From: Rajkumar Manoharan Date: Sun, 15 Mar 2015 15:06:25 +0000 (+0530) Subject: ath10k: move driver state check before setting throttle X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9936fa5908a4bef7fffc0758f0e6307e83103644;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ath10k: move driver state check before setting throttle Since thermal daemon is unaware of the device state, it might try to adjust the throttle state when the device is powered down. So the driver caches the value and will configure it while powering up the target. The cached value will be programed later once the device is brought up. In such case, returning error status is confusing and misleading the user application. Hence moving the driver state check before sending wmi command to target. Reported-by: Matthias Kaehlcke Signed-off-by: Rajkumar Manoharan Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c index 0b4cd3f16ef8..c48c71d99b34 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.c +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -50,7 +50,6 @@ ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, unsigned long throttle_state) { struct ath10k *ar = cdev->devdata; - int ret = 0; if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) { ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n", @@ -59,16 +58,9 @@ ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev, } mutex_lock(&ar->conf_mutex); ar->thermal.throttle_state = throttle_state; - - if (ar->state != ATH10K_STATE_ON) { - ret = -ENETDOWN; - goto out; - } - ath10k_thermal_set_throttling(ar); -out: mutex_unlock(&ar->conf_mutex); - return ret; + return 0; } static struct thermal_cooling_device_ops ath10k_thermal_ops = { @@ -147,6 +139,9 @@ void ath10k_thermal_set_throttling(struct ath10k *ar) lockdep_assert_held(&ar->conf_mutex); + if (ar->state != ATH10K_STATE_ON) + return; + period = ar->thermal.quiet_period; duration = (period * ar->thermal.throttle_state) / 100; enabled = duration ? 1 : 0;