From: Ezequiel Garcia Date: Tue, 25 Feb 2014 16:25:22 +0000 (-0300) Subject: UBI: R/O block driver on top of UBI volumes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9d54c8a33eec;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git UBI: R/O block driver on top of UBI volumes This commit introduces read-only block device emulation on top of UBI volumes. Given UBI takes care of wear leveling and bad block management it's possible to add a thin layer to enable block device access to UBI volumes. This allows to use a block-oriented filesystem on a flash device. The UBI block devices are meant to be used in conjunction with any regular, block-oriented file system (e.g. ext4), although it's primarily targeted at read-only file systems, such as squashfs. Block devices are created upon user request through new ioctls: UBI_IOCVOLATTBLK to attach and UBI_IOCVOLDETBLK to detach. Also, a new UBI module parameter is added 'ubi.block'. This parameter is needed in order to attach a block device on boot-up time, allowing to mount the rootfs on a ubiblock device. For instance, you could have these kernel parameters: ubi.mtd=5 ubi.block=0,0 root=/dev/ubiblock0_0 Or, if you compile ubi as a module: $ modprobe ubi mtd=/dev/mtd5 block=/dev/ubi0_0 Artem: amend commentaries and massage the patch a little bit. Signed-off-by: Ezequiel Garcia Signed-off-by: Artem Bityutskiy --- diff --git a/drivers/mtd/ubi/Kconfig b/drivers/mtd/ubi/Kconfig index 36663af56d89..783fb186d876 100644 --- a/drivers/mtd/ubi/Kconfig +++ b/drivers/mtd/ubi/Kconfig @@ -87,4 +87,19 @@ config MTD_UBI_GLUEBI work on top of UBI. Do not enable this unless you use legacy software. +config MTD_UBI_BLOCK + bool "Read-only block devices on top of UBI volumes" + default n + help + This option enables read-only UBI block devices support. UBI block + devices will be layered on top of UBI volumes, which means that the + UBI driver will transparently handle things like bad eraseblocks and + bit-flips. You can put any block-oriented file system on top of UBI + volumes in read-only mode (e.g., ext4), but it is probably most + practical for read-only file systems, like squashfs. + + When selected, this feature will be built in the UBI driver. + + If in doubt, say "N". + endif # MTD_UBI diff --git a/drivers/mtd/ubi/Makefile b/drivers/mtd/ubi/Makefile index b46b0c978581..4e3c3d70d8c3 100644 --- a/drivers/mtd/ubi/Makefile +++ b/drivers/mtd/ubi/Makefile @@ -3,5 +3,6 @@ obj-$(CONFIG_MTD_UBI) += ubi.o ubi-y += vtbl.o vmt.o upd.o build.o cdev.o kapi.o eba.o io.o wl.o attach.o ubi-y += misc.o debug.o ubi-$(CONFIG_MTD_UBI_FASTMAP) += fastmap.o +ubi-$(CONFIG_MTD_UBI_BLOCK) += block.o obj-$(CONFIG_MTD_UBI_GLUEBI) += gluebi.o diff --git a/drivers/mtd/ubi/block.c b/drivers/mtd/ubi/block.c new file mode 100644 index 000000000000..cea7d1cf9d04 --- /dev/null +++ b/drivers/mtd/ubi/block.c @@ -0,0 +1,646 @@ +/* + * Copyright (c) 2014 Ezequiel Garcia + * Copyright (c) 2011 Free Electrons + * + * Driver parameter handling strongly based on drivers/mtd/ubi/build.c + * Copyright (c) International Business Machines Corp., 2006 + * Copyright (c) Nokia Corporation, 2007 + * Authors: Artem Bityutskiy, Frank Haverkamp + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + */ + +/* + * Read-only block devices on top of UBI volumes + * + * A simple implementation to allow a block device to be layered on top of a + * UBI volume. The implementation is provided by creating a static 1-to-1 + * mapping between the block device and the UBI volume. + * + * The addressed byte is obtained from the addressed block sector, which is + * mapped linearly into the corresponding LEB: + * + * LEB number = addressed byte / LEB size + * + * This feature is compiled in the UBI core, and adds a new 'block' parameter + * to allow early block device attaching. Runtime block attach/detach for UBI + * volumes is provided through two new UBI ioctls: UBI_IOCVOLATTBLK and + * UBI_IOCVOLDETBLK. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ubi-media.h" +#include "ubi.h" + +/* Maximum number of supported devices */ +#define UBIBLOCK_MAX_DEVICES 32 + +/* Maximum length of the 'block=' parameter */ +#define UBIBLOCK_PARAM_LEN 63 + +/* Maximum number of comma-separated items in the 'block=' parameter */ +#define UBIBLOCK_PARAM_COUNT 2 + +struct ubiblock_param { + int ubi_num; + int vol_id; + char name[UBIBLOCK_PARAM_LEN+1]; +}; + +/* Numbers of elements set in the @ubiblock_param array */ +static int ubiblock_devs __initdata; + +/* MTD devices specification parameters */ +static struct ubiblock_param ubiblock_param[UBIBLOCK_MAX_DEVICES] __initdata; + +struct ubiblock { + struct ubi_volume_desc *desc; + int ubi_num; + int vol_id; + int refcnt; + int leb_size; + + struct gendisk *gd; + struct request_queue *rq; + + struct workqueue_struct *wq; + struct work_struct work; + + struct mutex dev_mutex; + spinlock_t queue_lock; + struct list_head list; +}; + +/* Linked list of all ubiblock instances */ +static LIST_HEAD(ubiblock_devices); +static DEFINE_MUTEX(devices_mutex); +static int ubiblock_major; + +static int __init ubiblock_set_param(const char *val, + const struct kernel_param *kp) +{ + int i, ret; + size_t len; + struct ubiblock_param *param; + char buf[UBIBLOCK_PARAM_LEN]; + char *pbuf = &buf[0]; + char *tokens[UBIBLOCK_PARAM_COUNT]; + + if (!val) + return -EINVAL; + + len = strnlen(val, UBIBLOCK_PARAM_LEN); + if (len == 0) { + ubi_warn("block: empty 'block=' parameter - ignored\n"); + return 0; + } + + if (len == UBIBLOCK_PARAM_LEN) { + ubi_err("block: parameter \"%s\" is too long, max. is %d\n", + val, UBIBLOCK_PARAM_LEN); + return -EINVAL; + } + + strcpy(buf, val); + + /* Get rid of the final newline */ + if (buf[len - 1] == '\n') + buf[len - 1] = '\0'; + + for (i = 0; i < UBIBLOCK_PARAM_COUNT; i++) + tokens[i] = strsep(&pbuf, ","); + + param = &ubiblock_param[ubiblock_devs]; + if (tokens[1]) { + /* Two parameters: can be 'ubi, vol_id' or 'ubi, vol_name' */ + ret = kstrtoint(tokens[0], 10, ¶m->ubi_num); + if (ret < 0) + return -EINVAL; + + /* Second param can be a number or a name */ + ret = kstrtoint(tokens[1], 10, ¶m->vol_id); + if (ret < 0) { + param->vol_id = -1; + strcpy(param->name, tokens[1]); + } + + } else { + /* One parameter: must be device path */ + strcpy(param->name, tokens[0]); + param->ubi_num = -1; + param->vol_id = -1; + } + + ubiblock_devs++; + + return 0; +} + +static const struct kernel_param_ops ubiblock_param_ops = { + .set = ubiblock_set_param, +}; +module_param_cb(block, &ubiblock_param_ops, NULL, 0); +MODULE_PARM_DESC(block, "Attach block devices to UBI volumes. Parameter format: block=.\n" + "Multiple \"block\" parameters may be specified.\n" + "UBI volumes may be specified by their number, name, or path to the device node.