From: Michael Schmitz Date: Sat, 11 Jan 2014 00:58:55 +0000 (+1300) Subject: m68k/irq - Use polled IRQ flag for MFP timer cascaded interrupts X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a0b7b242261c8c1097925663bf44d51c1e357e58;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git m68k/irq - Use polled IRQ flag for MFP timer cascaded interrupts Some Atari hardware has no capacity to raise interrupts (e.g. network or USB adapter hardware attached via ROM port). The driver interrupt routine is called from a timer interrupt (timer D) in these cases, using chained device specific pseudo interrupts (IRQ_MFP_TIMER1 ff.) These interrupts will more often than not, return IRQ_NONE as there is not always work for the device handler when called. Too many unhandled interrupts will result in the interrupt being disabled by the stuck interrupt watchdog. As preferred option to flag interrupts as needing exclusion from the watchdog mechanism, tglx added the IRQ_IS_POLLED flag for use in such a case. Currently, two interrupts need to use this flag. Add more users as needed. Signed-off-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven --- diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c index 20cde4e9fc77..3e73a63c066f 100644 --- a/arch/m68k/atari/ataints.c +++ b/arch/m68k/atari/ataints.c @@ -333,6 +333,9 @@ void __init atari_init_IRQ(void) m68k_setup_irq_controller(&atari_mfptimer_chip, handle_simple_irq, IRQ_MFP_TIMER1, 8); + irq_set_status_flags(IRQ_MFP_TIMER1, IRQ_IS_POLLED); + irq_set_status_flags(IRQ_MFP_TIMER2, IRQ_IS_POLLED); + /* prepare timer D data for use as poll interrupt */ /* set Timer D data Register - needs to be > 0 */ st_mfp.tim_dt_d = 254; /* < 100 Hz */