From: Tejun Heo Date: Mon, 26 Feb 2007 11:09:02 +0000 (+0900) Subject: pata_jmicron: drop unnecessary device programming in [re]init X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=960627b7adf3645e4969b4bfaf03360caabbe76a;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git pata_jmicron: drop unnecessary device programming in [re]init Channel redirect and AHCI mode enable programmings are done via PCI quirk for both probe and resume paths. Drop duplicate and possibly unsafe device programming from pata_jmicron(). Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 7a635dd326f8..c40d09206e45 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c @@ -202,43 +202,13 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i }; struct ata_port_info *port_info[2] = { &info, &info }; - u32 reg; - /* PATA controller is fn 1, AHCI is fn 0 */ if (id->driver_data != 368 && PCI_FUNC(pdev->devfn) != 1) return -ENODEV; - /* The 365/66 have two PATA channels, redirect the second */ - if (id->driver_data == 365 || id->driver_data == 366) { - pci_read_config_dword(pdev, 0x80, ®); - reg |= (1 << 24); /* IDE1 to PATA IDE secondary */ - pci_write_config_dword(pdev, 0x80, reg); - } - return ata_pci_init_one(pdev, port_info, 2); } -static int jmicron_reinit_one(struct pci_dev *pdev) -{ - u32 reg; - - switch(pdev->device) { - case PCI_DEVICE_ID_JMICRON_JMB368: - break; - case PCI_DEVICE_ID_JMICRON_JMB365: - case PCI_DEVICE_ID_JMICRON_JMB366: - /* Restore mapping or disks swap and boy does it get ugly */ - pci_read_config_dword(pdev, 0x80, ®); - reg |= (1 << 24); /* IDE1 to PATA IDE secondary */ - pci_write_config_dword(pdev, 0x80, reg); - /* Fall through */ - default: - /* Make sure AHCI is turned back on */ - pci_write_config_byte(pdev, 0x41, 0xa1); - } - return ata_pci_device_resume(pdev); -} - static const struct pci_device_id jmicron_pci_tbl[] = { { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361}, { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363}, @@ -255,7 +225,7 @@ static struct pci_driver jmicron_pci_driver = { .probe = jmicron_init_one, .remove = ata_pci_remove_one, .suspend = ata_pci_device_suspend, - .resume = jmicron_reinit_one, + .resume = ata_pci_device_resume, }; static int __init jmicron_init(void)