From: Daniel Mack <zonque@gmail.com>
Date: Mon, 24 Jun 2013 14:31:32 +0000 (+0200)
Subject: ASoC: adau1701: add support for pin muxing
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=97d0a868450d08fae0db3f53459852901c6e2f4f;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

ASoC: adau1701: add support for pin muxing

The ADAU1701 has 12 pins that can be configured depending on the system
configuration. Allow settting the corresponding registers from DT.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
---

diff --git a/Documentation/devicetree/bindings/sound/adi,adau1701.txt b/Documentation/devicetree/bindings/sound/adi,adau1701.txt
index a9fbed1be40e..547a49b56a62 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1701.txt
+++ b/Documentation/devicetree/bindings/sound/adi,adau1701.txt
@@ -16,6 +16,10 @@ Optional properties:
 			The state of the pins are set according to the
 			configured clock divider on ASoC side before the
 			firmware is loaded.
+ - adi,pin-config:	An array of 12 numerical values selecting one of the
+			pin configurations as described in the datasheet,
+			table 53. Note that the value of this property has
+			to be prefixed with '/bits/ 8'.
 
 Examples:
 
@@ -25,5 +29,7 @@ Examples:
 			reg = <0x34>;
 			reset-gpio = <&gpio 23 0>;
 			adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
+			adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
+                                                   0x4 0x4 0x4 0x4 0x4 0x4>;
 		};
 	};
diff --git a/sound/soc/codecs/adau1701.c b/sound/soc/codecs/adau1701.c
index 881bab4a65aa..0e250f118c0e 100644
--- a/sound/soc/codecs/adau1701.c
+++ b/sound/soc/codecs/adau1701.c
@@ -29,6 +29,9 @@
 #define ADAU1701_SEROCTL	0x081e
 #define ADAU1701_SERICTL	0x081f
 
+#define ADAU1701_AUXNPOW	0x0822
+#define ADAU1701_PINCONF_0	0x0820
+#define ADAU1701_PINCONF_1	0x0821
 #define ADAU1701_AUXNPOW	0x0822
 
 #define ADAU1701_OSCIPOW	0x0826
@@ -99,6 +102,7 @@ struct adau1701 {
 	unsigned int pll_clkdiv;
 	unsigned int sysclk;
 	struct regmap *regmap;
+	u8 pin_config[12];
 };
 
 static const struct snd_kcontrol_new adau1701_controls[] = {
@@ -134,6 +138,9 @@ static unsigned int adau1701_register_size(struct device *dev,
 		unsigned int reg)
 {
 	switch (reg) {
+	case ADAU1701_PINCONF_0:
+	case ADAU1701_PINCONF_1:
+		return 3;
 	case ADAU1701_DSPCTRL:
 	case ADAU1701_SEROCTL:
 	case ADAU1701_AUXNPOW:
@@ -164,7 +171,7 @@ static int adau1701_reg_write(void *context, unsigned int reg,
 	struct i2c_client *client = context;
 	unsigned int i;
 	unsigned int size;
-	uint8_t buf[4];
+	uint8_t buf[5];
 	int ret;
 
 	size = adau1701_register_size(&client->dev, reg);
@@ -584,7 +591,8 @@ MODULE_DEVICE_TABLE(of, adau1701_dt_ids);
 
 static int adau1701_probe(struct snd_soc_codec *codec)
 {
-	int ret;
+	int i, ret;
+	unsigned int val;
 	struct adau1701 *adau1701 = snd_soc_codec_get_drvdata(codec);
 
 	codec->control_data = to_i2c_client(codec->dev);
@@ -602,6 +610,19 @@ static int adau1701_probe(struct snd_soc_codec *codec)
 	if (ret < 0)
 		return ret;
 
+	/* set up pin config */
+	val = 0;
+	for (i = 0; i < 6; i++)
+		val |= adau1701->pin_config[i] << (i * 4);
+
+	regmap_write(adau1701->regmap, ADAU1701_PINCONF_0, val);
+
+	val = 0;
+	for (i = 0; i < 6; i++)
+		val |= adau1701->pin_config[i + 6] << (i * 4);
+
+	regmap_write(adau1701->regmap, ADAU1701_PINCONF_1, val);
+
 	return 0;
 }
 
@@ -662,6 +683,13 @@ static int adau1701_i2c_probe(struct i2c_client *client,
 						   "adi,pll-mode-gpios", 1);
 		if (gpio_pll_mode[1] < 0 && gpio_pll_mode[1] != -ENOENT)
 			return gpio_pll_mode[1];
+
+		of_property_read_u32(dev->of_node, "adi,pll-clkdiv",
+				     &adau1701->pll_clkdiv);
+
+		of_property_read_u8_array(dev->of_node, "adi,pin-config",
+					  adau1701->pin_config,
+					  ARRAY_SIZE(adau1701->pin_config));
 	}
 
 	if (gpio_is_valid(gpio_nreset)) {