From: Lee Jones Date: Wed, 15 May 2013 09:51:44 +0000 (+0100) Subject: usb: musb: ux500: move the MUSB HDRC configuration into the driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a20b1b791e42d84dedd5854b60abb841ec1a7585;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git usb: musb: ux500: move the MUSB HDRC configuration into the driver The MUSB HDRC configuration never changes between each of the ux500 supported platforms, so there's little point passing it though platform data. If we set it in the driver instead, we can make good use of it when booting with either ATAGs or Device Tree. Cc: linux-usb@vger.kernel.org Acked-by: Felipe Balbi Acked-by: Fabio Baltieri Signed-off-by: Lee Jones Signed-off-by: Linus Walleij --- diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index a21c2e1b7333..49d6e571f5af 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -76,16 +76,8 @@ static struct ux500_musb_board_data musb_board_data = { static u64 ux500_musb_dmamask = DMA_BIT_MASK(32); -static struct musb_hdrc_config musb_hdrc_config = { - .multipoint = true, - .dyn_fifo = true, - .num_eps = 16, - .ram_bits = 16, -}; - static struct musb_hdrc_platform_data musb_platform_data = { .mode = MUSB_OTG, - .config = &musb_hdrc_config, .board_data = &musb_board_data, }; diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index 2c80004e0a83..371776f76ba2 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -30,6 +30,13 @@ #include "musb_core.h" +static struct musb_hdrc_config ux500_musb_hdrc_config = { + .multipoint = true, + .dyn_fifo = true, + .num_eps = 16, + .ram_bits = 16, +}; + struct ux500_glue { struct device *dev; struct platform_device *musb; @@ -229,6 +236,7 @@ static int ux500_probe(struct platform_device *pdev) glue->clk = clk; pdata->platform_ops = &ux500_ops; + pdata->config = &ux500_musb_hdrc_config; platform_set_drvdata(pdev, glue);