\n" + "Examples\n" + "Using the UBI volume path:\n" + "ubi.block=/dev/ubi0_0\n" + "Using the UBI device, and the volume name:\n" + "ubi.block=0,rootfs\n" + "Using both UBI device number and UBI volume number:\n" + "ubi.block=0,0\n"); + +static struct ubiblock *find_dev_nolock(int ubi_num, int vol_id) +{ + struct ubiblock *dev; + + list_for_each_entry(dev, &ubiblock_devices, list) + if (dev->ubi_num == ubi_num && dev->vol_id == vol_id) + return dev; + return NULL; +} + +static int ubiblock_read_to_buf(struct ubiblock *dev, char *buffer, + int leb, int offset, int len) +{ + int ret; + + ret = ubi_read(dev->desc, leb, buffer, offset, len); + if (ret) { + ubi_err("%s ubi_read error %d", + dev->gd->disk_name, ret); + return ret; + } + return 0; +} + +static int ubiblock_read(struct ubiblock *dev, char *buffer, + sector_t sec, int len) +{ + int ret, leb, offset; + int bytes_left = len; + int to_read = len; + loff_t pos = sec << 9; + + /* Get LEB:offset address to read from */ + offset = do_div(pos, dev->leb_size); + leb = pos; + + while (bytes_left) { + /* + * We can only read one LEB at a time. Therefore if the read + * length is larger than one LEB size, we split the operation. + */ + if (offset + to_read > dev->leb_size) + to_read = dev->leb_size - offset; + + ret = ubiblock_read_to_buf(dev, buffer, leb, offset, to_read); + if (ret) + return ret; + + buffer += to_read; + bytes_left -= to_read; + to_read = bytes_left; + leb += 1; + offset = 0; + } + return 0; +} + +static int do_ubiblock_request(struct ubiblock *dev, struct request *req) +{ + int len, ret; + sector_t sec; + + if (req->cmd_type != REQ_TYPE_FS) + return -EIO; + + if (blk_rq_pos(req) + blk_rq_cur_sectors(req) > + get_capacity(req->rq_disk)) + return -EIO; + + if (rq_data_dir(req) != READ) + return -ENOSYS; /* Write not implemented */ + + sec = blk_rq_pos(req); + len = blk_rq_cur_bytes(req); + + /* + * Let's prevent the device from being removed while we're doing I/O + * work. Notice that this means we serialize all the I/O operations, + * but it's probably of no impact given the NAND core serializes + * flash access anyway. + */ + mutex_lock(&dev->dev_mutex); + ret = ubiblock_read(dev, req->buffer, sec, len); + mutex_unlock(&dev->dev_mutex); + + return ret; +} + +static void ubiblock_do_work(struct work_struct *work) +{ + struct ubiblock *dev = + container_of(work, struct ubiblock, work); + struct request_queue *rq = dev->rq; + struct request *req; + int res; + + spin_lock_irq(rq->queue_lock); + + req = blk_fetch_request(rq); + while (req) { + + spin_unlock_irq(rq->queue_lock); + res = do_ubiblock_request(dev, req); + spin_lock_irq(rq->queue_lock); + + /* + * If we're done with this request, + * we need to fetch a new one + */ + if (!__blk_end_request_cur(req, res)) + req = blk_fetch_request(rq); + } + + spin_unlock_irq(rq->queue_lock); +} + +static void ubiblock_request(struct request_queue *rq) +{ + struct ubiblock *dev; + struct request *req; + + dev = rq->queuedata; + + if (!dev) + while ((req = blk_fetch_request(rq)) != NULL) + __blk_end_request_all(req, -ENODEV); + else + queue_work(dev->wq, &dev->work); +} + +static int ubiblock_open(struct block_device *bdev, fmode_t mode) +{ + struct ubiblock *dev = bdev->bd_disk->private_data; + int ret; + + mutex_lock(&dev->dev_mutex); + if (dev->refcnt > 0) { + /* + * The volume is already open, just increase the reference + * counter. + */ + goto out_done; + } + + /* + * We want users to be aware they should only mount us as read-only. + * It's just a paranoid check, as write requests will get rejected + * in any case. + */ + if (mode & FMODE_WRITE) { + ret = -EPERM; + goto out_unlock; + } + + dev->desc = ubi_open_volume(dev->ubi_num, dev->vol_id, UBI_READONLY); + if (IS_ERR(dev->desc)) { + ubi_err("%s failed to open ubi volume %d_%d", + dev->gd->disk_name, dev->ubi_num, dev->vol_id); + ret = PTR_ERR(dev->desc); + dev->desc = NULL; + goto out_unlock; + } + +out_done: + dev->refcnt++; + mutex_unlock(&dev->dev_mutex); + return 0; + +out_unlock: + mutex_unlock(&dev->dev_mutex); + return ret; +} + +static void ubiblock_release(struct gendisk *gd, fmode_t mode) +{ + struct ubiblock *dev = gd->private_data; + + mutex_lock(&dev->dev_mutex); + dev->refcnt--; + if (dev->refcnt == 0) { + ubi_close_volume(dev->desc); + dev->desc = NULL; + } + mutex_unlock(&dev->dev_mutex); +} + +static int ubiblock_getgeo(struct block_device *bdev, struct hd_geometry *geo) +{ + /* Some tools might require this information */ + geo->heads = 1; + geo->cylinders = 1; + geo->sectors = get_capacity(bdev->bd_disk); + geo->start = 0; + return 0; +} + +static const struct block_device_operations ubiblock_ops = { + .owner = THIS_MODULE, + .open = ubiblock_open, + .release = ubiblock_release, + .getgeo = ubiblock_getgeo, +}; + +int ubiblock_add(struct ubi_volume_info *vi) +{ + struct ubiblock *dev; + struct gendisk *gd; + int disk_capacity; + int ret; + + /* Check that the volume isn't already handled */ + mutex_lock(&devices_mutex); + if (find_dev_nolock(vi->ubi_num, vi->vol_id)) { + mutex_unlock(&devices_mutex); + return -EEXIST; + } + mutex_unlock(&devices_mutex); + + dev = kzalloc(sizeof(struct ubiblock), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + mutex_init(&dev->dev_mutex); + + dev->ubi_num = vi->ubi_num; + dev->vol_id = vi->vol_id; + dev->leb_size = vi->usable_leb_size; + + /* Initialize the gendisk of this ubiblock device */ + gd = alloc_disk(1); + if (!gd) { + ubi_err("block: alloc_disk failed"); + ret = -ENODEV; + goto out_free_dev; + } + + gd->fops = &ubiblock_ops; + gd->major = ubiblock_major; + gd->first_minor = dev->ubi_num * UBI_MAX_VOLUMES + dev->vol_id; + gd->private_data = dev; + sprintf(gd->disk_name, "ubiblock%d_%d", dev->ubi_num, dev->vol_id); + disk_capacity = (vi->size * vi->usable_leb_size) >> 9; + set_capacity(gd, disk_capacity); + dev->gd = gd; + + spin_lock_init(&dev->queue_lock); + dev->rq = blk_init_queue(ubiblock_request, &dev->queue_lock); + if (!dev->rq) { + ubi_err("block: blk_init_queue failed"); + ret = -ENODEV; + goto out_put_disk; + } + + dev->rq->queuedata = dev; + dev->gd->queue = dev->rq; + + /* + * Create one workqueue per volume (per registered block device). + * Rembember workqueues are cheap, they're not threads. + */ + dev->wq = alloc_workqueue(gd->disk_name, 0, 0); + if (!dev->wq) + goto out_free_queue; + INIT_WORK(&dev->work, ubiblock_do_work); + + mutex_lock(&devices_mutex); + list_add_tail(&dev->list, &ubiblock_devices); + mutex_unlock(&devices_mutex); + + /* Must be the last step: anyone can call file ops from now on */ + add_disk(dev->gd); + ubi_msg("%s created from ubi%d:%d(%s)", + dev->gd->disk_name, dev->ubi_num, dev->vol_id, vi->name); + return 0; + +out_free_queue: + blk_cleanup_queue(dev->rq); +out_put_disk: + put_disk(dev->gd); +out_free_dev: + kfree(dev); + + return ret; +} + +static void ubiblock_cleanup(struct ubiblock *dev) +{ + del_gendisk(dev->gd); + blk_cleanup_queue(dev->rq); + ubi_msg("%s released", dev->gd->disk_name); + put_disk(dev->gd); +} + +int ubiblock_del(struct ubi_volume_info *vi) +{ + struct ubiblock *dev; + + mutex_lock(&devices_mutex); + dev = find_dev_nolock(vi->ubi_num, vi->vol_id); + if (!dev) { + mutex_unlock(&devices_mutex); + return -ENODEV; + } + + /* Found a device, let's lock it so we can check if it's busy */ + mutex_lock(&dev->dev_mutex); + if (dev->refcnt > 0) { + mutex_unlock(&dev->dev_mutex); + mutex_unlock(&devices_mutex); + return -EBUSY; + } + + /* Remove from device list */ + list_del(&dev->list); + mutex_unlock(&devices_mutex); + + /* Flush pending work and stop this workqueue */ + destroy_workqueue(dev->wq); + + ubiblock_cleanup(dev); + mutex_unlock(&dev->dev_mutex); + kfree(dev); + return 0; +} + +static void ubiblock_resize(struct ubi_volume_info *vi) +{ + struct ubiblock *dev; + int disk_capacity; + + /* + * Need to lock the device list until we stop using the device, + * otherwise the device struct might get released in 'ubiblock_del()'. + */ + mutex_lock(&devices_mutex); + dev = find_dev_nolock(vi->ubi_num, vi->vol_id); + if (!dev) { + mutex_unlock(&devices_mutex); + return; + } + + mutex_lock(&dev->dev_mutex); + disk_capacity = (vi->size * vi->usable_leb_size) >> 9; + set_capacity(dev->gd, disk_capacity); + ubi_msg("%s resized to %d LEBs", dev->gd->disk_name, vi->size); + mutex_unlock(&dev->dev_mutex); + mutex_unlock(&devices_mutex); +} + +static int ubiblock_notify(struct notifier_block *nb, + unsigned long notification_type, void *ns_ptr) +{ + struct ubi_notification *nt = ns_ptr; + + switch (notification_type) { + case UBI_VOLUME_ADDED: + /* + * We want to enforce explicit block device attaching for + * volumes, so when a volume is added we do nothing. + */ + break; + case UBI_VOLUME_REMOVED: + ubiblock_del(&nt->vi); + break; + case UBI_VOLUME_RESIZED: + ubiblock_resize(&nt->vi); + break; + default: + break; + } + return NOTIFY_OK; +} + +static struct notifier_block ubiblock_notifier = { + .notifier_call = ubiblock_notify, +}; + +static struct ubi_volume_desc * __init +open_volume_desc(const char *name, int ubi_num, int vol_id) +{ + if (ubi_num == -1) + /* No ubi num, name must be a vol device path */ + return ubi_open_volume_path(name, UBI_READONLY); + else if (vol_id == -1) + /* No vol_id, must be vol_name */ + return ubi_open_volume_nm(ubi_num, name, UBI_READONLY); + else + return ubi_open_volume(ubi_num, vol_id, UBI_READONLY); +} + +static int __init ubiblock_attach_from_param(void) +{ + int i, ret; + struct ubiblock_param *p; + struct ubi_volume_desc *desc; + struct ubi_volume_info vi; + + for (i = 0; i < ubiblock_devs; i++) { + p = &ubiblock_param[i]; + + desc = open_volume_desc(p->name, p->ubi_num, p->vol_id); + if (IS_ERR(desc)) { + ubi_err("block: can't open volume, err=%ld\n", + PTR_ERR(desc)); + ret = PTR_ERR(desc); + break; + } + + ubi_get_volume_info(desc, &vi); + ubi_close_volume(desc); + + ret = ubiblock_add(&vi); + if (ret) { + ubi_err("block: can't add '%s' volume, err=%d\n", + vi.name, ret); + break; + } + } + return ret; +} + +static void ubiblock_detach_all(void) +{ + struct ubiblock *next; + struct ubiblock *dev; + + list_for_each_entry_safe(dev, next, &ubiblock_devices, list) { + /* Flush pending work and stop workqueue */ + destroy_workqueue(dev->wq); + /* The module is being forcefully removed */ + WARN_ON(dev->desc); + /* Remove from device list */ + list_del(&dev->list); + ubiblock_cleanup(dev); + kfree(dev); + } +} + +int __init ubiblock_init(void) +{ + int ret; + + ubiblock_major = register_blkdev(0, "ubiblock"); + if (ubiblock_major < 0) + return ubiblock_major; + + /* Attach block devices from 'block=' module param */ + ret = ubiblock_attach_from_param(); + if (ret) + goto err_detach; + + /* + * Block devices needs to be attached to volumes explicitly + * upon user request. So we ignore existing volumes. + */ + ret = ubi_register_volume_notifier(&ubiblock_notifier, 