From: Chon Ming Lee Date: Fri, 2 May 2014 11:27:47 +0000 (+0300) Subject: drm/i915/chv: Add update and enable pll for Cherryview X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9d556c99ed48ae9aa6e41cb5542f1735bc70c16e;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/i915/chv: Add update and enable pll for Cherryview Added programming PLL for CHV based on "Application note for 1273 CHV Display phy". v2: -Break the common lane reset into another patch. -Break the clock calculation into another patch. -The changes are based on Ville review. -Rework based on DPIO register define naming convention change. -Break the dpio write into few lines to improve readability. -Correct the udelay during chv_enable_pll. -clean up some magic numbers with some new define. -program the afc recal bit which was missed. v3: Based on Ville review - minor correction of the bit defination - add deassert/propagate data lane reset v4: Corrected the udelay between dclkp enable and pll enable. Minor comment and better way to clear the TX lane reset. v5: Squash in fixup from Rafael Barbalho. [vsyrjala: v6: Polish the defines (Imre)] Reviewed-by: Ville Syrjälä Reviewed-by: Imre Deak Signed-off-by: Chon Ming Lee Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 921b48fbf571..816470ea5736 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -681,6 +681,12 @@ enum punit_power_well { #define _VLV_PCS_DW9_CH1 0x8424 #define VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1) +#define _CHV_PCS_DW10_CH0 0x8228 +#define _CHV_PCS_DW10_CH1 0x8428 +#define DPIO_PCS_SWING_CALC_TX0_TX2 (1<<30) +#define DPIO_PCS_SWING_CALC_TX1_TX3 (1<<31) +#define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1) + #define _VLV_PCS_DW11_CH0 0x822c #define _VLV_PCS_DW11_CH1 0x842c #define VLV_PCS_DW11(ch) _PORT(ch, _VLV_PCS_DW11_CH0, _VLV_PCS_DW11_CH1) @@ -699,14 +705,21 @@ enum punit_power_well { #define _VLV_TX_DW2_CH0 0x8288 #define _VLV_TX_DW2_CH1 0x8488 +#define DPIO_SWING_MARGIN_SHIFT 16 +#define DPIO_SWING_MARGIN_MASK (0xff << DPIO_SWING_MARGIN_SHIFT) +#define DPIO_UNIQ_TRANS_SCALE_SHIFT 8 #define VLV_TX_DW2(ch) _PORT(ch, _VLV_TX_DW2_CH0, _VLV_TX_DW2_CH1) #define _VLV_TX_DW3_CH0 0x828c #define _VLV_TX_DW3_CH1 0x848c +/* The following bit for CHV phy */ +#define DPIO_TX_UNIQ_TRANS_SCALE_EN (1<<27) #define VLV_TX_DW3(ch) _PORT(ch, _VLV_TX_DW3_CH0, _VLV_TX_DW3_CH1) #define _VLV_TX_DW4_CH0 0x8290 #define _VLV_TX_DW4_CH1 0x8490 +#define DPIO_SWING_DEEMPH9P5_SHIFT 24 +#define DPIO_SWING_DEEMPH9P5_MASK (0xff << DPIO_SWING_DEEMPH9P5_SHIFT) #define VLV_TX_DW4(ch) _PORT(ch, _VLV_TX_DW4_CH0, _VLV_TX_DW4_CH1) #define _VLV_TX3_DW4_CH0 0x690 @@ -726,6 +739,62 @@ enum punit_power_well { #define _VLV_TX_DW14_CH1 0x84b8 #define VLV_TX_DW14(ch) _PORT(ch, _VLV_TX_DW14_CH0, _VLV_TX_DW14_CH1) +/* CHV dpPhy registers */ +#define _CHV_PLL_DW0_CH0 0x8000 +#define _CHV_PLL_DW0_CH1 0x8180 +#define CHV_PLL_DW0(ch) _PIPE(ch, _CHV_PLL_DW0_CH0, _CHV_PLL_DW0_CH1) + +#define _CHV_PLL_DW1_CH0 0x8004 +#define _CHV_PLL_DW1_CH1 0x8184 +#define DPIO_CHV_N_DIV_SHIFT 8 +#define DPIO_CHV_M1_DIV_BY_2 (0 << 0) +#define CHV_PLL_DW1(ch) _PIPE(ch, _CHV_PLL_DW1_CH0, _CHV_PLL_DW1_CH1) + +#define _CHV_PLL_DW2_CH0 0x8008 +#define _CHV_PLL_DW2_CH1 0x8188 +#define