From: Alan Stern Date: Mon, 1 Oct 2012 14:31:53 +0000 (-0400) Subject: USB: update documentation for URB_ISO_ASAP X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=a03bede5c73a6876fa891cfe82a65460dc9f4698;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git USB: update documentation for URB_ISO_ASAP This patch (as1611) updates the USB documentation and kerneldoc to give a more precise meaning for the URB_ISO_ASAP flag and to explain more of the details of scheduling for isochronous URBs. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt index b3f606b81a03..8d1e2a9ebbba 100644 --- a/Documentation/usb/error-codes.txt +++ b/Documentation/usb/error-codes.txt @@ -35,9 +35,8 @@ USB-specific: d) ISO: number_of_packets is < 0 e) various other cases --EAGAIN a) specified ISO start frame too early - b) (using ISO-ASAP) too much scheduled for the future - wait some time and try again. +-EXDEV ISO: URB_ISO_ASAP wasn't specified and all the frames + the URB would be scheduled in have already expired. -EFBIG Host controller driver can't schedule that many ISO frames. diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 9d912bfdcffe..3662287e2f4f 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -214,9 +214,25 @@ EXPORT_SYMBOL_GPL(usb_unanchor_urb); * urb->interval is modified to reflect the actual transfer period used * (normally some power of two units). And for isochronous urbs, * urb->start_frame is modified to reflect when the URB's transfers were - * scheduled to start. Not all isochronous transfer scheduling policies - * will work, but most host controller drivers should easily handle ISO - * queues going from now until 10-200 msec into the future. + * scheduled to start. + * + * Not all isochronous transfer scheduling policies will work, but most + * host controller drivers should easily handle ISO queues going from now + * until 10-200 msec into the future. Drivers should try to keep at + * least one or two msec of data in the queue; many controllers require + * that new transfers start at least 1 msec in the future when they are + * added. If the driver is unable to keep up and the queue empties out, + * the behavior for new submissions is governed by the URB_ISO_ASAP flag. + * If the flag is set, or if the queue is idle, then the URB is always + * assigned to the first available (and not yet expired) slot in the + * endpoint's schedule. If the flag is not set and the queue is active + * then the URB is always assigned to the next slot in the schedule + * following the end of the endpoint's previous URB, even if that slot is + * in the past. When a packet is assigned in this way to a slot that has + * already expired, the packet is not transmitted and the corresponding + * usb_iso_packet_descriptor's status field will return -EXDEV. If this + * would happen to all the packets in the URB, submission fails with a + * -EXDEV error code. * * For control endpoints, the synchronous usb_control_msg() call is * often used (in non-interrupt context) instead of this call. diff --git a/include/linux/usb.h b/include/linux/usb.h index 10278d18709c..f92cdf0c1457 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1129,8 +1129,8 @@ extern int usb_disabled(void); * Note: URB_DIR_IN/OUT is automatically set in usb_submit_urb(). */ #define URB_SHORT_NOT_OK 0x0001 /* report short reads as errors */ -#define URB_ISO_ASAP 0x0002 /* iso-only, urb->start_frame - * ignored */ +#define URB_ISO_ASAP 0x0002 /* iso-only; use the first unexpired + * slot in the schedule */ #define URB_NO_TRANSFER_DMA_MAP 0x0004 /* urb->transfer_dma valid on submit */ #define URB_NO_FSBR 0x0020 /* UHCI-specific */ #define URB_ZERO_PACKET 0x0040 /* Finish bulk OUT with short packet */ @@ -1309,15 +1309,20 @@ typedef void (*usb_complete_t)(struct urb *); * the transfer interval in the endpoint descriptor is logarithmic. * Device drivers must convert that value to linear units themselves.) * - * Isochronous URBs normally use the URB_ISO_ASAP transfer flag, telling - * the host controller to schedule the transfer as soon as bandwidth - * utilization allows, and then set start_frame to reflect the actual frame - * selected during submission. Otherwise drivers must specify the start_frame - * and handle the case where the transfer can't begin then. However, drivers - * won't know how bandwidth is currently allocated, and while they can - * find the current frame using usb_get_current_frame_number () they can't - * know the range for that frame number. (Ranges for frame counter values - * are HC-specific, and can go from 256 to 65536 frames from "now".) + * If an isochronous endpoint queue isn't already running, the host + * controller will schedule a new URB to start as soon as bandwidth + * utilization allows. If the queue is running then a new URB will be + * scheduled to start in the first transfer slot following the end of the + * preceding URB, if that slot has not already expired. If the slot has + * expired (which can happen when IRQ delivery is delayed for a long time), + * the scheduling behavior depends on the URB_ISO_ASAP flag. If the flag + * is clear then the URB will be scheduled to start in the expired slot, + * implying that some of its packets will not be transferred; if the flag + * is set then the URB will be scheduled in the first unexpired slot, + * breaking the queue's synchronization. Upon URB completion, the + * start_frame field will be set to the (micro)frame number in which the + * transfer was scheduled. Ranges for frame counter values are HC-specific + * and can go from as low as 256 to as high as 65536 frames. * * Isochronous URBs have a different data transfer model, in part because * the quality of service is only "best effort". Callers provide specially