From: David Schleef Date: Thu, 19 Feb 2009 18:10:52 +0000 (-0800) Subject: Staging: comedi: add dt282x driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8d3d823c74a4c967b4a02e6466c6727ad21422a0;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git Staging: comedi: add dt282x driver Driver for DataTranslation DT2821 series cards From: David Schleef Cc: Ian Abbott Cc: Frank Mori Hess Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c new file mode 100644 index 000000000000..28eadea2a424 --- /dev/null +++ b/drivers/staging/comedi/drivers/dt282x.c @@ -0,0 +1,1471 @@ +/* + comedi/drivers/dt282x.c + Hardware driver for Data Translation DT2821 series + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1997-8 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ +/* +Driver: dt282x +Description: Data Translation DT2821 series (including DT-EZ) +Author: ds +Devices: [Data Translation] DT2821 (dt2821), + DT2821-F-16SE (dt2821-f), DT2821-F-8DI (dt2821-f), + DT2821-G-16SE (dt2821-f), DT2821-G-8DI (dt2821-g), + DT2823 (dt2823), + DT2824-PGH (dt2824-pgh), DT2824-PGL (dt2824-pgl), DT2825 (dt2825), + DT2827 (dt2827), DT2828 (dt2828), DT21-EZ (dt21-ez), DT23-EZ (dt23-ez), + DT24-EZ (dt24-ez), DT24-EZ-PGL (dt24-ez-pgl) +Status: complete +Updated: Wed, 22 Aug 2001 17:11:34 -0700 + +Configuration options: + [0] - I/O port base address + [1] - IRQ + [2] - DMA 1 + [3] - DMA 2 + [4] - AI jumpered for 0=single ended, 1=differential + [5] - AI jumpered for 0=straight binary, 1=2's complement + [6] - AO 0 jumpered for 0=straight binary, 1=2's complement + [7] - AO 1 jumpered for 0=straight binary, 1=2's complement + [8] - AI jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5] + [9] - AO 0 jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5], + 4=[-2.5,2.5] + [10]- A0 1 jumpered for 0=[-10,10]V, 1=[0,10], 2=[-5,5], 3=[0,5], + 4=[-2.5,2.5] + +Notes: + - AO commands might be broken. + - If you try to run a command on both the AI and AO subdevices + simultaneously, bad things will happen. The driver needs to + be fixed to check for this situation and return an error. +*/ + +#include "../comedidev.h" + +#include +#include +#include +#include "comedi_fc.h" + +#define DEBUG + +#define DT2821_TIMEOUT 100 /* 500 us */ +#define DT2821_SIZE 0x10 + +/* + * Registers in the DT282x + */ + +#define DT2821_ADCSR 0x00 /* A/D Control/Status */ +#define DT2821_CHANCSR 0x02 /* Channel Control/Status */ +#define DT2821_ADDAT 0x04 /* A/D data */ +#define DT2821_DACSR 0x06 /* D/A Control/Status */ +#define DT2821_DADAT 0x08 /* D/A data */ +#define DT2821_DIODAT 0x0a /* digital data */ +#define DT2821_SUPCSR 0x0c /* Supervisor Control/Status */ +#define DT2821_TMRCTR 0x0e /* Timer/Counter */ + +/* + * At power up, some registers are in a well-known state. The + * masks and values are as follows: + */ + +#define DT2821_ADCSR_MASK 0xfff0 +#define DT2821_ADCSR_VAL 0x7c00 + +#define DT2821_CHANCSR_MASK 0xf0f0 +#define DT2821_CHANCSR_VAL 0x70f0 + +#define DT2821_DACSR_MASK 0x7c93 +#define DT2821_DACSR_VAL 0x7c90 + +#define DT2821_SUPCSR_MASK 0xf8ff +#define DT2821_SUPCSR_VAL 0x0000 + +#define DT2821_TMRCTR_MASK 0xff00 +#define DT2821_TMRCTR_VAL 0xf000 + +/* + * Bit fields of each register + */ + +/* ADCSR */ + +#define DT2821_ADERR 0x8000 /* (R) 1 for A/D error */ +#define DT2821_ADCLK 0x0200 /* (R/W) A/D clock enable */ + /* 0x7c00 read as 1's */ +#define DT2821_MUXBUSY 0x0100 /* (R) multiplexer busy */ +#define DT2821_ADDONE 0x0080 /* (R) A/D done */ +#define DT2821_IADDONE 0x0040 /* (R/W) interrupt on A/D done */ + /* 0x0030 gain select */ + /* 0x000f channel select */ + +/* CHANCSR */ + +#define DT2821_LLE 0x8000 /* (R/W) Load List Enable */ + /* 0x7000 read as 1's */ + /* 0x0f00 (R) present address */ + /* 0x00f0 read as 1's */ + /* 0x000f (R) number of entries - 1 */ + +/* DACSR */ + +#define DT2821_DAERR 0x8000 /* (R) D/A error */ +#define DT2821_YSEL 0x0200 /* (R/W) DAC 1 select */ +#define DT2821_SSEL 0x0100 /* (R/W) single channel select */ +#define DT2821_DACRDY 0x0080 /* (R) DAC ready */ +#define DT2821_IDARDY 0x0040 /* (R/W) interrupt on DAC ready */ +#define DT2821_DACLK 0x0020 /* (R/W) D/A clock enable */ +#define DT2821_HBOE 0x0002 /* (R/W) DIO high byte output enable */ +#define DT2821_LBOE 0x0001 /* (R/W) DIO low byte output enable */ + +/* SUPCSR */ + +#define DT2821_DMAD 0x8000 /* (R) DMA done */ +#define DT2821_ERRINTEN 0x4000 /* (R/W) interrupt on error */ +#define DT2821_CLRDMADNE 0x2000 /* (W) clear DMA done */ +#define DT2821_DDMA 0x1000 /* (R/W) dual DMA */ +#define DT2821_DS1 0x0800 /* (R/W) DMA select 1 */ +#define DT2821_DS0 0x0400 /* (R/W) DMA select 0 */ +#define DT2821_BUFFB 0x0200 /* (R/W) buffer B selected */ +#define DT2821_SCDN 0x0100 /* (R) scan done */ +#define DT2821_DACON 0x0080 /* (W) DAC single conversion */ +#define DT2821_ADCINIT 0x0040 /* (W) A/D initialize */ +#define DT2821_DACINIT 0x0020 /* (W) D/A initialize */ +#define DT2821_PRLD 0x0010 /* (W) preload multiplexer */ +#define DT2821_STRIG 0x0008 /* (W) software trigger */ +#define DT2821_XTRIG 0x0004 /* (R/W) external trigger enable */ +#define DT2821_XCLK 0x0002 /* (R/W) external clock enable */ +#define DT2821_BDINIT 0x0001 /* (W) initialize board */ + +static const comedi_lrange range_dt282x_ai_lo_bipolar = { 4, { + RANGE(-10, 10), + RANGE(-5, 5), + RANGE(-2.5, 2.5), + RANGE(-1.25, 1.25) + } +}; +static const comedi_lrange range_dt282x_ai_lo_unipolar = { 4, { + RANGE(0, 10), + RANGE(0, 5), + RANGE(0, 2.5), + RANGE(0, 1.25) + } +}; +static const comedi_lrange range_dt282x_ai_5_bipolar = { 4, { + RANGE(-5, 5), + RANGE(-2.5, 2.5), + RANGE(-1.25, 1.25), + RANGE(-0.625, 0.625), + } +}; +static const comedi_lrange range_dt282x_ai_5_unipolar = { 4, { + RANGE(0, 5), + RANGE(0, 2.5), + RANGE(0, 1.25), + RANGE(0, 0.625), + } +}; +static const comedi_lrange range_dt282x_ai_hi_bipolar = { 4, { + RANGE(-10, 10), + RANGE(-1, 1), + RANGE(-0.1, 0.1), + RANGE(-0.02, 0.02) + } +}; +static const comedi_lrange range_dt282x_ai_hi_unipolar = { 4, { + RANGE(0, 10), + RANGE(0, 1), + RANGE(0, 0.1), + RANGE(0, 0.02) + } +}; + +typedef struct { + const char *name; + int adbits; + int adchan_se; + int adchan_di; + int ai_speed; + int ispgl; + int dachan; + int dabits; +} boardtype_t; + +static const boardtype_t boardtypes[] = { + {name:"dt2821", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:20000, + ispgl: 0, + dachan: 2, + dabits: 12, + }, + {name:"dt2821-f", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:6500, + ispgl: 0, + dachan: 2, + dabits: 12, + }, + {name:"dt2821-g", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:4000, + ispgl: 0, + dachan: 2, + dabits: 12, + }, + {name:"dt2823", + adbits: 16, + adchan_se:0, + adchan_di:4, + ai_speed:10000, + ispgl: 0, + dachan: 2, + dabits: 16, + }, + {name:"dt2824-pgh", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:20000, + ispgl: 0, + dachan: 0, + dabits: 0, + }, + {name:"dt2824-pgl", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:20000, + ispgl: 1, + dachan: 0, + dabits: 0, + }, + {name:"dt2825", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:20000, + ispgl: 1, + dachan: 2, + dabits: 12, + }, + {name:"dt2827", + adbits: 16, + adchan_se:0, + adchan_di:4, + ai_speed:10000, + ispgl: 0, + dachan: 2, + dabits: 12, + }, + {name:"dt2828", + adbits: 12, + adchan_se:4, + adchan_di:0, + ai_speed:10000, + ispgl: 0, + dachan: 2, + dabits: 12, + }, + {name:"dt2829", + adbits: 16, + adchan_se:8, + adchan_di:0, + ai_speed:33250, + ispgl: 0, + dachan: 2, + dabits: 16, + }, + {name:"dt21-ez", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:10000, + ispgl: 0, + dachan: 2, + dabits: 12, + }, + {name:"dt23-ez", + adbits: 16, + adchan_se:16, + adchan_di:8, + ai_speed:10000, + ispgl: 