From: Erez Shitrit Date: Thu, 27 Oct 2016 13:27:17 +0000 (+0300) Subject: net/mlx4_en: Process all completions in RX rings after port goes up X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8d59de8f7bb3;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git net/mlx4_en: Process all completions in RX rings after port goes up Currently there is a race between incoming traffic and initialization flow. HW is able to receive the packets after INIT_PORT is done and unicast steering is configured. Before we set priv->port_up NAPI is not scheduled and receive queues become full. Therefore we never get new interrupts about the completions. This issue could happen if running heavy traffic during bringing port up. The resolution is to schedule NAPI once port_up is set. If receive queues were full this will process all cqes and release them. Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Erez Shitrit Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 7e703bed7b82..e25c11dff525 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -1733,6 +1733,13 @@ int mlx4_en_start_port(struct net_device *dev) udp_tunnel_get_rx_info(dev); priv->port_up = true; + + /* Process all completions if exist to prevent + * the queues freezing if they are full + */ + for (i = 0; i < priv->rx_ring_num; i++) + napi_schedule(&priv->rx_cq[i]->napi); + netif_tx_start_all_queues(dev); netif_device_attach(dev);