From: Logan Gunthorpe Date: Mon, 22 May 2017 21:52:30 +0000 (-0500) Subject: switchtec: Fix minor bug with partition ID register X-Git-Tag: MMI-PSA29.97-13-9~5419^2~4 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9871e9bb5cf6ff0b51457ca74c270c5c5230b224;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git switchtec: Fix minor bug with partition ID register When a switch endpoint is configured without NTB, the mmio_ntb registers will read all zeros. However, in corner case configurations where the partition ID is not zero and NTB is not enabled, the code will have the wrong partition ID and this causes the driver to use the wrong set of drivers. To fix this we simply take the partition ID from the system info region. Reported-by: Dingbao Chen Signed-off-by: Logan Gunthorpe Signed-off-by: Bjorn Helgaas --- diff --git a/drivers/pci/switch/switchtec.c b/drivers/pci/switch/switchtec.c index abaa227a5f34..f6a63406c76e 100644 --- a/drivers/pci/switch/switchtec.c +++ b/drivers/pci/switch/switchtec.c @@ -1441,12 +1441,15 @@ static int switchtec_init_pci(struct switchtec_dev *stdev, stdev->mmio_sys_info = stdev->mmio + SWITCHTEC_GAS_SYS_INFO_OFFSET; stdev->mmio_flash_info = stdev->mmio + SWITCHTEC_GAS_FLASH_INFO_OFFSET; stdev->mmio_ntb = stdev->mmio + SWITCHTEC_GAS_NTB_OFFSET; - stdev->partition = ioread8(&stdev->mmio_ntb->partition_id); + stdev->partition = ioread8(&stdev->mmio_sys_info->partition_id); stdev->partition_count = ioread8(&stdev->mmio_ntb->partition_count); stdev->mmio_part_cfg_all = stdev->mmio + SWITCHTEC_GAS_PART_CFG_OFFSET; stdev->mmio_part_cfg = &stdev->mmio_part_cfg_all[stdev->partition]; stdev->mmio_pff_csr = stdev->mmio + SWITCHTEC_GAS_PFF_CSR_OFFSET; + if (stdev->partition_count < 1) + stdev->partition_count = 1; + init_pff(stdev); pci_set_drvdata(pdev, stdev);