From: Wey-Yi Guy Date: Fri, 12 Jun 2009 20:22:53 +0000 (-0700) Subject: iwlwifi: modify sensitivity value for 5150 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9d67187dbd93df98011f7229f76de25d142b57cc;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git iwlwifi: modify sensitivity value for 5150 In 5150 there is a long delay between the AGC(Automatic Gain Control) command till the RF is stabilized causing us to miss detections when there was adjacent channel noise, so we need to adjusted the Sensitivity calibration for 5150 differently. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index b3c648ce8c7b..0e445a9c6929 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -407,6 +407,28 @@ static struct iwl_sensitivity_ranges iwl5000_sensitivity = { .nrg_th_ofdm = 95, }; +static struct iwl_sensitivity_ranges iwl5150_sensitivity = { + .min_nrg_cck = 95, + .max_nrg_cck = 0, /* not used, set to 0 */ + .auto_corr_min_ofdm = 90, + .auto_corr_min_ofdm_mrc = 170, + .auto_corr_min_ofdm_x1 = 105, + .auto_corr_min_ofdm_mrc_x1 = 220, + + .auto_corr_max_ofdm = 120, + .auto_corr_max_ofdm_mrc = 210, + /* max = min for performance bug in 5150 DSP */ + .auto_corr_max_ofdm_x1 = 105, + .auto_corr_max_ofdm_mrc_x1 = 220, + + .auto_corr_min_cck = 125, + .auto_corr_max_cck = 200, + .auto_corr_min_cck_mrc = 170, + .auto_corr_max_cck_mrc = 400, + .nrg_th_cck = 95, + .nrg_th_ofdm = 95, +}; + static const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv, size_t offset) { @@ -826,8 +848,6 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) BIT(IEEE80211_BAND_5GHZ); priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; - priv->hw_params.sens = &iwl5000_sensitivity; - priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; @@ -836,9 +856,11 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) if (priv->cfg->ops->lib->temp_ops.set_ct_kill) priv->cfg->ops->lib->temp_ops.set_ct_kill(priv); + /* Set initial sensitivity parameters */ /* Set initial calibration set */ switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { case CSR_HW_REV_TYPE_5150: + priv->hw_params.sens = &iwl5150_sensitivity; priv->hw_params.calib_init_cfg = BIT(IWL_CALIB_DC) | BIT(IWL_CALIB_LO) | @@ -847,6 +869,7 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) break; default: + priv->hw_params.sens = &iwl5000_sensitivity; priv->hw_params.calib_init_cfg = BIT(IWL_CALIB_XTAL) | BIT(IWL_CALIB_LO) |