From: Dmitry Artamonow Date: Tue, 13 Oct 2009 11:34:54 +0000 (+0400) Subject: mtd: maps: remove obsolete ipaq-flash driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=9729b260ea5ef4b2c5de0643a7b764b408e275b1;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git mtd: maps: remove obsolete ipaq-flash driver This driver seems to be obsolete and broken for a long time. It depends on CONFIG_IPAQ_HANDHELD that simply doesn't exists anywhere in kernel. Also, it seems that none of machines it claims to support have any use of it: SA11xx-based iPAQs (h3100/h3600) use sa1100-flash iPAQ h5000 uses physmap-flash Jornada 720 uses sa1100-flash Jornada 560 and iPAQ h1910 are not in mainline Signed-off-by: Dmitry Artamonow Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 0fc67a2c5783..c7e97cf4c77e 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -361,12 +361,6 @@ config MTD_SA1100 the SA1100 and SA1110, including the Assabet and the Compaq iPAQ. If you have such a board, say 'Y'. -config MTD_IPAQ - tristate "CFI Flash device mapped on Compaq/HP iPAQ" - depends on IPAQ_HANDHELD && MTD_CFI - help - This provides a driver for the on-board flash of the iPAQ. - config MTD_DC21285 tristate "CFI Flash device mapped on DC21285 Footbridge" depends on MTD_CFI && ARCH_FOOTBRIDGE && MTD_COMPLEX_MAPPINGS diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 1d5cf8636723..34f3cddb384b 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o -obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o obj-$(CONFIG_MTD_SC520CDP) += sc520cdp.o obj-$(CONFIG_MTD_NETSC520) += netsc520.o diff --git a/drivers/mtd/maps/ipaq-flash.c b/drivers/mtd/maps/ipaq-flash.c deleted file mode 100644 index 76708e796b70..000000000000 --- a/drivers/mtd/maps/ipaq-flash.c +++ /dev/null @@ -1,460 +0,0 @@ -/* - * Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based) - * - * (C) 2000 Nicolas Pitre - * (C) 2002 Hewlett-Packard Company - * (C) 2003 Christian Pellegrin , : concatenation of multiple flashes - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#ifdef CONFIG_MTD_CONCAT -#include -#endif - -#include -#include -#include - - -#ifndef CONFIG_IPAQ_HANDHELD -#error This is for iPAQ Handhelds only -#endif -#ifdef CONFIG_SA1100_JORNADA56X - -static void jornada56x_set_vpp(struct map_info *map, int vpp) -{ - if (vpp) - GPSR = GPIO_GPIO26; - else - GPCR = GPIO_GPIO26; - GPDR |= GPIO_GPIO26; -} - -#endif - -#ifdef CONFIG_SA1100_JORNADA720 - -static void jornada720_set_vpp(struct map_info *map, int vpp) -{ - if (vpp) - PPSR |= 0x80; - else - PPSR &= ~0x80; - PPDR |= 0x80; -} - -#endif - -#define MAX_IPAQ_CS 2 /* Number of CS we are going to test */ - -#define IPAQ_MAP_INIT(X) \ - { \ - name: "IPAQ flash " X, \ - } - - -static struct map_info ipaq_map[MAX_IPAQ_CS] = { - IPAQ_MAP_INIT("bank 1"), - IPAQ_MAP_INIT("bank 2") -}; - -static struct mtd_info *my_sub_mtd[MAX_IPAQ_CS] = { - NULL, - NULL -}; - -/* - * Here are partition information for all known IPAQ-based devices. - * See include/linux/mtd/partitions.h for definition of the mtd_partition - * structure. - * - * The *_max_flash_size is the maximum possible mapped flash size which - * is not necessarily the actual flash size. It must be no more than - * the value specified in the "struct map_desc *_io_desc" mapping - * definition for the corresponding machine. - * - * Please keep these in alphabetical order, and formatted as per existing - * entries. Thanks. - */ - -#ifdef CONFIG_IPAQ_HANDHELD -static unsigned long h3xxx_max_flash_size = 0x04000000; -static struct mtd_partition h3xxx_partitions[] = { - { - name: "H3XXX boot firmware", -#ifndef CONFIG_LAB - size: 0x00040000, -#else - size: 0x00080000, -#endif - offset: 0, -#ifndef CONFIG_LAB - mask_flags: MTD_WRITEABLE, /* force read-only */ -#endif - }, - { - name: "H3XXX root jffs2", -#ifndef CONFIG_LAB - size: 0x2000000 - 2*0x40000, /* Warning, this is fixed later */ - offset: 0x00040000, -#else - size: 0x2000000 - 0x40000 - 0x80000, /* Warning, this is fixed later */ - offset: 0x00080000, -#endif - }, - { - name: "asset", - size: 0x40000, - offset: 0x2000000 - 0x40000, /* Warning, this is fixed later */ - mask_flags: MTD_WRITEABLE, /* force read-only */ - } -}; - -#ifndef CONFIG_MTD_CONCAT -static struct mtd_partition h3xxx_partitions_bank2[] = { - /* this is used only on 2 CS machines when concat is not present */ - { - name: "second H3XXX root jffs2", - size: 0x1000000 - 0x40000, /* Warning, this is fixed later */ - offset: 0x00000000, - }, - { - name: "second asset", - size: 0x40000, - offset: 0x1000000 - 0x40000, /* Warning, this is fixed later */ - mask_flags: MTD_WRITEABLE, /* force read-only */ - } -}; -#endif - -static DEFINE_SPINLOCK(ipaq_vpp_lock); - -static void h3xxx_set_vpp(struct map_info *map, int vpp) -{ - static int nest = 0; - - spin_lock(&ipaq_vpp_lock); - if (vpp) - nest++; - else - nest--; - if (nest) - assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 1); - else - assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 0); - spin_unlock(&ipaq_vpp_lock); -} - -#endif - -#if defined(CONFIG_SA1100_JORNADA56X) || defined(CONFIG_SA1100_JORNADA720) -static unsigned long jornada_max_flash_size = 0x02000000; -static struct mtd_partition jornada_partitions[] = { - { - name: "Jornada boot firmware", - size: 0x00040000, - offset: 0, - mask_flags: MTD_WRITEABLE, /* force read-only */ - }, { - name: "Jornada root jffs2", - size: MTDPART_SIZ_FULL, - offset: 0x00040000, - } -}; -#endif - - -static struct mtd_partition *parsed_parts; -static struct mtd_info *mymtd; - -static unsigned long cs_phys[] = { -#ifdef CONFIG_ARCH_SA1100 - SA1100_CS0_PHYS, - SA1100_CS1_PHYS, - SA1100_CS2_PHYS, - SA1100_CS3_PHYS, - SA1100_CS4_PHYS, - SA1100_CS5_PHYS, -#else - PXA_CS0_PHYS, - PXA_CS1_PHYS, - PXA_CS2_PHYS, - PXA_CS3_PHYS, - PXA_CS4_PHYS, - PXA_CS5_PHYS, -#endif -}; - -static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; - -static int __init h1900_special_case(void); - -static int __init ipaq_mtd_init(void) -{ - struct mtd_partition *parts = NULL; - int nb_parts = 0; - int parsed_nr_parts = 0; - const char *part_type; - int i; /* used when we have >1 flash chips */ - unsigned long tot_flashsize = 0; /* used when we have >1 flash chips */ - - /* Default flash bankwidth */ - // ipaq_map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4; - - if (machine_is_h1900()) - { - /* For our intents, the h1900 is not a real iPAQ, so we special-case it. */ - return h1900_special_case(); - } - - if (machine_is_h3100() || machine_is_h1900()) - for(i=0; isize); - - /* do we really need this debugging? --joshua 20030703 */ - // printk("my_sub_mtd[%d]=%p\n", i, my_sub_mtd[i]); - my_sub_mtd[i]->owner = THIS_MODULE; - tot_flashsize += my_sub_mtd[i]->size; - } -#ifdef CONFIG_MTD_CONCAT - /* fix the asset location */ -# ifdef CONFIG_LAB - h3xxx_partitions[1].size = tot_flashsize - 0x40000 - 0x80000 /* extra big boot block */; -# else - h3xxx_partitions[1].size = tot_flashsize - 2 * 0x40000; -# endif - h3xxx_partitions[2].offset = tot_flashsize - 0x40000; - /* and concat the devices */ - mymtd = mtd_concat_create(&my_sub_mtd[0], i, - "ipaq"); - if (!mymtd) { - printk("Cannot create iPAQ concat device\n"); - return -ENXIO; - } -#else - mymtd = my_sub_mtd[0]; - - /* - *In the very near future, command line partition parsing - * will use the device name as 'mtd-id' instead of a value - * passed to the parse_cmdline_partitions() routine. Since - * the bootldr says 'ipaq', make sure it continues to work. - */ - mymtd->name = "ipaq"; - - if ((machine_is_h3600())) { -# ifdef CONFIG_LAB - h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x80000; -# else - h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000; -# endif - nb_parts = 2; - } else { -# ifdef CONFIG_LAB - h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000 - 0x80000; /* extra big boot block */ -# else - h3xxx_partitions[1].size = my_sub_mtd[0]->size - 2*0x40000; -# endif - h3xxx_partitions[2].offset = my_sub_mtd[0]->size - 0x40000; - } - - if (my_sub_mtd[1]) { -# ifdef CONFIG_LAB - h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x80000; -# else - h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x40000; -# endif - h3xxx_partitions_bank2[1].offset = my_sub_mtd[1]->size - 0x40000; - } -#endif - } - else { - /* - * Now let's probe for the actual flash. Do it here since - * specific machine settings might have been set above. - */ - printk(KERN_NOTICE "IPAQ flash: probing %d-bit flash bus, window=%lx\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt); - mymtd = do_map_probe("cfi_probe", &ipaq_map[0]); - if (!mymtd) - return -ENXIO; - mymtd->owner = THIS_MODULE; - } - - - /* - * Dynamic partition selection stuff (might override the static ones) - */ - - i = parse_mtd_partitions(mymtd, part_probes, &parsed_parts, 0); - - if (i > 0) { - nb_parts = parsed_nr_parts = i; - parts = parsed_parts; - part_type = "dynamic"; - } - - if (!parts) { - printk(KERN_NOTICE "IPAQ flash: no partition info available, registering whole flash at once\n"); - add_mtd_device(mymtd); -#ifndef CONFIG_MTD_CONCAT - if (my_sub_mtd[1]) - add_mtd_device(my_sub_mtd[1]); -#endif - } else { - printk(KERN_NOTICE "Using %s partition definition\n", part_type); - add_mtd_partitions(mymtd, parts, nb_parts); -#ifndef CONFIG_MTD_CONCAT - if (my_sub_mtd[1]) - add_mtd_partitions(my_sub_mtd[1], h3xxx_partitions_bank2, ARRAY_SIZE(h3xxx_partitions_bank2)); -#endif - } - - return 0; -} - -static void __exit ipaq_mtd_cleanup(void) -{ - int i; - - if (mymtd) { - del_mtd_partitions(mymtd); -#ifndef CONFIG_MTD_CONCAT - if (my_sub_mtd[1]) - del_mtd_partitions(my_sub_mtd[1]); -#endif - map_destroy(mymtd); -#ifdef CONFIG_MTD_CONCAT - for(i=0; i