From: Alex Deucher Date: Fri, 7 Jan 2011 02:19:26 +0000 (-0500) Subject: drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9ace9f7b168fef492f731ba60da5c76bc0776e6d;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5 NI chips no longer load the MC ucode in the asic_init sequence so the asic comes up in a basic mode with low engine/memory clocks and a voltage. Once the MC ucode is loaded by the driver the card can be programmed to it's proper default clocks and voltage. As such the default clocks in the firmware info table as the post clocks, not the default running clocks. Track the default post clocks and default running clocks separately to handle this. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 5598f9559a64..8c62b2f58923 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -823,6 +823,9 @@ struct radeon_pm { u32 current_sclk; u32 current_mclk; u32 current_vddc; + u32 default_sclk; + u32 default_mclk; + u32 default_vddc; struct radeon_i2c_chan *i2c_bus; /* selected pm method */ enum radeon_pm_method pm_method; diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 03f1c9a10ba4..1573202a6418 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -2249,15 +2249,22 @@ static void radeon_atombios_parse_pplib_non_clock_info(struct radeon_device *rde rdev->pm.default_power_state_index = state_index; rdev->pm.power_state[state_index].default_clock_mode = &rdev->pm.power_state[state_index].clock_info[mode_index - 1]; - /* patch the table values with the default slck/mclk from firmware info */ - for (j = 0; j < mode_index; j++) { - rdev->pm.power_state[state_index].clock_info[j].mclk = - rdev->clock.default_mclk; - rdev->pm.power_state[state_index].clock_info[j].sclk = - rdev->clock.default_sclk; - if (vddc) - rdev->pm.power_state[state_index].clock_info[j].voltage.voltage = - vddc; + if (ASIC_IS_DCE5(rdev)) { + /* NI chips post without MC ucode, so default clocks are strobe mode only */ + rdev->pm.default_sclk = rdev->pm.power_state[state_index].clock_info[0].sclk; + rdev->pm.default_mclk = rdev->pm.power_state[state_index].clock_info[0].mclk; + rdev->pm.default_vddc = rdev->pm.power_state[state_index].clock_info[0].voltage.voltage; + } else { + /* patch the table values with the default slck/mclk from firmware info */ + for (j = 0; j < mode_index; j++) { + rdev->pm.power_state[state_index].clock_info[j].mclk = + rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[j].sclk = + rdev->clock.default_sclk; + if (vddc) + rdev->pm.power_state[state_index].clock_info[j].voltage.voltage = + vddc; + } } } } diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 7ad2e1a6991d..9052d1e3a5fe 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -167,13 +167,13 @@ static void radeon_set_power_state(struct radeon_device *rdev) if (radeon_gui_idle(rdev)) { sclk = rdev->pm.power_state[rdev->pm.requested_power_state_index]. clock_info[rdev->pm.requested_clock_mode_index].sclk; - if (sclk > rdev->clock.default_sclk) - sclk = rdev->clock.default_sclk; + if (sclk > rdev->pm.default_sclk) + sclk = rdev->pm.default_sclk; mclk = rdev->pm.power_state[rdev->pm.requested_power_state_index]. clock_info[rdev->pm.requested_clock_mode_index].mclk; - if (mclk > rdev->clock.default_mclk) - mclk = rdev->clock.default_mclk; + if (mclk > rdev->pm.default_mclk) + mclk = rdev->pm.default_mclk; /* upvolt before raising clocks, downvolt after lowering clocks */ if (sclk < rdev->pm.current_sclk) @@ -534,8 +534,8 @@ void radeon_pm_resume(struct radeon_device *rdev) mutex_lock(&rdev->pm.mutex); rdev->pm.current_power_state_index = rdev->pm.default_power_state_index; rdev->pm.current_clock_mode_index = 0; - rdev->pm.current_sclk = rdev->clock.default_sclk; - rdev->pm.current_mclk = rdev->clock.default_mclk; + rdev->pm.current_sclk = rdev->pm.default_sclk; + rdev->pm.current_mclk = rdev->pm.default_mclk; rdev->pm.current_vddc = rdev->pm.power_state[rdev->pm.default_power_state_index].clock_info[0].voltage.voltage; if (rdev->pm.pm_method == PM_METHOD_DYNPM && rdev->pm.dynpm_state == DYNPM_STATE_SUSPENDED) { @@ -558,6 +558,8 @@ int radeon_pm_init(struct radeon_device *rdev) rdev->pm.dynpm_planned_action = DYNPM_ACTION_NONE; rdev->pm.dynpm_can_upclock = true; rdev->pm.dynpm_can_downclock = true; + rdev->pm.default_sclk = rdev->clock.default_sclk; + rdev->pm.default_mclk = rdev->clock.default_mclk; rdev->pm.current_sclk = rdev->clock.default_sclk; rdev->pm.current_mclk = rdev->clock.default_mclk; rdev->pm.int_thermal_type = THERMAL_TYPE_NONE; @@ -804,9 +806,9 @@ static int radeon_debugfs_pm_info(struct seq_file *m, void *data) struct drm_device *dev = node->minor->dev; struct radeon_device *rdev = dev->dev_private; - seq_printf(m, "default engine clock: %u0 kHz\n", rdev->clock.default_sclk); + seq_printf(m, "default engine clock: %u0 kHz\n", rdev->pm.default_sclk); seq_printf(m, "current engine clock: %u0 kHz\n", radeon_get_engine_clock(rdev)); - seq_printf(m, "default memory clock: %u0 kHz\n", rdev->clock.default_mclk); + seq_printf(m, "default memory clock: %u0 kHz\n", rdev->pm.default_mclk); if (rdev->asic->get_memory_clock) seq_printf(m, "current memory clock: %u0 kHz\n", radeon_get_memory_clock(rdev)); if (rdev->pm.current_vddc)