CHV_PLL_DW2(ch) _PIPE(ch, _CHV_PLL_DW2_CH0, _CHV_PLL_DW2_CH1) + +#define _CHV_PLL_DW3_CH0 0x800c +#define _CHV_PLL_DW3_CH1 0x818c +#define DPIO_CHV_FRAC_DIV_EN (1 << 16) +#define DPIO_CHV_FIRST_MOD (0 << 8) +#define DPIO_CHV_SECOND_MOD (1 << 8) +#define DPIO_CHV_FEEDFWD_GAIN_SHIFT 0 +#define CHV_PLL_DW3(ch) _PIPE(ch, _CHV_PLL_DW3_CH0, _CHV_PLL_DW3_CH1) + +#define _CHV_PLL_DW6_CH0 0x8018 +#define _CHV_PLL_DW6_CH1 0x8198 +#define DPIO_CHV_GAIN_CTRL_SHIFT 16 +#define DPIO_CHV_INT_COEFF_SHIFT 8 +#define DPIO_CHV_PROP_COEFF_SHIFT 0 +#define CHV_PLL_DW6(ch) _PIPE(ch, _CHV_PLL_DW6_CH0, _CHV_PLL_DW6_CH1) + +#define _CHV_CMN_DW13_CH0 0x8134 +#define _CHV_CMN_DW0_CH1 0x8080 +#define DPIO_CHV_S1_DIV_SHIFT 21 +#define DPIO_CHV_P1_DIV_SHIFT 13 /* 3 bits */ +#define DPIO_CHV_P2_DIV_SHIFT 8 /* 5 bits */ +#define DPIO_CHV_K_DIV_SHIFT 4 +#define DPIO_PLL_FREQLOCK (1 << 1) +#define DPIO_PLL_LOCK (1 << 0) +#define CHV_CMN_DW13(ch) _PIPE(ch, _CHV_CMN_DW13_CH0, _CHV_CMN_DW0_CH1) + +#define _CHV_CMN_DW14_CH0 0x8138 +#define _CHV_CMN_DW1_CH1 0x8084 +#define DPIO_AFC_RECAL (1 << 14) +#define DPIO_DCLKP_EN (1 << 13) +#define CHV_CMN_DW14(ch) _PIPE(ch, _CHV_CMN_DW14_CH0, _CHV_CMN_DW1_CH1) + +#define CHV_CMN_DW30 0x8178 +#define DPIO_LRC_BYPASS (1 << 3) + +#define _TXLANE(ch, lane, offset) ((ch ? 0x2400 : 0) + \ + (lane) * 0x200 + (offset)) + +#define CHV_TX_DW11(ch, lane) _TXLANE(ch, lane, 0xac) +#define DPIO_FRC_LATENCY_SHFIT 8 +#define CHV_TX_DW14(ch, lane) _TXLANE(ch, lane, 0xb8) +#define DPIO_UPAR_SHIFT 30 /* * Fence registers */ @@ -1415,6 +1484,7 @@ enum punit_power_well { #define DPLL_LOCK_VLV (1<<15) #define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14) #define DPLL_INTEGRATED_CLOCK_VLV (1<<13) +#define DPLL_SSC_REF_CLOCK_CHV (1<<13) #define DPLL_PORTC_READY_MASK (0xf << 4) #define DPLL_PORTB_READY_MASK (0xf) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 13330fd7b21c..9bfc271c751f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1555,6 +1555,49 @@ static void vlv_enable_pll(struct intel_crtc *crtc) udelay(150); /* wait for warmup */ } +static void chv_enable_pll(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + enum dpio_channel port = vlv_pipe_to_channel(pipe); + int dpll = DPLL(crtc->pipe); + u32 tmp; + + assert_pipe_disabled(dev_priv, crtc->pipe); + + BUG_ON(!IS_CHERRYVIEW(dev_priv->dev)); + + mutex_lock(&dev_priv->dpio_lock); + + /* Enable back the 10bit clock to display controller */ + tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + tmp |= DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp); + + /* + * Need to wait > 100ns between dclkp clock enable bit and PLL enable. + */ + udelay(1); + + /* Enable PLL */ + tmp = I915_READ(dpll); + tmp |= DPLL_VCO_ENABLE; + I915_WRITE(dpll, tmp); + + /* Check PLL is locked */ + if (wait_for(((I915_READ(dpll) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1)) + DRM_ERROR("PLL %d failed to lock\n", pipe); + + /* Deassert soft data lane reset*/ + tmp = vlv_dpio_read(dev_priv, pipe, VLV_PCS_DW0(port)); + tmp |= (DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), tmp); + + + mutex_unlock(&dev_priv->dpio_lock); +} + static void i9xx_enable_pll(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; @@ -4470,8 +4513,12 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc) is_dsi = intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI); - if (!is_dsi) - vlv_enable_pll(intel_crtc); + if (!is_dsi) { + if (IS_CHERRYVIEW(dev)) + chv_enable_pll(intel_crtc); + else + vlv_enable_pll(intel_crtc); + } for_each_encoder_on_crtc(dev, crtc, encoder) if (encoder->pre_enable) @@ -5326,6 +5373,87 @@ static void vlv_update_pll(struct intel_crtc *crtc) mutex_unlock(&dev_priv->dpio_lock); } +static void chv_update_pll(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + int dpll_reg = DPLL(crtc->pipe); + enum dpio_channel port = vlv_pipe_to_channel(pipe); + u32 val, loopfilter, intcoeff; + u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac; + int refclk; + + mutex_lock(&dev_priv->dpio_lock); + + bestn = crtc->config.dpll.n; + bestm2_frac = crtc->config.dpll.m2 & 0x3fffff; + bestm1 = crtc->config.dpll.m1; + bestm2 = crtc->config.dpll.m2 >> 22; + bestp1 = crtc->config.dpll.p1; + bestp2 = crtc->config.dpll.p2; + + /* + * Enable Refclk and SSC + */ + val = I915_READ(dpll_reg); + val |= (DPLL_SSC_REF_CLOCK_CHV | DPLL_REFA_CLK_ENABLE_VLV); + I915_WRITE(dpll_reg, val); + + /* Propagate soft reset to data lane reset */ + val = vlv_dpio_read(dev_priv, pipe, VLV_PCS_DW0(port)); + val &= ~(DPIO_PCS_TX_LANE2_RESET | DPIO_PCS_TX_LANE1_RESET); + vlv_dpio_write(dev_priv, pipe, VLV_PCS_DW0(port), val); + + /* Disable 10bit clock to display controller */ + val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)); + val &= ~DPIO_DCLKP_EN; + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val); + + /* p1 and p2 divider */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port), + 5 << DPIO_CHV_S1_DIV_SHIFT | + bestp1 << DPIO_CHV_P1_DIV_SHIFT | + bestp2 << DPIO_CHV_P2_DIV_SHIFT | + 1 << DPIO_CHV_K_DIV_SHIFT); + + /* Feedback post-divider - m2 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2); + + /* Feedback refclk divider - n and m1 */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port), + DPIO_CHV_M1_DIV_BY_2 | + 1 << DPIO_CHV_N_DIV_SHIFT); + + /* M2 fraction division */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac); + + /* M2 fraction division enable */ + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), + DPIO_CHV_FRAC_DIV_EN | + (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT)); + + /* Loop filter */ + refclk = i9xx_get_refclk(&crtc->base, 0); + loopfilter = 5 << DPIO_CHV_PROP_COEFF_SHIFT | + 2 << DPIO_CHV_GAIN_CTRL_SHIFT; + if (refclk == 100000) + intcoeff = 11; + else if (refclk == 38400) + intcoeff = 10; + else + intcoeff = 9; + loopfilter |= intcoeff << DPIO_CHV_INT_COEFF_SHIFT; + vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter); + + /* AFC Recal */ + vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), + vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) | + DPIO_AFC_RECAL); + + mutex_unlock(&dev_priv->dpio_lock); +} + static void i9xx_update_pll(struct intel_crtc *crtc, intel_clock_t *reduced_clock, int num_connectors) @@ -5709,6 +5837,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, i8xx_update_pll(intel_crtc, has_reduced_clock ? &reduced_clock : NULL, num_connectors); + } else if (IS_CHERRYVIEW(dev)) { + chv_update_pll(intel_crtc); } else if (IS_VALLEYVIEW(dev)) { vlv_update_pll(intel_crtc); } else {