0, + dachan: 0, + dabits: 0, + }, + {name:"dt24-ez", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:10000, + ispgl: 0, + dachan: 0, + dabits: 0, + }, + {name:"dt24-ez-pgl", + adbits: 12, + adchan_se:16, + adchan_di:8, + ai_speed:10000, + ispgl: 1, + dachan: 0, + dabits: 0, + }, +}; + +#define n_boardtypes sizeof(boardtypes)/sizeof(boardtype_t) +#define this_board ((const boardtype_t *)dev->board_ptr) + +typedef struct { + int ad_2scomp; /* we have 2's comp jumper set */ + int da0_2scomp; /* same, for DAC0 */ + int da1_2scomp; /* same, for DAC1 */ + + const comedi_lrange *darangelist[2]; + + sampl_t ao[2]; + + volatile int dacsr; /* software copies of registers */ + volatile int adcsr; + volatile int supcsr; + + volatile int ntrig; + volatile int nread; + + struct { + int chan; + short *buf; /* DMA buffer */ + volatile int size; /* size of current transfer */ + } dma[2]; + int dma_maxsize; /* max size of DMA transfer (in bytes) */ + int usedma; /* driver uses DMA */ + volatile int current_dma_index; + int dma_dir; +} dt282x_private; + +#define devpriv ((dt282x_private *)dev->private) +#define boardtype (*(const boardtype_t *)dev->board_ptr) + +/* + * Some useless abstractions + */ +#define chan_to_DAC(a) ((a)&1) +#define update_dacsr(a) outw(devpriv->dacsr|(a),dev->iobase+DT2821_DACSR) +#define update_adcsr(a) outw(devpriv->adcsr|(a),dev->iobase+DT2821_ADCSR) +#define mux_busy() (inw(dev->iobase+DT2821_ADCSR)&DT2821_MUXBUSY) +#define ad_done() (inw(dev->iobase+DT2821_ADCSR)&DT2821_ADDONE) +#define update_supcsr(a) outw(devpriv->supcsr|(a),dev->iobase+DT2821_SUPCSR) + +/* + * danger! macro abuse... a is the expression to wait on, and b is + * the statement(s) to execute if it doesn't happen. + */ +#define wait_for(a,b) \ + do{ \ + int _i; \ + for(_i=0;_iad_2scomp) { + sign = 1 << (boardtype.adbits - 1); + } else { + sign = 0; + } + + if (nbytes % 2) + comedi_error(dev, "bug! odd number of bytes from dma xfer"); + n = nbytes / 2; + for (i = 0; i < n; i++) { + buf[i] = (buf[i] & mask) ^ sign; + } +} + +static void dt282x_ao_dma_interrupt(comedi_device * dev) +{ + void *ptr; + int size; + int i; + comedi_subdevice *s = dev->subdevices + 1; + + update_supcsr(DT2821_CLRDMADNE); + + if (!s->async->prealloc_buf) { + printk("async->data disappeared. dang!\n"); + return; + } + + i = devpriv->current_dma_index; + ptr = devpriv->dma[i].buf; + + disable_dma(devpriv->dma[i].chan); + + devpriv->current_dma_index = 1 - i; + + size = cfc_read_array_from_buffer(s, ptr, devpriv->dma_maxsize); + if (size == 0) { + rt_printk("dt282x: AO underrun\n"); + dt282x_ao_cancel(dev, s); + s->async->events |= COMEDI_CB_OVERFLOW; + return; + } + prep_ao_dma(dev, i, size); + return; +} + +static void dt282x_ai_dma_interrupt(comedi_device * dev) +{ + void *ptr; + int size; + int i; + int ret; + comedi_subdevice *s = dev->subdevices; + + update_supcsr(DT2821_CLRDMADNE); + + if (!s->async->prealloc_buf) { + printk("async->data disappeared. dang!\n"); + return; + } + + i = devpriv->current_dma_index; + ptr = devpriv->dma[i].buf; + size = devpriv->dma[i].size; + + disable_dma(devpriv->dma[i].chan); + + devpriv->current_dma_index = 1 - i; + + dt282x_munge(dev, ptr, size); + ret = cfc_write_array_to_buffer(s, ptr, size); + if (ret != size) { + dt282x_ai_cancel(dev, s); + return; + } + devpriv->nread -= size / 2; + + if (devpriv->nread < 0) { + printk("dt282x: off by one\n"); + devpriv->nread = 0; + } + if (!devpriv->nread) { + dt282x_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_EOA; + return; + } +#if 0 + /* clear the dual dma flag, making this the last dma segment */ + /* XXX probably wrong */ + if (!devpriv->ntrig) { + devpriv->supcsr &= ~(DT2821_DDMA); + update_supcsr(0); + } +#endif + /* restart the channel */ + prep_ai_dma(dev, i, 0); +} + +static int prep_ai_dma(comedi_device * dev, int dma_index, int n) +{ + int dma_chan; + unsigned