From: Sagar Arun Kamble Date: Tue, 7 Mar 2017 04:52:35 +0000 (+0530) Subject: drm/i915: Initialize pm_intr_keep during intel_irq_init for GuC X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9735b04d0c1b766255e5860c09928b4cd46c092a;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Initialize pm_intr_keep during intel_irq_init for GuC Driver needs to ensure that it doesn't mask the PM interrupts, which are unmasked/needed by GuC firmware. For that, Driver maintains a bitmask of interrupts to be kept unmasked, pm_intr_keep. pm_intr_keep was determined across GuC load. GuC gets loaded in different scenarios and it is not going to change the pm_intr_keep so this patch moves its setup to intel_irq_init. This patch fixes incorrect RPS masking leading to UP interrupts triggered even when at cur_freq=max and inversly for Down interrupts. Cc: Radoslaw Szwichtenberg Cc: Arkadiusz Hiler Cc: Michal Wajdeczko Cc: Michal Winiarski Cc: Daniele Ceraolo Spurio Signed-off-by: Sagar Arun Kamble Reviewed-by: Chris Wilson Signed-off-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1488862355-9768-1-git-send-email-sagar.a.kamble@intel.com --- diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index df95733cf112..22ac70374ac1 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -4301,6 +4301,30 @@ void intel_irq_init(struct drm_i915_private *dev_priv) if (INTEL_INFO(dev_priv)->gen >= 8) dev_priv->rps.pm_intr_keep |= GEN8_PMINTR_REDIRECT_TO_GUC; + /* + * The REDIRECT_TO_GUC bit of the PMINTRMSK register directs all + * (unmasked) PM interrupts to the GuC. All other bits of this + * register *disable* generation of a specific interrupt. + * + * 'pm_intr_keep' indicates bits that are NOT to be set when + * writing to the PM interrupt mask register, i.e. interrupts + * that must not be disabled. + * + * If the GuC is handling these interrupts, then we must not let + * the PM code disable ANY interrupt that the GuC is expecting. + * So for each ENABLED (0) bit in this register, we must SET the + * bit in pm_intr_keep so that it's left enabled for the GuC. + * GuC needs ARAT expired interrupt unmasked hence it is set in + * pm_intr_keep. + * + * Here we CLEAR REDIRECT_TO_GUC bit in pm_intr_keep, which will + * result in the register bit being left SET! + */ + if (HAS_GUC_SCHED(dev_priv)) { + dev_priv->rps.pm_intr_keep |= ARAT_EXPIRED_INTRMSK; + dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_GUC; + } + if (IS_GEN2(dev_priv)) { /* Gen2 doesn't have a hardware frame counter */ dev->max_vblank_count = 0; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index cc843f96576f..19d42e8813c4 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7453,7 +7453,8 @@ enum { #define VLV_RCEDATA _MMIO(0xA0BC) #define GEN6_RC6pp_THRESHOLD _MMIO(0xA0C0) #define GEN6_PMINTRMSK _MMIO(0xA168) -#define GEN8_PMINTR_REDIRECT_TO_GUC (1<<31) +#define GEN8_PMINTR_REDIRECT_TO_GUC (1<<31) +#define ARAT_EXPIRED_INTRMSK (1<<9) #define GEN8_MISC_CTRL0 _MMIO(0xA180) #define VLV_PWRDWNUPCTL _MMIO(0xA294) #define GEN9_MEDIA_PG_IDLE_HYSTERESIS _MMIO(0xA0C4) diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c index 9885f760f2ef..64cdef479d1d 100644 --- a/drivers/gpu/drm/i915/intel_guc_loader.c +++ b/drivers/gpu/drm/i915/intel_guc_loader.c @@ -114,7 +114,6 @@ static void guc_interrupts_capture(struct drm_i915_private *dev_priv) struct intel_engine_cs *engine; enum intel_engine_id id; int irqs; - u32 tmp; /* tell all command streamers to forward interrupts (but not vblank) to GuC */ irqs = _MASKED_BIT_ENABLE(GFX_INTERRUPT_STEERING); @@ -128,31 +127,6 @@ static void guc_interrupts_capture(struct drm_i915_private *dev_priv) I915_WRITE(GUC_BCS_RCS_IER, ~irqs); I915_WRITE(GUC_VCS2_VCS1_IER, ~irqs); I915_WRITE(GUC_WD_VECS_IER, ~irqs); - - /* - * The REDIRECT_TO_GUC bit of the PMINTRMSK register directs all - * (unmasked) PM interrupts to the GuC. All other bits of this - * register *disable* generation of a specific interrupt. - * - * 'pm_intr_keep' indicates bits that are NOT to be set when - * writing to the PM interrupt mask register, i.e. interrupts - * that must not be disabled. - * - * If the GuC is handling these interrupts, then we must not let - * the PM code disable ANY interrupt that the GuC is expecting. - * So for each ENABLED (0) bit in this register, we must SET the - * bit in pm_intr_keep so that it's left enabled for the GuC. - * - * OTOH the REDIRECT_TO_GUC bit is initially SET in pm_intr_keep - * (so interrupts go to the DISPLAY unit at first); but here we - * need to CLEAR that bit, which will result in the register bit - * being left SET! - */ - tmp = I915_READ(GEN6_PMINTRMSK); - if (tmp & GEN8_PMINTR_REDIRECT_TO_GUC) { - dev_priv->rps.pm_intr_keep |= ~tmp; - dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_GUC; - } } static u32 get_gttype(struct drm_i915_private *dev_priv)