From: Tejun Heo Date: Mon, 21 May 2007 16:33:47 +0000 (+0200) Subject: libata: replace ap->cbl tests with ATA_FLAG_SATA tests X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a16abc0b5ff3ef655e40cb5e6671d57f5dde513d;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git libata: replace ap->cbl tests with ATA_FLAG_SATA tests ap->cbl == ATA_CBL_SATA indicates SATA cable while ap->flags & ATA_FLAG_SATA indicates SATA host port. Till now they always gave the same result but SATA/PATA bridge handling will change that. Switch to ATA_FLAG_SATA test if we're testing for host port type. Signed-off-by: Tejun Heo Cc: Alan Cox Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 90ed2b9a34de..74c4cd9ad82b 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3355,7 +3355,7 @@ int ata_std_prereset(struct ata_port *ap, unsigned long deadline) return 0; /* if SATA, resume phy */ - if (ap->cbl == ATA_CBL_SATA) { + if (ap->flags & ATA_FLAG_SATA) { rc = sata_phy_resume(ap, timing, deadline); /* whine about phy resume failure but proceed */ if (rc && rc != -EOPNOTSUPP) @@ -5656,7 +5656,7 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance) */ int sata_scr_valid(struct ata_port *ap) { - return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read; + return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read; } /** @@ -6323,7 +6323,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) if (!ata_port_is_dummy(ap)) ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p " "ctl 0x%p bmdma 0x%p irq %d\n", - ap->cbl == ATA_CBL_SATA ? 'S' : 'P', + (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', ata_mode_string(xfer_mask), ap->ioaddr.cmd_addr, ap->ioaddr.ctl_addr,