From: Alexandre Belloni Date: Tue, 13 Jun 2017 20:24:39 +0000 (+0200) Subject: tty/serial: atmel: make the driver DT only X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=92c8f7c0e109d2fcff607a13dd7c1437d6c9f87a;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git tty/serial: atmel: make the driver DT only Now that AVR32 is gone, platform_data are not used to initialize the driver anymore, remove that path from the driver. Also remove the now unused struct atmel_uart_data. Signed-off-by: Alexandre Belloni Acked-by: Richard Genoud Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index b8d9f8f06b85..7551cab438ff 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1638,72 +1638,56 @@ static void atmel_init_property(struct atmel_uart_port *atmel_port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); - - if (np) { - /* DMA/PDC usage specification */ - if (of_property_read_bool(np, "atmel,use-dma-rx")) { - if (of_property_read_bool(np, "dmas")) { - atmel_port->use_dma_rx = true; - atmel_port->use_pdc_rx = false; - } else { - atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = true; - } + + /* DMA/PDC usage specification */ + if (of_property_read_bool(np, "atmel,use-dma-rx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_rx = true; + atmel_port->use_pdc_rx = false; } else { atmel_port->use_dma_rx = false; - atmel_port->use_pdc_rx = false; + atmel_port->use_pdc_rx = true; } + } else { + atmel_port->use_dma_rx = false; + atmel_port->use_pdc_rx = false; + } - if (of_property_read_bool(np, "atmel,use-dma-tx")) { - if (of_property_read_bool(np, "dmas")) { - atmel_port->use_dma_tx = true; - atmel_port->use_pdc_tx = false; - } else { - atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = true; - } + if (of_property_read_bool(np, "atmel,use-dma-tx")) { + if (of_property_read_bool(np, "dmas")) { + atmel_port->use_dma_tx = true; + atmel_port->use_pdc_tx = false; } else { atmel_port->use_dma_tx = false; - atmel_port->use_pdc_tx = false; + atmel_port->use_pdc_tx = true; } - } else { - atmel_port->use_pdc_rx = pdata->use_dma_rx; - atmel_port->use_pdc_tx = pdata->use_dma_tx; - atmel_port->use_dma_rx = false; atmel_port->use_dma_tx = false; + atmel_port->use_pdc_tx = false; } - } static void atmel_init_rs485(struct uart_port *port, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); - - if (np) { - struct serial_rs485 *rs485conf = &port->rs485; - u32 rs485_delay[2]; - /* rs485 properties */ - if (of_property_read_u32_array(np, "rs485-rts-delay", - rs485_delay, 2) == 0) { - rs485conf->delay_rts_before_send = rs485_delay[0]; - rs485conf->delay_rts_after_send = rs485_delay[1]; - rs485conf->flags = 0; - } - if (of_get_property(np, "rs485-rx-during-tx", NULL)) - rs485conf->flags |= SER_RS485_RX_DURING_TX; + struct serial_rs485 *rs485conf = &port->rs485; + u32 rs485_delay[2]; - if (of_get_property(np, "linux,rs485-enabled-at-boot-time", - NULL)) - rs485conf->flags |= SER_RS485_ENABLED; - } else { - port->rs485 = pdata->rs485; + /* rs485 properties */ + if (of_property_read_u32_array(np, "rs485-rts-delay", + rs485_delay, 2) == 0) { + rs485conf->delay_rts_before_send = rs485_delay[0]; + rs485conf->delay_rts_after_send = rs485_delay[1]; + rs485conf->flags = 0; } + if (of_get_property(np, "rs485-rx-during-tx", NULL)) + rs485conf->flags |= SER_RS485_RX_DURING_TX; + + if (of_get_property(np, "linux,rs485-enabled-at-boot-time", NULL)) + rs485conf->flags |= SER_RS485_ENABLED; } static void atmel_set_ops(struct uart_port *port) @@ -2385,7 +2369,6 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, { int ret; struct uart_port *port = &atmel_port->uart; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); atmel_init_property(atmel_port, pdev); atmel_set_ops(port); @@ -2393,24 +2376,17 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port, atmel_init_rs485(port, pdev); port->iotype = UPIO_MEM; - port->flags = UPF_BOOT_AUTOCONF; + port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; port->ops = &atmel_pops; port->fifosize = 1; port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; port->rs485_config = atmel_config_rs485; + port->membase = NULL; memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring)); - if (pdata && pdata->regs) { - /* Already mapped by setup code */ - port->membase = pdata->regs; - } else { - port->flags |= UPF_IOREMAP; - port->membase = NULL; - } - /* for console, the clock could already be configured */ if (!atmel_port->clk) { atmel_port->clk = clk_get(&pdev->dev, "usart"); @@ -2744,19 +2720,13 @@ static int atmel_serial_probe(struct platform_device *pdev) { struct atmel_uart_port *atmel_port; struct device_node *np = pdev->dev.of_node; - struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev); void *data; int ret = -ENODEV; bool rs485_enabled; BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); - if (np) - ret = of_alias_get_id(np, "serial"); - else - if (pdata) - ret = pdata->num; - + ret = of_alias_get_id(np, "serial"); if (ret < 0) /* port id not found in platform data nor device-tree aliases: * auto-enumerate it */ diff --git a/include/linux/platform_data/atmel.h b/include/linux/platform_data/atmel.h index 3c8825b67298..d36bc8d17e97 100644 --- a/include/linux/platform_data/atmel.h +++ b/include/linux/platform_data/atmel.h @@ -9,7 +9,6 @@ #include #include -#include /* Compact Flash */ struct at91_cf_data { @@ -42,15 +41,6 @@ struct atmel_nand_data { bool need_reset_workaround; }; - /* Serial */ -struct atmel_uart_data { - int num; /* port num */ - short use_dma_tx; /* use transmit DMA? */ - short use_dma_rx; /* use receive DMA? */ - void __iomem *regs; /* virt. base address, if any */ - struct serial_rs485 rs485; /* rs485 settings */ -}; - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void);