPGA controller found on FSL LS2080A boards. These boards have an on-board FPGA/CPLD connected to the IFC controller. Signed-off-by: Bhupesh Sharma Signed-off-by: Jaiprakash Singh Signed-off-by: Arnd Bergmann --- diff --git a/Documentation/devicetree/bindings/board/fsl-board.txt b/Documentation/devicetree/bindings/board/fsl-board.txt new file mode 100644 index 000000000000..fb7b03ec2071 --- /dev/null +++ b/Documentation/devicetree/bindings/board/fsl-board.txt @@ -0,0 +1,112 @@ +Freescale Reference Board Bindings + +This document describes device tree bindings for various devices that +exist on some Freescale reference boards. + +* Board Control and Status (BCSR) + +Required properties: + + - compatible : Should be "fsl,-bcsr" + - reg : Offset and length of the register set for the device + +Example: + + bcsr@f8000000 { + compatible = "fsl,mpc8360mds-bcsr"; + reg = ; + }; + +* Freescale on-board FPGA + +This is the memory-mapped registers for on board FPGA. + +Required properties: +- compatible: should be a board-specific string followed by a string + indicating the type of FPGA. Example: + "fsl,-fpga", "fsl,fpga-pixis", or + "fsl,-fpga", "fsl,fpga-qixis" +- reg: should contain the address and the length of the FPGA register set. + +Optional properties: +- interrupt-parent: should specify phandle for the interrupt controller. +- interrupts: should specify event (wakeup) IRQ. + +Example (P1022DS): + + board-control@3,0 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + interrupts = <8 8 0 0>; + }; + +Example (LS2080A-RDB): + + cpld@3,0 { + compatible = "fsl,ls2080ardb-fpga", "fsl,fpga-qixis"; + reg = <0x3 0 0x10000>; + }; + +* Freescale BCSR GPIO banks + +Some BCSR registers act as simple GPIO controllers, each such +register can be represented by the gpio-controller node. + +Required properities: +- compatible : Should be "fsl,-bcsr-gpio". +- reg : Should contain the address and the length of the GPIO bank + register. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). +- gpio-controller : Marks the port as GPIO controller. + +Example: + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr13: gpio-controller@d { + #gpio-cells = <2>; + compatible = "fsl,mpc8360mds-bcsr-gpio"; + reg = <0xd 1>; + gpio-controller; + }; + }; + +* Freescale on-board FPGA connected on I2C bus + +Some Freescale boards like BSC9132QDS have on board FPGA connected on +the i2c bus. + +Required properties: +- compatible: Should be a board-specific string followed by a string + indicating the type of FPGA. Example: + "fsl,-fpga", "fsl,fpga-qixis-i2c" +- reg: Should contain the address of the FPGA + +Example: + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; + +* Freescale on-board CPLD + +Some Freescale boards like T1040RDB have an on board CPLD connected. + +Required properties: +- compatible: Should be a board-specific string like "fsl,-cpld" + Example: + "fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld" +- reg: should describe CPLD registers + +Example: + cpld@3,0 { + compatible = "fsl,t1040rdb-cpld"; + reg = <3 0 0x300>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt deleted file mode 100644 index cff38bdbc0e4..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt +++ /dev/null @@ -1,102 +0,0 @@ -Freescale Reference Board Bindings - -This document describes device tree bindings for various devices that -exist on some Freescale reference boards. - -* Board Control and Status (BCSR) - -Required properties: - - - compatible : Should be "fsl,-bcsr" - - reg : Offset and length of the register set for the device - -Example: - - bcsr@f8000000 { - compatible = "fsl,mpc8360mds-bcsr"; - reg = ; - }; - -* Freescale on-board FPGA - -This is the memory-mapped registers for on board FPGA. - -Required properities: -- compatible: should be a board-specific string followed by a string - indicating the type of FPGA. Example: - "fsl,-fpga", "fsl,fpga-pixis" -- reg: should contain the address and the length of the FPGA register set. -- interrupt-parent: should specify phandle for the interrupt controller. -- interrupts: should specify event (wakeup) IRQ. - -Example (P1022DS): - - board-control@3,0 { - compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - interrupt-parent = <&mpic>; - interrupts = <8 8 0 0>; - }; - -* Freescale BCSR GPIO banks - -Some BCSR registers act as simple GPIO controllers, each such -register can be represented by the gpio-controller node. - -Required properities: -- compatible : Should be "fsl,-bcsr-gpio". -- reg : Should contain the address and the length of the GPIO bank - register. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify optional parameters (currently unused). -- gpio-controller : Marks the port as GPIO controller. - -Example: - - bcsr@1,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8360mds-bcsr"; - reg = <1 0 0x8000>; - ranges = <0 1 0 0x8000>; - - bcsr13: gpio-controller@d { - #gpio-cells = <2>; - compatible = "fsl,mpc8360mds-bcsr-gpio"; - reg = <0xd 1>; - gpio-controller; - }; - }; - -* Freescale on-board FPGA connected on I2C bus - -Some Freescale boards like BSC9132QDS have on board FPGA connected on -the i2c bus. - -Required properties: -- compatible: Should be a board-specific string followed by a string - indicating the type of FPGA. Example: - "fsl,-fpga", "fsl,fpga-qixis-i2c" -- reg: Should contain the address of the FPGA - -Example: - fpga: fpga@66 { - compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; - reg = <0x66>; - }; - -* Freescale on-board CPLD - -Some Freescale boards like T1040RDB have an on board CPLD connected. - -Required properties: -- compatible: Should be a board-specific string like "fsl,-cpld" - Example: - "fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld" -- reg: should describe CPLD registers - -Example: - cpld@3,0 { - compatible = "fsl,t1040rdb-cpld"; - reg = <3 0 0x300>; - };