From: Cornelia Huck Date: Sun, 1 May 2005 15:59:00 +0000 (-0700) Subject: [PATCH] s390: cio documentation X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9fc1427a01a9df3605e219c6de0c59c4639209a1;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git [PATCH] s390: cio documentation Synchronize documentation with current interface. Signed-off-by: Martin Schwidefsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt index d9397170fb36..f0be389c7116 100644 --- a/Documentation/s390/cds.txt +++ b/Documentation/s390/cds.txt @@ -56,12 +56,16 @@ read_dev_chars() read device characteristics read_conf_data() +read_conf_data_lpm() read configuration data. ccw_device_get_ciw() get commands from extended sense data. ccw_device_start() +ccw_device_start_timeout() +ccw_device_start_key() +ccw_device_start_key_timeout() initiate an I/O request. ccw_device_resume() @@ -197,19 +201,21 @@ The read_dev_chars() function returns : operational. -read_conf_data() - Read Configuration Data +read_conf_data(), read_conf_data_lpm() - Read Configuration Data Retrieve the device dependent configuration data. Please have a look at your device dependent I/O commands for the device specific layout of the node -descriptor elements. +descriptor elements. read_conf_data_lpm() will retrieve the configuration data +for a specific path. -The function is meant to be called with an irq handler in place; that is, +The function is meant to be called with the device already enabled; that is, at earliest during set_online() processing. The function may be called enabled or disabled, but the device must not be locked -int read_conf_data(struct ccw_device, void **buffer, int *length, __u8 lpm); +int read_conf_data(struct ccw_device, void **buffer, int *length); +int read_conf_data_lpm(struct ccw_device, void **buffer, int *length, __u8 lpm); cdev - the ccw_device the data is requested for. buffer - Pointer to a buffer pointer. The read_conf_data() routine @@ -263,6 +269,25 @@ int ccw_device_start(struct ccw_device *cdev, unsigned long intparm, __u8 lpm, unsigned long flags); +int ccw_device_start_timeout(struct ccw_device *cdev, + struct ccw1 *cpa, + unsigned long intparm, + __u8 lpm, + unsigned long flags, + int expires); +int ccw_device_start_key(struct ccw_device *cdev, + struct ccw1 *cpa, + unsigned long intparm, + __u8 lpm, + __u8 key, + unsigned long flags); +int ccw_device_start_key_timeout(struct ccw_device *cdev, + struct ccw1 *cpa, + unsigned long intparm, + __u8 lpm, + __u8 key, + unsigned long flags, + int expires); cdev : ccw_device the I/O is destined for cpa : logical start address of channel program @@ -272,7 +297,12 @@ user_intparm : user specific interrupt information; will be presented particular I/O request. lpm : defines the channel path to be used for a specific I/O request. A value of 0 will make cio use the opm. +key : the storage key to use for the I/O (useful for operating on a + storage with a storage key != default key) flag : defines the action to be performed for I/O processing +expires : timeout value in jiffies. The common I/O layer will terminate + the running program after this and call the interrupt handler + with ERR_PTR(-ETIMEDOUT) as irb. Possible flag values are : @@ -327,6 +357,13 @@ current (last) I/O request. In case of a delayed status notification no special interrupt will be presented to indicate I/O completion as the I/O request was never started, even though ccw_device_start() returned with successful completion. +The irb may contain an error value, and the device driver should check for this +first: + +-ETIMEDOUT: the common I/O layer terminated the request after the specified + timeout value +-EIO: the common I/O layer terminated the request due to an error state + If the concurrent sense flag in the extended status word in the irb is set, the field irb->scsw.count describes the numer of device specific sense bytes available in the extended control word irb->scsw.ecw[0]. No device sensing by