long dma_ptr; + unsigned long flags; + + if (!devpriv->ntrig) + return 0; + + if (n == 0) + n = devpriv->dma_maxsize; + if (n > devpriv->ntrig * 2) + n = devpriv->ntrig * 2; + devpriv->ntrig -= n / 2; + + devpriv->dma[dma_index].size = n; + dma_chan = devpriv->dma[dma_index].chan; + dma_ptr = virt_to_bus(devpriv->dma[dma_index].buf); + + set_dma_mode(dma_chan, DMA_MODE_READ); + flags = claim_dma_lock(); + clear_dma_ff(dma_chan); + set_dma_addr(dma_chan, dma_ptr); + set_dma_count(dma_chan, n); + release_dma_lock(flags); + + enable_dma(dma_chan); + + return n; +} + +static int prep_ao_dma(comedi_device * dev, int dma_index, int n) +{ + int dma_chan; + unsigned long dma_ptr; + unsigned long flags; + + devpriv->dma[dma_index].size = n; + dma_chan = devpriv->dma[dma_index].chan; + dma_ptr = virt_to_bus(devpriv->dma[dma_index].buf); + + set_dma_mode(dma_chan, DMA_MODE_WRITE); + flags = claim_dma_lock(); + clear_dma_ff(dma_chan); + set_dma_addr(dma_chan, dma_ptr); + set_dma_count(dma_chan, n); + release_dma_lock(flags); + + enable_dma(dma_chan); + + return n; +} + +static irqreturn_t dt282x_interrupt(int irq, void *d PT_REGS_ARG) +{ + comedi_device *dev = d; + comedi_subdevice *s; + comedi_subdevice *s_ao; + unsigned int supcsr, adcsr, dacsr; + int handled = 0; + + if (!dev->attached) { + comedi_error(dev, "spurious interrupt"); + return IRQ_HANDLED; + } + + s = dev->subdevices + 0; + s_ao = dev->subdevices + 1; + adcsr = inw(dev->iobase + DT2821_ADCSR); + dacsr = inw(dev->iobase + DT2821_DACSR); + supcsr = inw(dev->iobase + DT2821_SUPCSR); + if (supcsr & DT2821_DMAD) { + if (devpriv->dma_dir == DMA_MODE_READ) + dt282x_ai_dma_interrupt(dev); + else + dt282x_ao_dma_interrupt(dev); + handled = 1; + } + if (adcsr & DT2821_ADERR) { + if (devpriv->nread != 0) { + comedi_error(dev, "A/D error"); + dt282x_ai_cancel(dev, s); + s->async->events |= COMEDI_CB_ERROR; + } + handled = 1; + } + if (dacsr & DT2821_DAERR) { +#if 0 + static int warn = 5; + if (--warn <= 0) { + disable_irq(dev->irq); + printk("disabling irq\n"); + } +#endif + comedi_error(dev, "D/A error"); + dt282x_ao_cancel(dev, s_ao); + s->async->events |= COMEDI_CB_ERROR; + handled = 1; + } +#if 0 + if (adcsr & DT2821_ADDONE) { + int ret; + sampl_t data; + + data = (sampl_t) inw(dev->iobase + DT2821_ADDAT); + data &= (1 << boardtype.adbits) - 1; + if (devpriv->ad_2scomp) { + data ^= 1 << (boardtype.adbits - 1); + } + ret = comedi_buf_put(s->async, data); + if (ret == 0) { + s->async->events |= COMEDI_CB_OVERFLOW; + } + + devpriv->nread--; + if (!devpriv->nread) { + s->async->events |= COMEDI_CB_EOA; + } else { + if (supcsr & DT2821_SCDN) + update_supcsr(DT2821_STRIG); + } + handled = 1; + } +#endif + comedi_event(dev, s); + /* printk("adcsr=0x%02x dacsr-0x%02x supcsr=0x%02x\n", adcsr, dacsr, supcsr); */ + return IRQ_RETVAL(handled); +} + +static void dt282x_load_changain(comedi_device * dev, int n, + unsigned int *chanlist) +{ + unsigned int i; + unsigned int chan, range; + + outw(DT2821_LLE | (n - 1), dev->iobase + DT2821_CHANCSR); + for (i = 0; i < n; i++) { + chan = CR_CHAN(chanlist[i]); + range = CR_RANGE(chanlist[i]); + update_adcsr((range << 4) | (chan)); + } + outw(n - 1, dev->iobase + DT2821_CHANCSR); +} + +/* + * Performs a single A/D conversion. + * - Put channel/gain into channel-gain list + * - preload multiplexer + * - trigger conversion and wait for it to finish + */ +static int dt282x_ai_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int i; + + /* XXX should we really be enabling the ad clock here? */ + devpriv->adcsr = DT2821_ADCLK; + update_adcsr(0); + + dt282x_load_changain(dev, 1, &insn->chanspec); + + update_supcsr(DT2821_PRLD); + wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); + return -ETIME; + ); + + for (i = 0; i < insn->n; i++) { + update_supcsr(DT2821_STRIG); + wait_for(ad_done(), comedi_error(dev, "timeout\n"); + return -ETIME; + ); + + data[i] = + inw(dev->iobase + + DT2821_ADDAT) & ((1 << boardtype.adbits) - 1); + if (devpriv->ad_2scomp) + data[i] ^= (1 << (boardtype.adbits - 1)); + } + + return i; +} + +static int dt282x_ai_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_FOLLOW | TRIG_EXT; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_TIMER; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + /* note that mutual compatiblity is not an issue here */ + if (cmd->scan_begin_src != TRIG_FOLLOW && + cmd->scan_begin_src != TRIG_EXT) + err++; + if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + if (cmd->scan_begin_src == TRIG_FOLLOW) { + /* internal trigger */ + if (cmd->scan_begin_arg != 0) { + cmd->scan_begin_arg = 0; + err++; + } + } else { + /* external trigger */ + /* should be level/edge, hi/lo specification here */ + if (cmd->scan_begin_arg != 0) { + cmd->scan_begin_arg = 0; + err++; + } + } + if (cmd->convert_arg < 4000) { + /* XXX board dependent */ + cmd->convert_arg = 4000; + err++; + } +#define SLOWEST_TIMER (250*(1<<15)*255) + if (cmd->convert_arg > SLOWEST_TIMER) { + cmd->convert_arg = SLOWEST_TIMER; + err++; + } + if (cmd->convert_arg < this_board->ai_speed) { + cmd->convert_arg = this_board->ai_speed; + err++; + } + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + if (cmd->stop_src == TRIG_COUNT) { + /* any count is allowed */ + } else { + /* TRIG_NONE */ + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + tmp = cmd->convert_arg; + dt282x_ns_to_timer(&cmd->convert_arg, cmd->flags & TRIG_ROUND_MASK); + if (tmp != cmd->convert_arg) + err++; + + if (err) + return 4; + + return 0; +} + +static int dt282x_ai_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + int timer; + + if (devpriv->usedma == 0) { + comedi_error(dev, + "driver requires 2 dma channels to execute command"); + return -EIO; + } + + dt282x_disable_dma(dev); + + if (cmd->convert_arg < this_board->ai_speed) + cmd->convert_arg = this_board->ai_speed; + timer = dt282x_ns_to_timer(&cmd->convert_arg, TRIG_ROUND_NEAREST); + outw(timer, dev->iobase + DT2821_TMRCTR); + + if (cmd->scan_begin_src == TRIG_FOLLOW) { + /* internal trigger */ + devpriv->supcsr = DT2821_ERRINTEN | DT2821_DS0; + } else { + /* external trigger */ + devpriv->supcsr = DT2821_ERRINTEN | DT2821_DS0 | DT2821_DS1; + } + update_supcsr(DT2821_CLRDMADNE | DT2821_BUFFB | DT2821_ADCINIT); + + devpriv->ntrig = cmd->stop_arg * cmd->scan_end_arg; + devpriv->nread = devpriv->ntrig; + + devpriv->dma_dir = DMA_MODE_READ; + devpriv->current_dma_index = 0; + prep_ai_dma(dev, 0, 0); + if (devpriv->ntrig) { + prep_ai_dma(dev, 1, 0); + devpriv->supcsr |= DT2821_DDMA; + update_supcsr(0); + } + + devpriv->adcsr = 0; + + dt282x_load_changain(dev, cmd->chanlist_len, cmd->chanlist); + + devpriv->adcsr = DT2821_ADCLK | DT2821_IADDONE; + update_adcsr(0); + + update_supcsr(DT2821_PRLD); + wait_for(!mux_busy(), comedi_error(dev, "timeout\n"); + return -ETIME; + ); + + if (cmd->scan_begin_src == TRIG_FOLLOW) { + update_supcsr(DT2821_STRIG); + } else { + devpriv->supcsr |= DT2821_XTRIG; + update_supcsr(0); + } + + return 0; +} + +static void dt282x_disable_dma(comedi_device * dev) +{ + if (devpriv->usedma) { + disable_dma(devpriv->dma[0].chan); + disable_dma(devpriv->dma[1].chan); + } +} + +static int dt282x_ai_cancel(comedi_device * dev, comedi_subdevice * s) +{ + dt282x_disable_dma(dev); + + devpriv->adcsr = 0; + update_adcsr(0); + + devpriv->supcsr = 0; + update_supcsr(DT2821_ADCINIT); + + return 0; +} + +static int dt282x_ns_to_timer(int *nanosec, int round_mode) +{ + int prescale, base, divider; + + for (prescale = 0; prescale < 16; prescale++) { + if (prescale == 1) + continue; + base = 250 * (1 << prescale); + switch (round_mode) { + case TRIG_ROUND_NEAREST: + default: + divider = (*nanosec + base / 2) / base; + break; + case TRIG_ROUND_DOWN: + divider = (*nanosec) / base; + break; + case TRIG_ROUND_UP: + divider = (*nanosec + base - 1) / base; + break; + } + if (divider < 256) { + *nanosec = divider * base; + return (prescale << 8) | (255 - divider); + } + } + base = 250 * (1 << 15); + divider = 255; + *nanosec = divider * base; + return (15 << 8) | (255 - divider); +} + +/* + * Analog output routine. Selects single channel conversion, + * selects correct channel, converts from 2's compliment to + * offset binary if necessary, loads the data into the DAC + * data register, and performs the conversion. + */ +static int dt282x_ao_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + data[0] = devpriv->ao[CR_CHAN(insn->chanspec)]; + + return 1; +} + +static int dt282x_ao_insn_write(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + sampl_t d; + unsigned int chan; + + chan = CR_CHAN(insn->chanspec); + d = data[0]; + d &= (1 << boardtype.dabits) - 1; + devpriv->ao[chan] = d; + + devpriv->dacsr |= DT2821_SSEL; + + if (chan) { + /* select channel */ + devpriv->dacsr |= DT2821_YSEL; + if (devpriv->da0_2scomp) + d ^= (1 << (boardtype.dabits - 1)); + } else { + devpriv->dacsr &= ~DT2821_YSEL; + if (devpriv->da1_2scomp) + d ^= (1 << (boardtype.dabits - 1)); + } + + update_dacsr(0); + + outw(d, dev->iobase + DT2821_DADAT); + + update_supcsr(DT2821_DACON); + + return 1; +} + +static int dt282x_ao_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_INT; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_NOW; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + /* note that mutual compatiblity is not an issue here */ + if (cmd->stop_src != TRIG_COUNT && cmd->stop_src != TRIG_NONE) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + if (cmd->scan_begin_arg < 5000 /* XXX unknown */ ) { + cmd->scan_begin_arg = 5000; + err++; + } + if (cmd->convert_arg != 0) { + cmd->convert_arg = 0; + err++; + } + if (cmd->scan_end_arg > 2) { + /* XXX chanlist stuff? */ + cmd->scan_end_arg = 2; + err++; + } + if (cmd->stop_src == TRIG_COUNT) { + /* any count is allowed */ + } else { + /* TRIG_NONE */ + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + tmp = cmd->scan_begin_arg; + dt282x_ns_to_timer(&cmd->scan_begin_arg, cmd->flags & TRIG_ROUND_MASK); + if (tmp != cmd->scan_begin_arg) + err++; + + if (err) + return 4; + + return 0; + +} + +static int dt282x_ao_inttrig(comedi_device * dev, comedi_subdevice * s, + unsigned int x) +{ + int size; + + if (x != 0) + return -EINVAL; + + size = cfc_read_array_from_buffer(s, devpriv->dma[0].buf, + devpriv->dma_maxsize); + if (size == 0) { + rt_printk("dt282x: AO underrun\n"); + return -EPIPE; + } + prep_ao_dma(dev, 0, size); + + size = cfc_read_array_from_buffer(s, devpriv->dma[1].buf, + devpriv->dma_maxsize); + if (size == 0) { + rt_printk("dt282x: AO underrun\n"); + return -EPIPE; + } + prep_ao_dma(dev, 1, size); + + update_supcsr(DT2821_STRIG); + s->async->inttrig = NULL; + + return 1; +} + +static int dt282x_ao_cmd(comedi_device * dev, comedi_subdevice * s) +{ + int timer; + comedi_cmd *cmd = &s->async->cmd; + + if (devpriv->usedma == 0) { + comedi_error(dev, + "driver requires 2 dma channels to execute command"); + return -EIO; + } + + dt282x_disable_dma(dev); + + devpriv->supcsr = DT2821_ERRINTEN | DT2821_DS1 | DT2821_DDMA; + update_supcsr(DT2821_CLRDMADNE | DT2821_BUFFB | DT2821_DACINIT); + + devpriv->ntrig = cmd->stop_arg * cmd->chanlist_len; + devpriv->nread = devpriv->ntrig; + + devpriv->dma_dir = DMA_MODE_WRITE; + devpriv->current_dma_index = 0; + + timer = dt282x_ns_to_timer(&cmd->scan_begin_arg, TRIG_ROUND_NEAREST); + outw(timer, dev->iobase + DT2821_TMRCTR); + + devpriv->dacsr = DT2821_SSEL | DT2821_DACLK | DT2821_IDARDY; + update_dacsr(0); + + s->async->inttrig = dt282x_ao_inttrig; + + return 0; +} + +static int dt282x_ao_cancel(comedi_device * dev, comedi_subdevice * s) +{ + dt282x_disable_dma(dev); + + devpriv->dacsr = 0; + update_dacsr(0); + + devpriv->supcsr = 0; + update_supcsr(DT2821_DACINIT); + + return 0; +} + +static int dt282x_dio_insn_bits(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + if (data[0]) { + s->state &= ~data[0]; + s->state |= (data[0] & data[1]); + + outw(s->state, dev->iobase + DT2821_DIODAT); + } + data[1] = inw(dev->iobase + DT2821_DIODAT); + + return 2; +} + +static int dt282x_dio_insn_config(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int mask; + + mask = (CR_CHAN(insn->chanspec) < 8) ? 