From: Paul E. McKenney Date: Wed, 8 Feb 2017 22:30:15 +0000 (-0800) Subject: doc: Update stallwarn.txt to make causes more prominent X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8e2a439753b1b708c6aa58249ab3cab8015597b1;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git doc: Update stallwarn.txt to make causes more prominent This commit rearranges the Documentation/RCU/stallwarn.txt file to put the list of issues that can cause RCU CPU stall warnings near the beginning of the document. Signed-off-by: Paul E. McKenney --- diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index e93d04133fe7..96a3d81837e1 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -1,9 +1,102 @@ Using RCU's CPU Stall Detector -The rcu_cpu_stall_suppress module parameter enables RCU's CPU stall -detector, which detects conditions that unduly delay RCU grace periods. -This module parameter enables CPU stall detection by default, but -may be overridden via boot-time parameter or at runtime via sysfs. +This document first discusses what sorts of issues RCU's CPU stall +detector can locate, and then discusses kernel parameters and Kconfig +options that can be used to fine-tune the detector's operation. Finally, +this document explains the stall detector's "splat" format. + + +What Causes RCU CPU Stall Warnings? + +So your kernel printed an RCU CPU stall warning. The next question is +"What caused it?" The following problems can result in RCU CPU stall +warnings: + +o A CPU looping in an RCU read-side critical section. + +o A CPU looping with interrupts disabled. + +o A CPU looping with preemption disabled. This condition can + result in RCU-sched stalls and, if ksoftirqd is in use, RCU-bh + stalls. + +o A CPU looping with bottom halves disabled. This condition can + result in RCU-sched and RCU-bh stalls. + +o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the + kernel without invoking schedule(). Note that cond_resched() + does not necessarily prevent RCU CPU stall warnings. Therefore, + if the looping in the kernel is really expected and desirable + behavior, you might need to replace some of the cond_resched() + calls with calls to cond_resched_rcu_qs(). + +o Booting Linux using a console connection that is too slow to + keep up with the boot-time console-message rate. For example, + a 115Kbaud serial console can be -way- too slow to keep up + with boot-time message rates, and will frequently result in + RCU CPU stall warning messages. Especially if you have added + debug printk()s. + +o Anything that prevents RCU's grace-period kthreads from running. + This can result in the "All QSes seen" console-log message. + This message will include information on when the kthread last + ran and how often it should be expected to run. + +o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might + happen to preempt a low-priority task in the middle of an RCU + read-side critical section. This is especially damaging if + that low-priority task is not permitted to run on any other CPU, + in which case the next RCU grace period can never complete, which + will eventually cause the system to run out of memory and hang. + While the system is in the process of running itself out of + memory, you might see stall-warning messages. + +o A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that + is running at a higher priority than the RCU softirq threads. + This will prevent RCU callbacks from ever being invoked, + and in a CONFIG_PREEMPT_RCU kernel will further prevent + RCU grace periods from ever completing. Either way, the + system will eventually run out of memory and hang. In the + CONFIG_PREEMPT_RCU case, you might see stall-warning + messages. + +o A hardware or software issue shuts off the scheduler-clock + interrupt on a CPU that is not in dyntick-idle mode. This + problem really has happened, and seems to be most likely to + result in RCU CPU stall warnings for CONFIG_NO_HZ_COMMON=n kernels. + +o A bug in the RCU implementation. + +o A hardware failure. This is quite unlikely, but has occurred + at least once in real life. A CPU failed in a running system, + becoming unresponsive, but not causing an immediate crash. + This resulted in a series of RCU CPU stall warnings, eventually + leading the realization that the CPU had failed. + +The RCU, RCU-sched, RCU-bh, and RCU-tasks implementations have CPU stall +warning. Note that SRCU does -not- have CPU stall warnings. Please note +that RCU only detects CPU stalls when there is a grace period in progress. +No grace period, no CPU stall warnings. + +To diagnose the cause of the stall, inspect the stack traces. +The offending function will usually be near the top of the stack. +If you have a series of stall warnings from a single extended stall, +comparing the stack traces can often help determine where the stall +is occurring, which will usually be in the function nearest the top of +that portion of the stack which remains the same from trace to trace. +If you can reliably trigger the stall, ftrace can be quite helpful. + +RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE +and with RCU's event tracing. For information on RCU's event tracing, +see include/trace/events/rcu.h. + + +Fine-Tuning the RCU CPU Stall Detector + +The rcuupdate.rcu_cpu_stall_suppress module parameter disables RCU's +CPU stall detector, which detects conditions that unduly delay RCU grace +periods. This module parameter enables CPU stall detection by default, +but may be overridden via boot-time parameter or at runtime via sysfs. The stall detector's idea of what constitutes "unduly delayed" is controlled by a set of kernel configuration variables and cpp macros: @@ -56,6 +149,9 @@ rcupdate.rcu_task_stall_timeout And continues with the output of sched_show_task() for each task stalling the current RCU-tasks grace period. + +Interpreting RCU's CPU Stall-Detector "Splats" + For non-RCU-tasks flavors of RCU, when a CPU detects that it is stalling, it will print a message similar to the following: @@ -178,89 +274,3 @@ grace period is in flight. It is entirely possible to see stall warnings from normal and from expedited grace periods at about the same time from the same run. - - -What Causes RCU CPU Stall Warnings? - -So your kernel printed an RCU CPU stall warning. The next question is -"What caused it?" The following problems can result in RCU CPU stall -warnings: - -o A CPU looping in an RCU read-side critical section. - -o A CPU looping with interrupts disabled. This condition can - result in RCU-sched and RCU-bh stalls. - -o A CPU looping with preemption disabled. This condition can - result in RCU-sched stalls and, if ksoftirqd is in use, RCU-bh - stalls. - -o A CPU looping with bottom halves disabled. This condition can - result in RCU-sched and RCU-bh stalls. - -o For !CONFIG_PREEMPT kernels, a CPU looping anywhere in the - kernel without invoking schedule(). Note that cond_resched() - does not necessarily prevent RCU CPU stall warnings. Therefore, - if the looping in the kernel is really expected and desirable - behavior, you might need to replace some of the cond_resched() - calls with calls to cond_resched_rcu_qs(). - -o Booting Linux using a console connection that is too slow to - keep up with the boot-time console-message rate. For example, - a 115Kbaud serial console can be -way- too slow to keep up - with boot-time message rates, and will frequently result in - RCU CPU stall warning messages. Especially if you have added - debug printk()s. - -o Anything that prevents RCU's grace-period kthreads from running. - This can result in the "All QSes seen" console-log message. - This message will include information on when the kthread last - ran and how often it should be expected to run. - -o A CPU-bound real-time task in a CONFIG_PREEMPT kernel, which might - happen to preempt a low-priority task in the middle of an RCU - read-side critical section. This is especially damaging if - that low-priority task is not permitted to run on any other CPU, - in which case the next RCU grace period can never complete, which - will eventually cause the system to run out of memory and hang. - While the system is in the process of running itself out of - memory, you might see stall-warning messages. - -o A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that - is running at a higher priority than the RCU softirq threads. - This will prevent RCU callbacks from ever being invoked, - and in a CONFIG_PREEMPT_RCU kernel will further prevent - RCU grace periods from ever completing. Either way, the - system will eventually run out of memory and hang. In the - CONFIG_PREEMPT_RCU case, you might see stall-warning - messages. - -o A hardware or software issue shuts off the scheduler-clock - interrupt on a CPU that is not in dyntick-idle mode. This - problem really has happened, and seems to be most likely to - result in RCU CPU stall warnings for CONFIG_NO_HZ_COMMON=n kernels. - -o A bug in the RCU implementation. - -o A hardware failure. This is quite unlikely, but has occurred - at least once in real life. A CPU failed in a running system, - becoming unresponsive, but not causing an immediate crash. - This resulted in a series of RCU CPU stall warnings, eventually - leading the realization that the CPU had failed. - -The RCU, RCU-sched, RCU-bh, and RCU-tasks implementations have CPU stall -warning. Note that SRCU does -not- have CPU stall warnings. Please note -that RCU only detects CPU stalls when there is a grace period in progress. -No grace period, no CPU stall warnings. - -To diagnose the cause of the stall, inspect the stack traces. -The offending function will usually be near the top of the stack. -If you have a series of stall warnings from a single extended stall, -comparing the stack traces can often help determine where the stall -is occurring, which will usually be in the function nearest the top of -that portion of the stack which remains the same from trace to trace. -If you can reliably trigger the stall, ftrace can be quite helpful. - -RCU bugs can often be debugged with the help of CONFIG_RCU_TRACE -and with RCU's event tracing. For information on RCU's event tracing, -see include/trace/events/rcu.h.