From: Patrick Bruenn Date: Wed, 25 Jan 2017 05:25:48 +0000 (+0100) Subject: ARM: dts: imx53-qsb-common: fix FEC pinmux config X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8b649e426336d7d4800ff9c82858328f4215ba01;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: dts: imx53-qsb-common: fix FEC pinmux config The pinmux configuration in device tree was different from manual muxing in /board/freescale/mx53loco/mx53loco.c All pins were configured as NO_PAD_CTL(1 << 31), which was fine as the bootloader already did the correct pinmuxing for us. But recently u-boot is migrating to reuse device tree files from the kernel tree, so it seems to be better to have the correct pinmuxing in our files, too. Signed-off-by: Patrick Bruenn Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index c05e7cfd0cbc..40b3e31935d0 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -215,16 +215,16 @@ pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x80000000 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000 - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000 + MX53_PAD_FEC_MDC__FEC_MDC 0x4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 >; };