0x00ff : 0xff00; + if (data[0]) + s->io_bits |= mask; + else + s->io_bits &= ~mask; + + if (s->io_bits & 0x00ff) + devpriv->dacsr |= DT2821_LBOE; + else + devpriv->dacsr &= ~DT2821_LBOE; + if (s->io_bits & 0xff00) + devpriv->dacsr |= DT2821_HBOE; + else + devpriv->dacsr &= ~DT2821_HBOE; + + outw(devpriv->dacsr, dev->iobase + DT2821_DACSR); + + return 1; +} + +static const comedi_lrange *const ai_range_table[] = { + &range_dt282x_ai_lo_bipolar, + &range_dt282x_ai_lo_unipolar, + &range_dt282x_ai_5_bipolar, + &range_dt282x_ai_5_unipolar +}; +static const comedi_lrange *const ai_range_pgl_table[] = { + &range_dt282x_ai_hi_bipolar, + &range_dt282x_ai_hi_unipolar +}; +static const comedi_lrange *opt_ai_range_lkup(int ispgl, int x) +{ + if (ispgl) { + if (x < 0 || x >= 2) + x = 0; + return ai_range_pgl_table[x]; + } else { + if (x < 0 || x >= 4) + x = 0; + return ai_range_table[x]; + } +} +static const comedi_lrange *const ao_range_table[] = { + &range_bipolar10, + &range_unipolar10, + &range_bipolar5, + &range_unipolar5, + &range_bipolar2_5 +}; +static const comedi_lrange *opt_ao_range_lkup(int x) +{ + if (x < 0 || x >= 5) + x = 0; + return ao_range_table[x]; +} + +enum { opt_iobase = 0, opt_irq, opt_dma1, opt_dma2, /* i/o base, irq, dma channels */ + opt_diff, /* differential */ + opt_ai_twos, opt_ao0_twos, opt_ao1_twos, /* twos comp */ + opt_ai_range, opt_ao0_range, opt_ao1_range, /* range */ +}; + +/* + options: + 0 i/o base + 1 irq + 2 dma1 + 3 dma2 + 4 0=single ended, 1=differential + 5 ai 0=straight binary, 1=2's comp + 6 ao0 0=straight binary, 1=2's comp + 7 ao1 0=straight binary, 1=2's comp + 8 ai 0=±10 V, 1=0-10 V, 2=±5 V, 3=0-5 V + 9 ao0 0=±10 V, 1=0-10 V, 2=±5 V, 3=0-5 V, 4=±2.5 V + 10 ao1 0=±10 V, 1=0-10 V, 2=±5 V, 3=0-5 V, 4=±2.5 V + */ +static int dt282x_attach(comedi_device * dev, comedi_devconfig * it) +{ + int i, irq; + int ret; + comedi_subdevice *s; + unsigned long iobase; + + dev->board_name = this_board->name; + + iobase = it->options[opt_iobase]; + if (!iobase) + iobase = 0x240; + + printk("comedi%d: dt282x: 0x%04lx", dev->minor, iobase); + if (!request_region(iobase, DT2821_SIZE, "dt282x")) { + printk(" I/O port conflict\n"); + return -EBUSY; + } + dev->iobase = iobase; + + outw(DT2821_BDINIT, dev->iobase + DT2821_SUPCSR); + i = inw(dev->iobase + DT2821_ADCSR); +#ifdef DEBUG + printk(" fingerprint=%x,%x,%x,%x,%x", + inw(dev->iobase + DT2821_ADCSR), + inw(dev->iobase + DT2821_CHANCSR), + inw(dev->iobase + DT2821_DACSR), + inw(dev->iobase + DT2821_SUPCSR), + inw(dev->iobase + DT2821_TMRCTR)); +#endif + + if (((inw(dev->iobase + DT2821_ADCSR) & DT2821_ADCSR_MASK) + != DT2821_ADCSR_VAL) || + ((inw(dev->iobase + DT2821_CHANCSR) & DT2821_CHANCSR_MASK) + != DT2821_CHANCSR_VAL) || + ((inw(dev->iobase + DT2821_DACSR) & DT2821_DACSR_MASK) + != DT2821_DACSR_VAL) || + ((inw(dev->iobase + DT2821_SUPCSR) & DT2821_SUPCSR_MASK) + != DT2821_SUPCSR_VAL) || + ((inw(dev->iobase + DT2821_TMRCTR) & DT2821_TMRCTR_MASK) + != DT2821_TMRCTR_VAL)) { + printk(" board not found"); + return -EIO; + } + /* should do board test */ + + irq = it->options[opt_irq]; +#if 0 + if (irq < 0) { + unsigned long flags; + int irqs; + + save_flags(flags); + sti(); + irqs = probe_irq_on(); + + /* trigger interrupt */ + + comedi_udelay(100); + + irq = probe_irq_off(irqs); + restore_flags(flags); + if (0 /* error */ ) { + printk(" error probing irq (bad)"); + } + } +#endif + if (irq > 0) { + printk(" ( irq = %d )", irq); + ret = comedi_request_irq(irq, dt282x_interrupt, 0, "dt282x", + dev); + if (ret < 0) { + printk(" failed to get irq\n"); + return -EIO; + } + dev->irq = irq; + } else if (irq == 0) { + printk(" (no irq)"); + } else { +#if 0 + printk(" (probe returned multiple irqs--bad)"); +#else + printk(" (irq probe not implemented)"); +#endif + } + + if ((ret = alloc_private(dev, sizeof(dt282x_private))) < 0) + return ret; + + ret = dt282x_grab_dma(dev, it->options[opt_dma1], + it->options[opt_dma2]); + if (ret < 0) + return ret; + + if ((ret = alloc_subdevices(dev, 3)) < 0) + return ret; + + s = dev->subdevices + 0; + + dev->read_subdev = s; + /* ai subdevice */ + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_CMD_READ | + ((it->options[opt_diff]) ? SDF_DIFF : SDF_COMMON); + s->n_chan = + (it->options[opt_diff]) ? boardtype.adchan_di : boardtype. + adchan_se; + s->insn_read = dt282x_ai_insn_read; + s->do_cmdtest = dt282x_ai_cmdtest; + s->do_cmd = dt282x_ai_cmd; + s->cancel = dt282x_ai_cancel; + s->maxdata = (1 << boardtype.adbits) - 1; + s->len_chanlist = 16; + s->range_table = + opt_ai_range_lkup(boardtype.ispgl, it->options[opt_ai_range]); + devpriv->ad_2scomp = it->options[opt_ai_twos]; + + s++; + if ((s->n_chan = boardtype.dachan)) { + /* ao subsystem */ + s->type = COMEDI_SUBD_AO; + dev->write_subdev = s; + s->subdev_flags = SDF_WRITABLE | SDF_CMD_WRITE; + s->insn_read = dt282x_ao_insn_read; + s->insn_write = dt282x_ao_insn_write; + s->do_cmdtest = dt282x_ao_cmdtest; + s->do_cmd = dt282x_ao_cmd; + s->cancel = dt282x_ao_cancel; + s->maxdata = (1 << boardtype.dabits) - 1; + s->len_chanlist = 2; + s->range_table_list = devpriv->darangelist; + devpriv->darangelist[0] = + opt_ao_range_lkup(it->options[opt_ao0_range]); + devpriv->darangelist[1] = + opt_ao_range_lkup(it->options[opt_ao1_range]); + devpriv->da0_2scomp = it->options[opt_ao0_twos]; + devpriv->da1_2scomp = it->options[opt_ao1_twos]; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + s++; + /* dio subsystem */ + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = 16; + s->insn_bits = dt282x_dio_insn_bits; + s->insn_config = dt282x_dio_insn_config; + s->maxdata = 1; + s->range_table = &range_digital; + + printk("\n"); + + return 0; +} + +static void free_resources(comedi_device * dev) +{ + if (dev->irq) { + comedi_free_irq(dev->irq, dev); + } + if (dev->iobase) + release_region(dev->iobase, DT2821_SIZE); + if (dev->private) { + if (devpriv->dma[0].chan) + free_dma(devpriv->dma[0].chan); + if (devpriv->dma[1].chan) + free_dma(devpriv->dma[1].chan); + if (devpriv->dma[0].buf) + free_page((unsigned long)devpriv->dma[0].buf); + if (devpriv->dma[1].buf) + free_page((unsigned long)devpriv->dma[1].buf); + } +} + +static int dt282x_detach(comedi_device * dev) +{ + printk("comedi%d: dt282x: remove\n", dev->minor); + + free_resources(dev); + + return 0; +} + +static int dt282x_grab_dma(comedi_device * dev, int dma1, int dma2) +{ + int ret; + + devpriv->usedma = 0; + + if (!dma1 && !dma2) { + printk(" (no dma)"); + return 0; + } + + if (dma1 == dma2 || dma1 < 5 || dma2 < 5 || dma1 > 7 || dma2 > 7) + return -EINVAL; + + if (dma2 < dma1) { + int i; + i = dma1; + dma1 = dma2; + dma2 = i; + } + + ret = request_dma(dma1, "dt282x A"); + if (ret) + return -EBUSY; + devpriv->dma[0].chan = dma1; + + ret = request_dma(dma2, "dt282x B"); + if (ret) + return -EBUSY; + devpriv->dma[1].chan = dma2; + + devpriv->dma_maxsize = PAGE_SIZE; + devpriv->dma[0].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); + devpriv->dma[1].buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); + if (!devpriv->dma[0].buf || !devpriv->dma[1].buf) { + printk(" can't get DMA memory"); + return -ENOMEM; + } + + printk(" (dma=%d,%d)", dma1, dma2); + + devpriv->usedma = 1; + + return 0; +}