From: Ayaz Abdulla Date: Wed, 23 Apr 2008 18:37:30 +0000 (-0400) Subject: forcedeth: realtek phy crossover detection X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9f3f7910c67adfb520bbae3d8b16985439a97198;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git forcedeth: realtek phy crossover detection This patch fixes an issue seen with the realtek 8201 phy. This phy has a problem with crossover detection and it needs to be disabled. The problem only arises on certain switches. Therefore, a module parameter has been added to allow enabling crossover detection if needed. The default will be set to disabled. Signed-off-by: Ayaz Abdulla Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 73d85b31fbd..35f66d4a459 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -483,16 +483,22 @@ union ring_type { #define DESC_VER_3 3 /* PHY defines */ -#define PHY_OUI_MARVELL 0x5043 -#define PHY_OUI_CICADA 0x03f1 -#define PHY_OUI_VITESSE 0x01c1 -#define PHY_OUI_REALTEK 0x0732 +#define PHY_OUI_MARVELL 0x5043 +#define PHY_OUI_CICADA 0x03f1 +#define PHY_OUI_VITESSE 0x01c1 +#define PHY_OUI_REALTEK 0x0732 +#define PHY_OUI_REALTEK2 0x0020 #define PHYID1_OUI_MASK 0x03ff #define PHYID1_OUI_SHFT 6 #define PHYID2_OUI_MASK 0xfc00 #define PHYID2_OUI_SHFT 10 #define PHYID2_MODEL_MASK 0x03f0 -#define PHY_MODEL_MARVELL_E3016 0x220 +#define PHY_MODEL_REALTEK_8211 0x0110 +#define PHY_REV_MASK 0x0001 +#define PHY_REV_REALTEK_8211B 0x0000 +#define PHY_REV_REALTEK_8211C 0x0001 +#define PHY_MODEL_REALTEK_8201 0x0200 +#define PHY_MODEL_MARVELL_E3016 0x0220 #define PHY_MARVELL_E3016_INITMASK 0x0300 #define PHY_CICADA_INIT1 0x0f000 #define PHY_CICADA_INIT2 0x0e00 @@ -519,10 +525,18 @@ union ring_type { #define PHY_REALTEK_INIT_REG1 0x1f #define PHY_REALTEK_INIT_REG2 0x19 #define PHY_REALTEK_INIT_REG3 0x13 +#define PHY_REALTEK_INIT_REG4 0x14 +#define PHY_REALTEK_INIT_REG5 0x18 +#define PHY_REALTEK_INIT_REG6 0x11 #define PHY_REALTEK_INIT1 0x0000 #define PHY_REALTEK_INIT2 0x8e00 #define PHY_REALTEK_INIT3 0x0001 #define PHY_REALTEK_INIT4 0xad17 +#define PHY_REALTEK_INIT5 0xfb54 +#define PHY_REALTEK_INIT6 0xf5c7 +#define PHY_REALTEK_INIT7 0x1000 +#define PHY_REALTEK_INIT8 0x0003 +#define PHY_REALTEK_INIT_MSK1 0x0003 #define PHY_GIGABIT 0x0100 @@ -701,6 +715,7 @@ struct fe_priv { int wolenabled; unsigned int phy_oui; unsigned int phy_model; + unsigned int phy_rev; u16 gigabit; int intr_test; int recover_error; @@ -714,6 +729,7 @@ struct fe_priv { u32 txrxctl_bits; u32 vlanctl_bits; u32 driver_data; + u32 device_id; u32 register_size; int rx_csum; u32 mac_in_use; @@ -824,6 +840,16 @@ enum { }; static int dma_64bit = NV_DMA_64BIT_ENABLED; +/* + * Crossover Detection + * Realtek 8201 phy + some OEM boards do not work properly. + */ +enum { + NV_CROSSOVER_DETECTION_DISABLED, + NV_CROSSOVER_DETECTION_ENABLED +}; +static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED; + static inline struct fe_priv *get_nvpriv(struct net_device *dev) { return netdev_priv(dev); @@ -1088,25 +1114,53 @@ static int phy_init(struct net_device *dev) } } if (np->phy_oui == PHY_OUI_REALTEK) { - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; - } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; - } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; - } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; + if (np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211B) { + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; + if (np->phy_model == PHY_MODEL_REALTEK_8201) { + if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) { + phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ); + phy_reserved |= PHY_REALTEK_INIT7; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } } } @@ -1246,26 +1300,71 @@ static int phy_init(struct net_device *dev) } } if (np->phy_oui == PHY_OUI_REALTEK) { - /* reset could have cleared these out, set them back */ - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; - } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; - } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; - } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; + if (np->phy_model == PHY_MODEL_REALTEK_8211 && + np->phy_rev == PHY_REV_REALTEK_8211B) { + /* reset could have cleared these out, set them back */ + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } } - if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { - printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); - return PHY_ERROR; + if (np->phy_model == PHY_MODEL_REALTEK_8201) { + if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 || + np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) { + phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ); + phy_reserved |= PHY_REALTEK_INIT7; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } + if (phy_cross == NV_CROSSOVER_DETECTION_DISABLED) { + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ); + phy_reserved &= ~PHY_REALTEK_INIT_MSK1; + phy_reserved |= PHY_REALTEK_INIT3; + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) { + printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev)); + return PHY_ERROR; + } + } } } @@ -5254,6 +5353,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i /* copy of driver data */ np->driver_data = id->driver_data; + /* copy of device id */ + np->device_id = id->device; /* handle different descriptor versions */ if (id->driver_data & DEV_HAS_HIGH_DMA) { @@ -5543,6 +5644,14 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i pci_name(pci_dev), id1, id2, phyaddr); np->phyaddr = phyaddr; np->phy_oui = id1 | id2; + + /* Realtek hardcoded phy id1 to all zero's on certain phys */ + if (np->phy_oui == PHY_OUI_REALTEK2) + np->phy_oui = PHY_OUI_REALTEK; + /* Setup phy revision for Realtek */ + if (np->phy_oui == PHY_OUI_REALTEK && np->phy_model == PHY_MODEL_REALTEK_8211) + np->phy_rev = mii_rw(dev, phyaddr, MII_RESV1, MII_READ) & PHY_REV_MASK; + break; } if (i == 33) { @@ -5621,6 +5730,28 @@ out: return err; } +static void nv_restore_phy(struct net_device *dev) +{ + struct fe_priv *np = netdev_priv(dev); + u16 phy_reserved, mii_control; + + if (np->phy_oui == PHY_OUI_REALTEK && + np->phy_model == PHY_MODEL_REALTEK_8201 && + phy_cross == NV_CROSSOVER_DETECTION_DISABLED) { + mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3); + phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ); + phy_reserved &= ~PHY_REALTEK_INIT_MSK1; + phy_reserved |= PHY_REALTEK_INIT8; + mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved); + mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1); + + /* restart auto negotiation */ + mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ); + mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE); + mii_rw(dev, np->phyaddr, MII_BMCR, mii_control); + } +} + static void __devexit nv_remove(struct pci_dev *pci_dev) { struct net_device *dev = pci_get_drvdata(pci_dev); @@ -5637,6 +5768,9 @@ static void __devexit nv_remove(struct pci_dev *pci_dev) writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll); + /* restore any phy related changes */ + nv_restore_phy(dev); + /* free all structures */ free_rings(dev); iounmap(get_hwbase(dev)); @@ -5888,6 +6022,8 @@ module_param(msix, int, 0); MODULE_PARM_DESC(msix, "MSIX interrupts are enabled by setting to 1 and disabled by setting to 0."); module_param(dma_64bit, int, 0); MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0."); +module_param(phy_cross, int, 0); +MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0."); MODULE_AUTHOR("Manfred Spraul "); MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");