From: Jacob Keller Date: Tue, 7 Jun 2016 23:08:51 +0000 (-0700) Subject: fm10k: wait for queues to drain if stop_hw() fails once X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=94877768cfaa99f7b3757f29632faa5945f18872;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git fm10k: wait for queues to drain if stop_hw() fails once It turns out that sometimes during a reset the Tx queues will be temporarily stuck longer than .stop_hw() expects. Work around this issue by attempting to .stop_hw() first. If it tails, wait a number of attempts until the Tx queues appear to be drained. After this, attempt stop_hw() again. This ensures that we avoid waiting if we don't need to, such as during the first initialization of a VF, and give the proper amount of time necessary to recover from most situations. It is possible that the hardware is actually stuck. For PFs, this is usually fixed by a datapath reset. Unfortunately the VF cannot request a similar reset for itself. Signed-off-by: Jacob Keller Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h index c8d0817766bf..c4cf08dcf5af 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k.h +++ b/drivers/net/ethernet/intel/fm10k/fm10k.h @@ -458,6 +458,7 @@ __be16 fm10k_tx_encap_offload(struct sk_buff *skb); netdev_tx_t fm10k_xmit_frame_ring(struct sk_buff *skb, struct fm10k_ring *tx_ring); void fm10k_tx_timeout_reset(struct fm10k_intfc *interface); +u64 fm10k_get_tx_pending(struct fm10k_ring *ring); bool fm10k_check_tx_hang(struct fm10k_ring *tx_ring); void fm10k_alloc_rx_buffers(struct fm10k_ring *rx_ring, u16 cleaned_count); diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c index c6a464551577..c85fc98945fa 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c @@ -1128,7 +1128,7 @@ static u64 fm10k_get_tx_completed(struct fm10k_ring *ring) return ring->stats.packets; } -static u64 fm10k_get_tx_pending(struct fm10k_ring *ring) +u64 fm10k_get_tx_pending(struct fm10k_ring *ring) { struct fm10k_intfc *interface = ring->q_vector->interface; struct fm10k_hw *hw = &interface->hw; diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c index 4dfd1284a8de..7c9b20c6b6c1 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -1613,7 +1613,7 @@ void fm10k_down(struct fm10k_intfc *interface) { struct net_device *netdev = interface->netdev; struct fm10k_hw *hw = &interface->hw; - int err; + int err, i = 0, count = 0; /* signal that we are down to the interrupt handler and service task */ if (test_and_set_bit(__FM10K_DOWN, &interface->state)) @@ -1629,9 +1629,6 @@ void fm10k_down(struct fm10k_intfc *interface) /* reset Rx filters */ fm10k_reset_rx_state(interface); - /* allow 10ms for device to quiesce */ - usleep_range(10000, 20000); - /* disable polling routines */ fm10k_napi_disable_all(interface); @@ -1642,11 +1639,46 @@ void fm10k_down(struct fm10k_intfc *interface) while (test_and_set_bit(__FM10K_UPDATING_STATS, &interface->state)) usleep_range(1000, 2000); + /* skip waiting for TX DMA if we lost PCIe link */ + if (FM10K_REMOVED(hw->hw_addr)) + goto skip_tx_dma_drain; + + /* In some rare circumstances it can take a while for Tx queues to + * quiesce and be fully disabled. Attempt to .stop_hw() first, and + * then if we get ERR_REQUESTS_PENDING, go ahead and wait in a loop + * until the Tx queues have emptied, or until a number of retries. If + * we fail to clear within the retry loop, we will issue a warning + * indicating that Tx DMA is probably hung. Note this means we call + * .stop_hw() twice but this shouldn't cause any problems. + */ + err = hw->mac.ops.stop_hw(hw); + if (err != FM10K_ERR_REQUESTS_PENDING) + goto skip_tx_dma_drain; + +#define TX_DMA_DRAIN_RETRIES 25 + for (count = 0; count < TX_DMA_DRAIN_RETRIES; count++) { + usleep_range(10000, 20000); + + /* start checking at the last ring to have pending Tx */ + for (; i < interface->num_tx_queues; i++) + if (fm10k_get_tx_pending(interface->tx_ring[i])) + break; + + /* if all the queues are drained, we can break now */ + if (i == interface->num_tx_queues) + break; + } + + if (count >= TX_DMA_DRAIN_RETRIES) + dev_err(&interface->pdev->dev, + "Tx queues failed to drain after %d tries. Tx DMA is probably hung.\n", + count); +skip_tx_dma_drain: /* Disable DMA engine for Tx/Rx */ err = hw->mac.ops.stop_hw(hw); if (err == FM10K_ERR_REQUESTS_PENDING) - dev_info(&interface->pdev->dev, - "due to pending requests hw was not shut down gracefully\n"); + dev_err(&interface->pdev->dev, + "due to pending requests hw was not shut down gracefully\n"); else if (err) dev_err(&interface->pdev->dev, "stop_hw failed: %d\n", err);