From: Ezequiel Garcia Date: Wed, 8 Apr 2015 17:03:16 +0000 (-0700) Subject: spi: img-spfi: Control CS lines with GPIO X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8c2c8c03cdcb9b0a75b5585e611715fdd8096c38;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git spi: img-spfi: Control CS lines with GPIO When the CONTINUE bit is set, the interrupt status we are polling to identify if a transaction has finished can be sporadic. Even though the transfer has finished, the interrupt status may erroneously indicate that there is still data in the FIFO. This behaviour causes random timeouts in large PIO transfers. Instead of using the CONTINUE bit to control the CS lines, use the SPI core's CS GPIO handling. Also, now that the CONTINUE bit is not being used, we can poll for the ALLDONE interrupt to indicate transfer completion. Signed-off-by: Sifan Naeem Signed-off-by: Ezequiel Garcia Signed-off-by: Andrew Bresticker Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt index c7dd50fb8eb2..e02fbf18c82c 100644 --- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt +++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt @@ -14,6 +14,7 @@ Required properties: - dma-names: Must include the following entries: - rx - tx +- cs-gpios: Must specify the GPIOs used for chipselect lines. - #address-cells: Must be 1. - #size-cells: Must be 0. diff --git a/drivers/spi/spi-img-spfi.c b/drivers/spi/spi-img-spfi.c index dedb7d880ccc..788e2b176a4f 100644 --- a/drivers/spi/spi-img-spfi.c +++ b/drivers/spi/spi-img-spfi.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -122,35 +123,31 @@ static inline void spfi_start(struct img_spfi *spfi) spfi_writel(spfi, val, SPFI_CONTROL); } -static inline void spfi_stop(struct img_spfi *spfi) -{ - u32 val; - - val = spfi_readl(spfi, SPFI_CONTROL); - val &= ~SPFI_CONTROL_SPFI_EN; - spfi_writel(spfi, val, SPFI_CONTROL); -} - static inline void spfi_reset(struct img_spfi *spfi) { spfi_writel(spfi, SPFI_CONTROL_SOFT_RESET, SPFI_CONTROL); spfi_writel(spfi, 0, SPFI_CONTROL); } -static void spfi_flush_tx_fifo(struct img_spfi *spfi) +static int spfi_wait_all_done(struct img_spfi *spfi) { - unsigned long timeout = jiffies + msecs_to_jiffies(10); + unsigned long timeout = jiffies + msecs_to_jiffies(50); - spfi_writel(spfi, SPFI_INTERRUPT_SDE, SPFI_INTERRUPT_CLEAR); while (time_before(jiffies, timeout)) { - if (spfi_readl(spfi, SPFI_INTERRUPT_STATUS) & - SPFI_INTERRUPT_SDE) - return; + u32 status = spfi_readl(spfi, SPFI_INTERRUPT_STATUS); + + if (status & SPFI_INTERRUPT_ALLDONETRIG) { + spfi_writel(spfi, SPFI_INTERRUPT_ALLDONETRIG, + SPFI_INTERRUPT_CLEAR); + return 0; + } cpu_relax(); } - dev_err(spfi->dev, "Timed out waiting for FIFO to drain\n"); + dev_err(spfi->dev, "Timed out waiting for transaction to complete\n"); spfi_reset(spfi); + + return -ETIMEDOUT; } static unsigned int spfi_pio_write32(struct img_spfi *spfi, const u32 *buf, @@ -236,6 +233,7 @@ static int img_spfi_start_pio(struct spi_master *master, const void *tx_buf = xfer->tx_buf; void *rx_buf = xfer->rx_buf; unsigned long timeout; + int ret; if (tx_buf) tx_bytes = xfer->len; @@ -268,15 +266,15 @@ static int img_spfi_start_pio(struct spi_master *master, cpu_relax(); } + ret = spfi_wait_all_done(spfi); + if (ret < 0) + return ret; + if (rx_bytes > 0 || tx_bytes > 0) { dev_err(spfi->dev, "PIO