From: Geert Uytterhoeven Date: Tue, 4 Aug 2015 13:55:16 +0000 (+0200) Subject: ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio node X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=94bdc48d55ca10f90b4a625f0e443197e0013557;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: shmobile: sh73a0 dtsi: Add missing "gpio-ranges" to gpio node If a GPIO driver uses gpiochip_add_pin_range() (which is usually the case for GPIO/PFC combos), the GPIO hogging mechanism configured from DT doesn't work: requesting hog GPIO led1-high (chip sh73a0_pfc, offset 20) failed The actual error code is -517 == -EPROBE_DEFER. The problem is that PFC+GPIO registration is handled in multiple steps: 1. pinctrl_register(), 2. gpiochip_add(), 3. gpiochip_add_pin_range(). Configuration of the hogs is handled in gpiochip_add(): gpiochip_add of_gpiochip_add of_gpiochip_scan_hogs gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request pinctrl_request_gpio pinctrl_get_device_gpio_range However, at this point the GPIO controller hasn't been added to pinctrldev_list yet, so the range can't be found, and the operation fails with -EPROBE_DEFER. To fix this, add a "gpio-ranges" property to the gpio device node, so the ranges are added by of_gpiochip_add_pin_range(), which is called by of_gpiochip_add() before the call to of_gpiochip_scan_hogs(). Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Acked-by: Linus Walleij Signed-off-by: Simon Horman --- diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 11e17c5f26e2..ff7c8f298f30 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -392,6 +392,9 @@ <0xe605801c 0x1c>; gpio-controller; #gpio-cells = <2>; + gpio-ranges = + <&pfc 0 0 119>, <&pfc 128 128 37>, <&pfc 192 192 91>, + <&pfc 288 288 22>; interrupts-extended = <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>,