From: Yinghai Lu Date: Thu, 7 Feb 2008 23:06:17 +0000 (-0800) Subject: sata_mv: fix loop with last port X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8f71efe25f8718200027b547a3e749ae3300fe60;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git sata_mv: fix loop with last port commit f351b2d638c3cb0b95adde3549b7bfaf3f991dfa sata_mv: Support SoC controllers cause panic: scsi 4:0:0:0: Direct-Access ATA HITACHI HDS7225S V44O PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde:<1>BUG: unable to handle kernel NULL pointer dereference at 000000000000001a IP: [] mv_interrupt+0x21c/0x4cc PGD 0 Oops: 0000 [1] SMP CPU 3 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.24-smp-08636-g0afc2ed-dirty #26 RIP: 0010:[] [] mv_interrupt+0x21c/0x4cc RSP: 0000:ffff8102050bbec8 EFLAGS: 00010297 RAX: 0000000000000008 RBX: 0000000000000000 RCX: 0000000000000003 RDX: 0000000000008000 RSI: 0000000000000286 RDI: ffff8102035180e0 RBP: 0000000000000001 R08: 0000000000000003 R09: ffff8102036613e0 R10: 0000000000000002 R11: ffffffff8061474c R12: ffff8102035bf828 R13: 0000000000000008 R14: ffff81020348ece8 R15: ffffc20002cb2000 FS: 0000000000000000(0000) GS:ffff810405025700(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000000001a CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff810405094000, task ffff8102050b28c0) Stack: 000000010000000c 0002040000220400 0000001100000002 ffff81020348eda8 0000000000000001 ffff8102035f2cc0 0000000000000000 0000000000000000 0000000000000018 0000000000000000 0000000000000000 ffffffff80269ee8 Call Trace: [] ? handle_IRQ_event+0x25/0x53 [] ? handle_fasteoi_irq+0x90/0xc8 [] ? do_IRQ+0xf1/0x15f [] ? default_idle+0x0/0x55 [] ? ret_from_intr+0x0/0xa [] ? lapic_next_event+0x0/0xa [] ? default_idle+0x31/0x55 [] ? default_idle+0x2c/0x55 [] ? default_idle+0x0/0x55 [] ? cpu_idle+0x92/0xb8 Code: 41 14 85 c0 89 44 24 14 0f 84 9d 02 00 00 f7 d0 01 d6 41 89 d5 89 41 14 8b 41 14 89 34 24 e9 7e 02 00 00 49 63 c5 49 8b 5c c6 48 43 1a 80 4c 8b a3 20 37 00 00 0f 85 62 02 00 00 31 c9 41 83 RIP [] mv_interrupt+0x21c/0x4cc RSP CR2: 000000000000001a ---[ end trace 2583b5f7a5350584 ]--- Kernel panic - not syncing: Aiee, killing interrupt handler! last_port already include port0 base. this patch change use last_port directly, and move pp assignment later. Signed-off-by: Yinghai Lu Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 080b8362f8d6..f5333cec2dfa 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1716,14 +1716,16 @@ static void mv_host_intr(struct ata_host *host, u32 relevant, unsigned int hc) VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", hc, relevant, hc_irq_cause); - for (port = port0; port < port0 + last_port; port++) { + for (port = port0; port < last_port; port++) { struct ata_port *ap = host->ports[port]; - struct mv_port_priv *pp = ap->private_data; + struct mv_port_priv *pp; int have_err_bits, hard_port, shift; if ((!ap) || (ap->flags & ATA_FLAG_DISABLED)) continue; + pp = ap->private_data; + shift = port << 1; /* (port * 2) */ if (port >= MV_PORTS_PER_HC) { shift++; /* skip bit 8 in the HC Main IRQ reg */