From: David Brownell <david-b@pacbell.net>
Date: Fri, 17 Nov 2006 07:34:58 +0000 (-0800)
Subject: USB: add ehci_hcd.ignore_oc parameter
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=93f1a47c4af34c4ee014b3d2aae70089b3b69f72;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git

USB: add ehci_hcd.ignore_oc parameter

Certain boards seem to like to issue false overcurrent notifications, for
example on ports that don't have anything connected to them.  This looks
like a hardware error, at the level of noise to those ports' overcurrent
input signals (or non-debounced VBUS comparators).  This surfaces to users
as truly massive amounts of syslog spam from khubd (which is appropriate
for real hardware problems, except for the volume from multiple ports).

Using this new "ignore_oc" flag helps such systems work more sanely, by
preventing such indications from getting to khubd (and spam syslog).  The
downside is of course that true overcurrent errors will be masked; they'll
appear as spontaneous disconnects, without the diagnostics that will let
users troubleshoot issues like short circuited cables.

Note that the bulk of these reports seem to be with VIA southbridges, but
I think some were with Intel ones.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9030994aba98..f2ceb5fdbeb7 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -126,6 +126,11 @@ static unsigned park = 0;
 module_param (park, uint, S_IRUGO);
 MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
 
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
 /*-------------------------------------------------------------------------*/
@@ -541,9 +546,10 @@ static int ehci_run (struct usb_hcd *hcd)
 
 	temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
 	ehci_info (ehci,
-		"USB %x.%x started, EHCI %x.%02x, driver %s\n",
+		"USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
 		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
-		temp >> 8, temp & 0xff, DRIVER_VERSION);
+		temp >> 8, temp & 0xff, DRIVER_VERSION,
+		ignore_oc ? ", overcurrent ignored" : "");
 
 	writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
 
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 7c170a29f959..0a56dfa2745d 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -218,6 +218,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci (hcd);
 	u32		temp, status = 0;
+	u32		mask;
 	int		ports, i, retval = 1;
 	unsigned long	flags;
 
@@ -233,6 +234,18 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		retval++;
 	}
 
+	/* Some boards (mostly VIA?) report bogus overcurrent indications,
+	 * causing massive log spam unless we completely ignore them.  It
+	 * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+	 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+	 * PORT_POWER; that's surprising, but maybe within-spec.
+	 */
+	if (!ignore_oc)
+		mask = PORT_CSC | PORT_PEC | PORT_OCC;
+	else
+		mask = PORT_CSC | PORT_PEC;
+	// PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
 	/* no hub change reports (bit 0) for now (power, ...) */
 
 	/* port N changes (bit N)? */
@@ -250,8 +263,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 		}
 		if (!(temp & PORT_CONNECT))
 			ehci->reset_done [i] = 0;
-		if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
-				// PORT_STAT_C_SUSPEND?
+		if ((temp & mask) != 0
 				|| ((temp & PORT_RESUME) != 0
 					&& time_after (jiffies,
 						ehci->reset_done [i]))) {
@@ -418,7 +430,7 @@ static int ehci_hub_control (
 			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
 		if (temp & PORT_PEC)
 			status |= 1 << USB_PORT_FEAT_C_ENABLE;
-		if (temp & PORT_OCC)
+		if ((temp & PORT_OCC) && !ignore_oc)
 			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 
 		/* whoever resumes must GetPortStatus to complete it!! */