From: Felipe Balbi <balbi@ti.com>
Date: Tue, 20 Dec 2011 13:37:21 +0000 (+0200)
Subject: usb: dwc3: gadget: move us to Default State after reset
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=961906edb549c95f4cc33e4f3dbfd0fcc364954d;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

usb: dwc3: gadget: move us to Default State after reset

After a bus reset, we should move our state to
Default, in order to be able to re-enumerate again.

I only managed to trigger this problem with g_ether
by removing the cable after a few transfers had been
completed.

Signed-off-by: Felipe Balbi <balbi@ti.com>
---

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 026c53cf1645..cb6870cbc49a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1713,6 +1713,9 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 			dwc3_gadget_disconnect_interrupt(dwc);
 	}
 
+	/* after reset -> Default State */
+	dwc->dev_state = DWC3_DEFAULT_STATE;
+
 	/* Enable PHYs */
 	dwc3_gadget_usb2_phy_power(dwc, true);
 	dwc3_gadget_usb3_phy_power(dwc, true);