transfer timed out\n"); return -ETIMEDOUT; } - if (tx_buf) - spfi_flush_tx_fifo(spfi); - spfi_stop(spfi); - return 0; } @@ -285,14 +283,12 @@ static void img_spfi_dma_rx_cb(void *data) struct img_spfi *spfi = data; unsigned long flags; - spin_lock_irqsave(&spfi->lock, flags); + spfi_wait_all_done(spfi); + spin_lock_irqsave(&spfi->lock, flags); spfi->rx_dma_busy = false; - if (!spfi->tx_dma_busy) { - spfi_stop(spfi); + if (!spfi->tx_dma_busy) spi_finalize_current_transfer(spfi->master); - } - spin_unlock_irqrestore(&spfi->lock, flags); } @@ -301,16 +297,12 @@ static void img_spfi_dma_tx_cb(void *data) struct img_spfi *spfi = data; unsigned long flags; - spfi_flush_tx_fifo(spfi); + spfi_wait_all_done(spfi); spin_lock_irqsave(&spfi->lock, flags); - spfi->tx_dma_busy = false; - if (!spfi->rx_dma_busy) { - spfi_stop(spfi); + if (!spfi->rx_dma_busy) spi_finalize_current_transfer(spfi->master); - } - spin_unlock_irqrestore(&spfi->lock, flags); } @@ -445,6 +437,25 @@ static int img_spfi_unprepare(struct spi_master *master, return 0; } +static int img_spfi_setup(struct spi_device *spi) +{ + int ret; + + ret = gpio_request_one(spi->cs_gpio, (spi->mode & SPI_CS_HIGH) ? + GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, + dev_name(&spi->dev)); + if (ret) + dev_err(&spi->dev, "can't request chipselect gpio %d\n", + spi->cs_gpio); + + return ret; +} + +static void img_spfi_cleanup(struct spi_device *spi) +{ + gpio_free(spi->cs_gpio); +} + static void img_spfi_config(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { @@ -480,10 +491,6 @@ static void img_spfi_config(struct spi_master *master, struct spi_device *spi, else if (xfer->tx_nbits == SPI_NBITS_QUAD && xfer->rx_nbits == SPI_NBITS_QUAD) val |= SPFI_CONTROL_TMODE_QUAD << SPFI_CONTROL_TMODE_SHIFT; - val &= ~SPFI_CONTROL_CONTINUE; - if (!xfer->cs_change && !list_is_last(&xfer->transfer_list, - &master->cur_msg->transfers)) - val |= SPFI_CONTROL_CONTINUE; spfi_writel(spfi, val, SPFI_CONTROL); } @@ -510,17 +517,6 @@ static int img_spfi_transfer_one(struct spi_master *master, return ret; } -static void img_spfi_set_cs(struct spi_device *spi, bool enable) -{ - struct img_spfi *spfi = spi_master_get_devdata(spi->master); - u32 val; - - val = spfi_readl(spfi, SPFI_PORT_STATE); - val &= ~(SPFI_PORT_STATE_DEV_SEL_MASK << SPFI_PORT_STATE_DEV_SEL_SHIFT); - val |= spi->chip_select << SPFI_PORT_STATE_DEV_SEL_SHIFT; - spfi_writel(spfi, val, SPFI_PORT_STATE); -} - static bool img_spfi_can_dma(struct spi_master *master, struct spi_device *spi, struct spi_transfer *xfer) { @@ -609,13 +605,13 @@ static int img_spfi_probe(struct platform_device *pdev) master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_TX_DUAL | SPI_RX_DUAL; if (of_property_read_bool(spfi->dev->of_node, "img,supports-quad-mode")) master->mode_bits |= SPI_TX_QUAD | SPI_RX_QUAD; - master->num_chipselect = 5; master->dev.of_node = pdev->dev.of_node; master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(8); master->max_speed_hz = clk_get_rate(spfi->spfi_clk) / 4; master->min_speed_hz = clk_get_rate(spfi->spfi_clk) / 512; - master->set_cs = img_spfi_set_cs; + master->setup = img_spfi_setup; + master->cleanup = img_spfi_cleanup; master->transfer_one = img_spfi_transfer_one; master->prepare_message = img_spfi_prepare; master->unprepare_message = img_spfi_unprepare;