From: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Date: Sun, 5 Oct 2008 18:16:36 +0000 (-0700)
Subject: Phonet: pipe end-point protocol documentation
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=95430c0b140c31cb9e39f876afe1c0e9947d1aaf;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

Phonet: pipe end-point protocol documentation

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/Documentation/networking/phonet.txt b/Documentation/networking/phonet.txt
index 57d3e59edb13..0e6e592f4f55 100644
--- a/Documentation/networking/phonet.txt
+++ b/Documentation/networking/phonet.txt
@@ -112,6 +112,60 @@ However, connect() and getpeername() are not supported, as they did
 not seem useful with Phonet usages (could be added easily).
 
 
+Phonet Pipe protocol
+--------------------
+
+The Phonet Pipe protocol is a simple sequenced packets protocol
+with end-to-end congestion control. It uses the passive listening
+socket paradigm. The listening socket is bound to an unique free object
+ID. Each listening socket can handle up to 255 simultaneous
+connections, one per accept()'d socket.
+
+  int lfd, cfd;
+
+  lfd = socket(PF_PHONET, SOCK_SEQPACKET, PN_PROTO_PIPE);
+  listen (lfd, INT_MAX);
+
+  /* ... */
+  cfd = accept(lfd, NULL, NULL);
+  for (;;)
+  {
+    char buf[...];
+    ssize_t len = read(cfd, buf, sizeof(buf));
+
+    /* ... */
+
+    write(cfd, msg, msglen);
+  }
+
+Connections are established between two endpoints by a "third party"
+application. This means that both endpoints are passive; so connect()
+is not possible.
+
+WARNING:
+When polling a connected pipe socket for writability, there is an
+intrinsic race condition whereby writability might be lost between the
+polling and the writing system calls. In this case, the socket will
+block until write because possible again, unless non-blocking mode
+becomes enabled.
+
+
+The pipe protocol provides two socket options at the SOL_PNPIPE level:
+
+  PNPIPE_ENCAP accepts one integer value (int) of:
+
+    PNPIPE_ENCAP_NONE: The socket operates normally (default).
+
+    PNPIPE_ENCAP_IP: The socket is used as a backend for a virtual IP
+      interface. This requires CAP_NET_ADMIN capability. GPRS data
+      support on Nokia modems can use this. Note that the socket cannot
+      be reliably poll()'d or read() from while in this mode.
+
+  PNPIPE_IFINDEX is a read-only integer value. It contains the
+    interface index of the network interface created by PNPIPE_ENCAP,
+    or zero if encapsulation is off.
+
+
 Authors
 -------