From: Jiang Liu Date: Mon, 9 Jun 2014 08:19:33 +0000 (+0800) Subject: x86, acpi: Reorganize code to avoid forward declaration in boot.c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8d7cdcb9d8f366c0567b66cce0d5ce37d3311aaf;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git x86, acpi: Reorganize code to avoid forward declaration in boot.c Reorganize code to avoid forward declaration in boot.c, no function changes. Signed-off-by: Jiang Liu Cc: Konrad Rzeszutek Wilk Cc: Tony Luck Cc: Joerg Roedel Cc: Paul Gortmaker Cc: Greg Kroah-Hartman Cc: Benjamin Herrenschmidt Cc: Grant Likely Cc: Rafael J. Wysocki Cc: Bjorn Helgaas Cc: Randy Dunlap Cc: Yinghai Lu Cc: Len Brown Cc: Pavel Machek Link: http://lkml.kernel.org/r/1402302011-23642-5-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner --- diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index b41b47021f53..ceb3b36f2b2c 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -345,10 +345,123 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e #endif /*CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_IO_APIC -static void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, - u32 gsi); +#define MP_ISA_BUS 0 + +static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, + u32 gsi) +{ + int ioapic; + int pin; + struct mpc_intsrc mp_irq; + + /* + * Convert 'gsi' to 'ioapic.pin'. + */ + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) + return; + pin = mp_find_ioapic_pin(ioapic, gsi); + + /* + * TBD: This check is for faulty timer entries, where the override + * erroneously sets the trigger to level, resulting in a HUGE + * increase of timer interrupts! + */ + if ((bus_irq == 0) && (trigger == 3)) + trigger = 1; + + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (trigger << 2) | polarity; + mp_irq.srcbus = MP_ISA_BUS; + mp_irq.srcbusirq = bus_irq; /* IRQ */ + mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */ + mp_irq.dstirq = pin; /* INTIN# */ + + mp_save_irq(&mp_irq); + + isa_irq_to_gsi[bus_irq] = gsi; +} + +static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, + int polarity) +{ +#ifdef CONFIG_X86_MPPARSE + struct mpc_intsrc mp_irq; + struct pci_dev *pdev; + unsigned char number; + unsigned int devfn; + int ioapic; + u8 pin; + + if (!acpi_ioapic) + return 0; + if (!dev || !dev_is_pci(dev)) + return 0; + + pdev = to_pci_dev(dev); + number = pdev->bus->number; + devfn = pdev->devfn; + pin = pdev->pin; + /* print the entry should happen on mptable identically */ + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); + mp_irq.srcbus = number; + mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + ioapic = mp_find_ioapic(gsi); + mp_irq.dstapic = mpc_ioapic_id(ioapic); + mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); + + mp_save_irq(&mp_irq); +#endif + return 0; +} + static int mp_register_gsi(struct device *dev, u32 gsi, int trigger, - int polarity); + int polarity) +{ + int ioapic; + int ioapic_pin; + struct io_apic_irq_attr irq_attr; + int ret; + + if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) + return gsi; + + /* Don't set up the ACPI SCI because it's already set up */ + if (acpi_gbl_FADT.sci_interrupt == gsi) + return gsi; + + ioapic = mp_find_ioapic(gsi); + if (ioapic < 0) { + printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); + return gsi; + } + + ioapic_pin = mp_find_ioapic_pin(ioapic, gsi); + + if (ioapic_pin > MP_MAX_IOAPIC_PIN) { + printk(KERN_ERR "Invalid reference to IOAPIC pin " + "%d-%d\n", mpc_ioapic_id(ioapic), + ioapic_pin); + return gsi; + } + + if (enable_update_mptable) + mp_config_acpi_gsi(dev, gsi, trigger, polarity); + + set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, + trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr); + if (ret < 0) + gsi = INT_MIN; + + return gsi; +} + static int __init acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end) @@ -905,44 +1018,6 @@ static int __init acpi_parse_madt_lapic_entries(void) #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_X86_IO_APIC -#define MP_ISA_BUS 0 - -static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, - u32 gsi) -{ - int ioapic; - int pin; - struct mpc_intsrc mp_irq; - - /* - * Convert 'gsi' to 'ioapic.pin'. - */ - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) - return; - pin = mp_find_ioapic_pin(ioapic, gsi); - - /* - * TBD: This check is for faulty timer entries, where the override - * erroneously sets the trigger to level, resulting in a HUGE - * increase of timer interrupts! - */ - if ((bus_irq == 0) && (trigger == 3)) - trigger = 1; - - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = (trigger << 2) | polarity; - mp_irq.srcbus = MP_ISA_BUS; - mp_irq.srcbusirq = bus_irq; /* IRQ */ - mp_irq.dstapic = mpc_ioapic_id(ioapic); /* APIC ID */ - mp_irq.dstirq = pin; /* INTIN# */ - - mp_save_irq(&mp_irq); - - isa_irq_to_gsi[bus_irq] = gsi; -} - static void __init mp_config_acpi_legacy_irqs(void) { int i; @@ -1009,85 +1084,6 @@ static void __init mp_config_acpi_legacy_irqs(void) } } -static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, - int polarity) -{ -#ifdef CONFIG_X86_MPPARSE - struct mpc_intsrc mp_irq; - struct pci_dev *pdev; - unsigned char number; - unsigned int devfn; - int ioapic; - u8 pin; - - if (!acpi_ioapic) - return 0; - if (!dev || !dev_is_pci(dev)) - return 0; - - pdev = to_pci_dev(dev); - number = pdev->bus->number; - devfn = pdev->devfn; - pin = pdev->pin; - /* print the entry should happen on mptable identically */ - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | - (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); - mp_irq.srcbus = number; - mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); - ioapic = mp_find_ioapic(gsi); - mp_irq.dstapic = mpc_ioapic_id(ioapic); - mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); - - mp_save_irq(&mp_irq); -#endif - return 0; -} - -static int mp_register_gsi(struct device *dev, u32 gsi, int trigger, - int polarity) -{ - int ioapic; - int ioapic_pin; - struct io_apic_irq_attr irq_attr; - int ret; - - if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) - return gsi; - - /* Don't set up the ACPI SCI because it's already set up */ - if (acpi_gbl_FADT.sci_interrupt == gsi) - return gsi; - - ioapic = mp_find_ioapic(gsi); - if (ioapic < 0) { - printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi); - return gsi; - } - - ioapic_pin = mp_find_ioapic_pin(ioapic, gsi); - - if (ioapic_pin > MP_MAX_IOAPIC_PIN) { - printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mpc_ioapic_id(ioapic), - ioapic_pin); - return gsi; - } - - if (enable_update_mptable) - mp_config_acpi_gsi(dev, gsi, trigger, polarity); - - set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, - trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr); - if (ret < 0) - gsi = INT_MIN; - - return gsi; -} - /* * Parse IOAPIC related entries in MADT * returns 0 on success, < 0 on error