From: Sjoerd Simons Date: Mon, 25 Jan 2016 10:47:29 +0000 (+0100) Subject: brcmfmac: sdio: Increase the default timeouts a bit X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=97f1a17109272b9f060cbd6d1d5be41528643000;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git brcmfmac: sdio: Increase the default timeouts a bit On a Radxa Rock2 board with a Ampak AP6335 (Broadcom 4339 core) it seems the card responds very quickly most of the time, unfortunately during initialisation it sometimes seems to take just a bit over 2 seconds to respond. This results intialization failing with message like: brcmf_c_preinit_dcmds: Retreiving cur_etheraddr failed, -52 brcmf_bus_start: failed: -52 brcmf_sdio_firmware_callback: dongle is not responding Increasing the timeout to allow for a bit more headroom allows the card to initialize reliably. A quick search online after diagnosing/fixing this showed that Google has a similar patch in their ChromeOS tree, so this doesn't seem specific to the board I'm using. Signed-off-by: Sjoerd Simons Reviewed-by: Julian Calaby Acked-by: Arend van Spriel Reviewed-by: Douglas Anderson Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 80b5d4784645..6776e45b2958 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -45,8 +45,8 @@ #include "chip.h" #include "firmware.h" -#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2000) -#define CTL_DONE_TIMEOUT msecs_to_jiffies(2000) +#define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) +#define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) #ifdef DEBUG