1); + if (ret) + goto err_unreg; + return 0; + +err_unreg: + unregister_blkdev(ubiblock_major, "ubiblock"); +err_detach: + ubiblock_detach_all(); + return ret; +} + +void __exit ubiblock_exit(void) +{ + ubi_unregister_volume_notifier(&ubiblock_notifier); + ubiblock_detach_all(); + unregister_blkdev(ubiblock_major, "ubiblock"); +} diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index 57deae961429..6e30a3c280d0 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -1298,6 +1298,15 @@ static int __init ubi_init(void) } } + err = ubiblock_init(); + if (err) { + ubi_err("block: cannot initialize, error %d", err); + + /* See comment above re-ubi_is_module(). */ + if (ubi_is_module()) + goto out_detach; + } + return 0; out_detach: @@ -1326,6 +1335,8 @@ static void __exit ubi_exit(void) { int i; + ubiblock_exit(); + for (i = 0; i < UBI_MAX_DEVICES; i++) if (ubi_devices[i]) { mutex_lock(&ubi_devices_mutex); diff --git a/drivers/mtd/ubi/cdev.c b/drivers/mtd/ubi/cdev.c index 8ca49f2043e4..39d377489c29 100644 --- a/drivers/mtd/ubi/cdev.c +++ b/drivers/mtd/ubi/cdev.c @@ -561,6 +561,26 @@ static long vol_cdev_ioctl(struct file *file, unsigned int cmd, break; } + /* Attach a block device to an UBI volume */ + case UBI_IOCVOLATTBLK: + { + struct ubi_volume_info vi; + + ubi_get_volume_info(desc, &vi); + err = ubiblock_add(&vi); + break; + } + + /* Dettach a block device from an UBI volume */ + case UBI_IOCVOLDETBLK: + { + struct ubi_volume_info vi; + + ubi_get_volume_info(desc, &vi); + err = ubiblock_del(&vi); + break; + } + default: err = -ENOTTY; break; diff --git a/drivers/mtd/ubi/ubi.h b/drivers/mtd/ubi/ubi.h index 8ea6297a208f..e76ff98440a4 100644 --- a/drivers/mtd/ubi/ubi.h +++ b/drivers/mtd/ubi/ubi.h @@ -864,6 +864,20 @@ int ubi_update_fastmap(struct ubi_device *ubi); int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai, int fm_anchor); +/* block.c */ +#ifdef CONFIG_MTD_UBI_BLOCK +int ubiblock_init(void); +void ubiblock_exit(void); +int ubiblock_add(struct ubi_volume_info *vi); +int ubiblock_del(struct ubi_volume_info *vi); +#else +static inline int ubiblock_init(void) { return 0; } +static inline void ubiblock_exit(void) {} +static inline int ubiblock_add(struct ubi_volume_info *vi) { return -ENOTTY; } +static inline int ubiblock_del(struct ubi_volume_info *vi) { return -ENOTTY; } +#endif + + /* * ubi_rb_for_each_entry - walk an RB-tree. * @rb: a pointer to type 'struct rb_node' to use as a loop counter diff --git a/include/uapi/mtd/ubi-user.h b/include/uapi/mtd/ubi-user.h index 723c324590c1..b98585ad3346 100644 --- a/include/uapi/mtd/ubi-user.h +++ b/include/uapi/mtd/ubi-user.h @@ -134,6 +134,13 @@ * used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be * passed. The object describes which property should be set, and to which value * it should be set. + * + * Block devices on UBI volumes + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * To attach or detach a block device from an UBI volume the %UBI_IOCVOLATTBLK + * and %UBI_IOCVOLDETBLK ioctl commands should be used, respectively. + * These commands take no arguments. */ /* @@ -191,6 +198,10 @@ /* Set an UBI volume property */ #define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \ struct ubi_set_vol_prop_req) +/* Attach a block device to an UBI volume */ +#define UBI_IOCVOLATTBLK _IO(UBI_VOL_IOC_MAGIC, 7) +/* Detach a block device from an UBI volume */ +#define UBI_IOCVOLDETBLK _IO(UBI_VOL_IOC_MAGIC, 8) /* Maximum MTD device name length supported by UBI */ #define MAX_UBI_MTD_NAME_LEN 127