From: Mark Brown Date: Mon, 15 Mar 2010 18:25:26 +0000 (+0000) Subject: ASoC: Add WM8903 interrupt support X-Git-Tag: MMI-PSA29.97-13-9~23168^2~7^2~101 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8abd16a65d81756706016720e2cc7eeb81d06a2e;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git ASoC: Add WM8903 interrupt support Currently used to detect completion of the write sequencer. Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- diff --git a/include/sound/wm8903.h b/include/sound/wm8903.h index 22b66a76febd..49bb1a844bfc 100644 --- a/include/sound/wm8903.h +++ b/include/sound/wm8903.h @@ -232,6 +232,8 @@ #define WM8903_GP5_DB_WIDTH 1 /* GP5_DB */ struct wm8903_platform_data { + bool irq_active_low; /* Set if IRQ active low, default high */ + /* Default register value for R6 (Mic bias), used to configure * microphone detection. In conjunction with gpio_cfg this * can be used to route the microphone status signals out onto diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 467e6c335c5a..7aa2adbe6fba 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -12,12 +12,12 @@ * TODO: * - TDM mode configuration. * - Digital microphone support. - * - Interrupt support (mic detect and sequencer). */ #include #include #include +#include #include #include #include @@ -29,6 +29,7 @@ #include #include #include +#include #include "wm8903.h" @@ -220,6 +221,8 @@ struct wm8903_priv { int playback_active; int capture_active; + struct completion wseq; + struct snd_pcm_substream *master_substream; struct snd_pcm_substream *slave_substream; }; @@ -242,6 +245,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start) { u16 reg[5]; struct i2c_client *i2c = codec->control_data; + struct wm8903_priv *wm8903 = codec->private_data; BUG_ON(start > 48); @@ -256,11 +260,11 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start) start | WM8903_WSEQ_START); /* Wait for it to complete. If we have the interrupt wired up then - * we could block waiting for an interrupt, though polling may still - * be desirable for diagnostic purposes. + * that will break us out of the poll early. */ do { - msleep(10); + wait_for_completion_timeout(&wm8903->wseq, + msecs_to_jiffies(10)); reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4); } while (reg[4] & WM8903_WSEQ_BUSY); @@ -1433,6 +1437,22 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream, return 0; } +static irqreturn_t wm8903_irq(int irq, void *data) +{ + struct wm8903_priv *wm8903 = data; + struct snd_soc_codec *codec = &wm8903->codec; + int reg; + + reg = snd_soc_read(codec, WM8903_INTERRUPT_STATUS_1); + + if (reg & WM8903_WSEQ_BUSY_EINT) { + dev_dbg(codec->dev, "Write sequencer done\n"); + complete(&wm8903->wseq); + } + + return IRQ_HANDLED; +} + #define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\ SNDRV_PCM_RATE_11025 | \ SNDRV_PCM_RATE_16000 | \ @@ -1527,9 +1547,11 @@ static struct snd_soc_codec *wm8903_codec; static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { + struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev); struct wm8903_priv *wm8903; struct snd_soc_codec *codec; int ret, i; + int trigger, irq_pol; u16 val; wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL); @@ -1553,6 +1575,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, codec->reg_cache = &wm8903->reg_cache[0]; codec->private_data = wm8903; codec->volatile_register = wm8903_volatile_register; + init_completion(&wm8903->wseq); i2c_set_clientdata(i2c, codec); codec->control_data = i2c; @@ -1596,6 +1619,32 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, wm8903->mic_delay = pdata->micdet_delay; } + + if (i2c->irq) { + if (pdata && pdata->irq_active_low) { + trigger = IRQF_TRIGGER_LOW; + irq_pol = WM8903_IRQ_POL; + } else { + trigger = IRQF_TRIGGER_HIGH; + irq_pol = 0; + } + + snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL, + WM8903_IRQ_POL, irq_pol); + + ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq, + trigger | IRQF_ONESHOT, + "wm8903", wm8903); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to request IRQ: %d\n", + ret); + goto err; + } + + /* Enable write sequencer interrupts */ + snd_soc_update_bits(codec, WM8903_INTERRUPT_STATUS_1_MASK, + WM8903_IM_WSEQ_BUSY_EINT, 0); + } /* power on device */ wm8903_set_bias_level(codec, SND_SOC_BIAS_STANDBY); @@ -1637,7 +1686,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, ret = snd_soc_register_codec(codec); if (ret != 0) { dev_err(&i2c->dev, "Failed to register codec: %d\n", ret); - goto err; + goto err_irq; } ret = snd_soc_register_dai(&wm8903_dai); @@ -1650,6 +1699,9 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, err_codec: snd_soc_unregister_codec(codec); +err_irq: + if (i2c->irq) + free_irq(i2c->irq, wm8903); err: wm8903_codec = NULL; kfree(wm8903); @@ -1659,12 +1711,16 @@ err: static __devexit int wm8903_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); + struct wm8903_priv *priv = codec->private_data; snd_soc_unregister_dai(&wm8903_dai); snd_soc_unregister_codec(codec); wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF); + if (client->irq) + free_irq(client->irq, priv); + kfree(codec->private_data); wm8903_codec = NULL;