From: Torsten Duwe Date: Thu, 3 Mar 2016 04:27:00 +0000 (+1100) Subject: powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8c50b72a3b4f;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git powerpc/ftrace: Add Kconfig & Make glue for mprofile-kernel Firstly we add logic to Kconfig to allow a user to choose if they want mprofile-kernel. This has to be user-selectable because only some current toolchains support it. If we enabled it unconditionally we would prevent some users from building the kernel entirely. Arguably it would be nice if we could detect if mprofile-kernel was available, and use it then. However that would violate the principle of least surprise because a user having choosen options such as live patching, would then see them quietly disabled at build time. We also make the user selectable option negative, ie. it disables when selected, so that allyesconfig continues to build on old toolchains. Once we've decided we do want to use mprofile-kernel, we then add a script which checks it actually works. That is because there are versions of gcc that accept the flag but don't generate correct code. Due to the way kconfig works, we can't error out when we detect a non-working toolchain. If we did a user would never be able to modify their config and run oldconfig - because the check would block oldconfig from running. Instead we emit a warning and add a bogus flag to CFLAGS so that the build will fail. Signed-off-by: Torsten Duwe Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e4824fd04bb7..91da283cd658 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -94,6 +94,7 @@ config PPC select OF_RESERVED_MEM select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE + select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER select SYSCTL_EXCEPTION_TRACE @@ -373,6 +374,24 @@ config PPC_TRANSACTIONAL_MEM ---help--- Support user-mode Transactional Memory on POWERPC. +config DISABLE_MPROFILE_KERNEL + bool "Disable use of mprofile-kernel for kernel tracing" + depends on PPC64 && CPU_LITTLE_ENDIAN + default y + help + Selecting this options disables use of the mprofile-kernel ABI for + kernel tracing. That will cause options such as live patching + (CONFIG_LIVEPATCH) which depend on CONFIG_DYNAMIC_FTRACE_WITH_REGS to + be disabled also. + + If you have a toolchain which supports mprofile-kernel, then you can + enable this. Otherwise leave it disabled. If you're not sure, say + "N". + +config MPROFILE_KERNEL + depends on PPC64 && CPU_LITTLE_ENDIAN + def_bool !DISABLE_MPROFILE_KERNEL + config IOMMU_HELPER def_bool PPC64 diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 96efd8213c1c..f4e49a4153cb 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -133,6 +133,21 @@ else CFLAGS-$(CONFIG_GENERIC_CPU) += -mcpu=powerpc64 endif +ifdef CONFIG_MPROFILE_KERNEL + ifeq ($(shell $(srctree)/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh $(CC) -I$(srctree)/include -D__KERNEL__),OK) + CC_FLAGS_FTRACE := -pg -mprofile-kernel + KBUILD_CPPFLAGS += -DCC_USING_MPROFILE_KERNEL + else + # If the user asked for mprofile-kernel but the toolchain doesn't + # support it, emit a warning and deliberately break the build later + # with mprofile-kernel-not-supported. We would prefer to make this an + # error right here, but then the user would never be able to run + # oldconfig to change their configuration. + $(warning Compiler does not support mprofile-kernel, set CONFIG_DISABLE_MPROFILE_KERNEL) + CC_FLAGS_FTRACE := -mprofile-kernel-not-supported + endif +endif + CFLAGS-$(CONFIG_CELL_CPU) += $(call cc-option,-mcpu=cell) CFLAGS-$(CONFIG_POWER4_CPU) += $(call cc-option,-mcpu=power4) CFLAGS-$(CONFIG_POWER5_CPU) += $(call cc-option,-mcpu=power5) diff --git a/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh new file mode 100755 index 000000000000..c658d8cf760b --- /dev/null +++ b/arch/powerpc/scripts/gcc-check-mprofile-kernel.sh @@ -0,0 +1,23 @@ +#!/bin/bash + +set -e +set -o pipefail + +# To debug, uncomment the following line +# set -x + +# Test whether the compile option -mprofile-kernel exists and generates +# profiling code (ie. a call to _mcount()). +echo "int func() { return 0; }" | \ + $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \ + grep -q "_mcount" + +# Test whether the notrace attribute correctly suppresses calls to _mcount(). + +echo -e "#include \nnotrace int func() { return 0; }" | \ + $* -S -x c -O2 -p -mprofile-kernel - -o - 2> /dev/null | \ + grep -q "_mcount" && \ + exit 1 + +echo "OK" +exit 0