From: Eric Bénard Date: Thu, 5 Dec 2013 13:28:06 +0000 (+0100) Subject: ARM: mxs: Add support for the eukrea-cpuimx28. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9a4cc056530d88b25215da155061e5449a9b8f99;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ARM: mxs: Add support for the eukrea-cpuimx28. The following devices/functionalities were tested: * Main UART. * Ethernet0. * Ethernet1. * SD. * USB host. * USB otg. * Display(and its backlight). * Touchscreen. * Audio. * nand. * i2c and the pcf8563 device. * The gpio buttons. * The gpio leds. * Watchdog Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Stephen Warren Cc: Ian Campbell Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Eric Bénard Signed-off-by: Denis Carikli Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 107069dd05d3..c7426e0e1146 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -186,6 +186,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-cfa10057.dtb \ imx28-cfa10058.dtb \ imx28-duckbill.dtb \ + imx28-eukrea-mbmx283lc.dtb \ + imx28-eukrea-mbmx287lc.dtb \ imx28-evk.dtb \ imx28-m28cu3.dtb \ imx28-m28evk.dtb \ diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts new file mode 100644 index 000000000000..7c1572c5a4fb --- /dev/null +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts @@ -0,0 +1,71 @@ +/* + * Copyright 2013 Eukréa Electromatique + * Copyright 2013 Eukréa Electromatique + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Module contains : i.MX282 + 64MB DDR2 + NAND + Ethernet PHY + RTC + */ + +/dts-v1/; +#include "imx28-eukrea-mbmx28lc.dtsi" + +/ { + model = "Eukrea Electromatique MBMX283LC"; + compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; + + memory { + reg = <0x40000000 0x04000000>; + }; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + + +&mac0 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pinctrl{ + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_cpuimx283>; + + hog_pins_cpuimx283: hog-cpuimx283@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_ENET0_RX_CLK__GPIO_4_13 + MX28_PAD_ENET0_TX_CLK__GPIO_4_5 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; +}; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts new file mode 100644 index 000000000000..e773144e1e03 --- /dev/null +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2013 Eukréa Electromatique + * Copyright 2013 Eukréa Electromatique + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/* + * Module contains : i.MX287 + 128MB DDR2 + NAND + 2 x Ethernet PHY + RTC + */ + +#include "imx28-eukrea-mbmx283lc.dts" + +/ { + model = "Eukrea Electromatique MBMX287LC"; + compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; +}; + +&mac1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_cpuimx283 &hog_pins_cpuimx287>; + hog_pins_cpuimx287: hog-cpuimx287@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_SPDIF__GPIO_3_27 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; +}; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi new file mode 100644 index 000000000000..927b391d2058 --- /dev/null +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -0,0 +1,326 @@ +/* + * Copyright 2013 Eukréa Electromatique + * Copyright 2013 Eukréa Electromatique + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include "imx28.dtsi" + +/ { + model = "Eukrea Electromatique MBMX28LC"; + compatible = "eukrea,mbmx28lc", "fsl,imx28"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 4 1000000>; + brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>; + default-brightness-level = <10>; + }; + + button-sw3 { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>; + + sw3 { + label = "SW3"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + }; + + button-sw4 { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>; + + sw4 { + label = "SW4"; + gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + }; + + led-d6 { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_d6_pins_mbmx28lc>; + + led1 { + label = "d6"; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + }; + + led-d7 { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_d7_pins_mbmx28lc>; + + led1 { + label = "d7"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_lcd_3v3: regulator@1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb0_vbus: regulator@2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb1_vbus: regulator@3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx28-mbmx28lc-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "imx28-mbmx28lc-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; +}; + +&duart { + pinctrl-names = "default"; + pinctrl-0 = <&duart_4pins_a>; + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + clocks = <&saif0>; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_18bit_pins_a &lcdif_pins_mbmx28lc>; + lcd-supply = <®_lcd_3v3>; + display = <&display0>; + status = "okay"; + + display0: display0 { + model = "43WVF1G-0"; + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9072000>; + hactive = <480>; + vactive = <272>; + hback-porch = <10>; + hfront-porch = <5>; + vback-porch = <8>; + vfront-porch = <8>; + hsync-len = <40>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&lradc { + fsl,lradc-touchscreen-wires = <4>; + status = "okay"; +}; + +&pinctrl { + gpio_button_sw3_pins_mbmx28lc: gpio-button-sw3-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D21__GPIO_1_21 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + gpio_button_sw4_pins_mbmx28lc: gpio-button-sw4-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D20__GPIO_1_20 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + lcdif_pins_mbmx28lc: lcdif-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_VSYNC__LCD_VSYNC + MX28_PAD_LCD_HSYNC__LCD_HSYNC + MX28_PAD_LCD_DOTCLK__LCD_DOTCLK + MX28_PAD_LCD_ENABLE__LCD_ENABLE + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + led_d6_pins_mbmx28lc: led-d6-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D23__GPIO_1_23 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + led_d7_pins_mbmx28lc: led-d7-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D22__GPIO_1_22 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + reg_lcd_3v3_pins_mbmx28lc: lcd-3v3-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_RESET__GPIO_3_30 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + reg_usb0_vbus_pins_mbmx28lc: reg-usb0-vbus-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D18__GPIO_1_18 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; + + reg_usb1_vbus_pins_mbmx28lc: reg-usb1-vbus-mbmx28lc@0 { + reg = <0>; + fsl,pinmux-ids = < + MX28_PAD_LCD_D19__GPIO_1_19 + >; + fsl,drive-strength = ; + fsl,voltage = ; + fsl,pull-up = ; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; +}; + +&saif0 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; +}; + +&saif1 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; +}; + +&ssp0 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + cd-inverted; + status = "okay"; +}; + +&usb0 { + disable-over-current; + vbus-supply = <®_usb0_vbus>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pins_b>; +}; + +&usb1 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 02b17f7c4b6f..2e7cec86e50e 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -448,6 +448,11 @@ static int __init mxs_restart_init(void) return 0; } +static void __init eukrea_mbmx283lc_init(void) +{ + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); +} + static void __init mxs_machine_init(void) { struct device_node *root; @@ -486,6 +491,8 @@ static void __init mxs_machine_init(void) apx4devkit_init(); else if (of_machine_is_compatible("crystalfontz,cfa10036")) crystalfontz_init(); + else if (of_machine_is_compatible("eukrea,mbmx283lc")) + eukrea_mbmx283lc_init(); else if (of_machine_is_compatible("i2se,duckbill")) duckbill_init(); else if (of_machine_is_compatible("msr,m28cu3"))