From: Alexander Duyck Date: Thu, 11 Dec 2014 23:01:55 +0000 (-0800) Subject: arch: Cleanup read_barrier_depends() and comments X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8a449718414ff10b9d5559ed3e8e09c7178774f2;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git arch: Cleanup read_barrier_depends() and comments This patch is meant to cleanup the handling of read_barrier_depends and smp_read_barrier_depends. In multiple spots in the kernel headers read_barrier_depends is defined as "do {} while (0)", however we then go into the SMP vs non-SMP sections and have the SMP version reference read_barrier_depends, and the non-SMP define it as yet another empty do/while. With this commit I went through and cleaned out the duplicate definitions and reduced the number of definitions down to 2 per header. In addition I moved the 50 line comments for the macro from the x86 and mips headers that defined it as an empty do/while to those that were actually defining the macro, alpha and blackfin. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h index 3832bdb794fe..77516c87255d 100644 --- a/arch/alpha/include/asm/barrier.h +++ b/arch/alpha/include/asm/barrier.h @@ -7,6 +7,57 @@ #define rmb() __asm__ __volatile__("mb": : :"memory") #define wmb() __asm__ __volatile__("wmb": : :"memory") +/** + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + */ #define read_barrier_depends() __asm__ __volatile__("mb": : :"memory") #ifdef CONFIG_SMP diff --git a/arch/blackfin/include/asm/barrier.h b/arch/blackfin/include/asm/barrier.h index 420006877998..dfb66fe88b34 100644 --- a/arch/blackfin/include/asm/barrier.h +++ b/arch/blackfin/include/asm/barrier.h @@ -22,6 +22,57 @@ # define mb() do { barrier(); smp_check_barrier(); smp_mark_barrier(); } while (0) # define rmb() do { barrier(); smp_check_barrier(); } while (0) # define wmb() do { barrier(); smp_mark_barrier(); } while (0) +/* + * read_barrier_depends - Flush all pending reads that subsequents reads + * depend on. + * + * No data-dependent reads from memory-like regions are ever reordered + * over this barrier. All reads preceding this primitive are guaranteed + * to access memory (but not necessarily other CPUs' caches) before any + * reads following this primitive that depend on the data return by + * any of the preceding reads. This primitive is much lighter weight than + * rmb() on most CPUs, and is never heavier weight than is + * rmb(). + * + * These ordering constraints are respected by both the local CPU + * and the compiler. + * + * Ordering is not guaranteed by anything other than these primitives, + * not even by data dependencies. See the documentation for + * memory_barrier() for examples and URLs to more information. + * + * For example, the following code would force ordering (the initial + * value of "a" is zero, "b" is one, and "p" is "&a"): + * + * + * CPU 0 CPU 1 + * + * b = 2; + * memory_barrier(); + * p = &b; q = p; + * read_barrier_depends(); + * d = *q; + * + * + * because the read of "*q" depends on the read of "p" and these + * two reads are separated by a read_barrier_depends(). However, + * the following code, with the same initial values for "a" and "b": + * + * + * CPU 0 CPU 1 + * + * a = 2; + * memory_barrier(); + * b = 3; y = b; + * read_barrier_depends(); + * x = a; + * + * + * does not enforce ordering, since there is no data dependency between + * the read of "a" and the read of "b". Therefore, on some CPUs, such + * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() + * in cases like this where there are no data dependencies. + */ # define read_barrier_depends() do { barrier(); smp_check_barrier(); } while (0) #endif diff --git a/arch/ia64/include/asm/barrier.h b/arch/ia64/include/asm/barrier.h index a48957c7b445..e8fffb03963c 100644 --- a/arch/ia64/include/asm/barrier.h +++ b/arch/ia64/include/asm/barrier.h @@ -35,26 +35,22 @@ * it's (presumably) much slower than mf and (b) mf.a is supported for * sequential memory pages only. */ -#define mb() ia64_mf() -#define rmb() mb() -#define wmb() mb() -#define read_barrier_depends() do { } while(0) +#define mb() ia64_mf() +#define rmb() mb() +#define wmb() mb() #ifdef CONFIG_SMP # define smp_mb() mb() -# define smp_rmb() rmb() -# define smp_wmb() wmb() -# define smp_read_barrier_depends() read_barrier_depends() - #else - # define smp_mb() barrier() -# define smp_rmb() barrier() -# define smp_wmb() barrier() -# define smp_read_barrier_depends() do { } while(0) - #endif +#define smp_rmb() smp_mb() +#define smp_wmb() smp_mb() + +#define read_barrier_depends() do { } while (0) +#define smp_read_barrier_depends() do { } while (0) + #define smp_mb__before_atomic() barrier() #define smp_mb__after_atomic() barrier() diff --git a/arch/metag/include/asm/barrier.h b/arch/metag/include/asm/barrier.h index c7591e80067c..6d8b8c9b7c25 100644 --- a/arch/metag/include/asm/barrier.h +++ b/arch/metag/include/asm/barrier.h @@ -47,8 +47,6 @@ static inline void wmb(void) wr_fence(); } -#define read_barrier_depends() do { } while (0) - #ifndef CONFIG_SMP #define fence() do { } while (0) #define smp_mb() barrier() @@ -82,7 +80,10 @@ static inline void fence(void) #define smp_wmb() barrier() #endif #endif -#define smp_read_barrier_depends() do { } while (0) + +#define read_barrier_depends() do { } while (0) +#define smp_read_barrier_depends() do { } while (0) + #define set_mb(var, value) do { var = value; smp_mb(); } while (0) #define smp_store_release(p, v) \ diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index d0101dd0575e..3d69aa829a76 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -10,58 +10,6 @@ #include -/* - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - */ - #define read_barrier_depends() do { } while(0) #define smp_read_barrier_depends() do { } while(0) diff --git a/arch/powerpc/include/asm/barrier.h b/arch/powerpc/include/asm/barrier.h index bab79a110c7b..cb6d66c6e3e1 100644 --- a/arch/powerpc/include/asm/barrier.h +++ b/arch/powerpc/include/asm/barrier.h @@ -33,7 +33,6 @@ #define mb() __asm__ __volatile__ ("sync" : : : "memory") #define rmb() __asm__ __volatile__ ("sync" : : : "memory") #define wmb() __asm__ __volatile__ ("sync" : : : "memory") -#define read_barrier_depends() do { } while(0) #define set_mb(var, value) do { var = value; mb(); } while (0) @@ -50,16 +49,17 @@ #define smp_mb() mb() #define smp_rmb() __lwsync() #define smp_wmb() __asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory") -#define smp_read_barrier_depends() read_barrier_depends() #else #define __lwsync() barrier() #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while(0) #endif /* CONFIG_SMP */ +#define read_barrier_depends() do { } while (0) +#define smp_read_barrier_depends() do { } while (0) + /* * This is a barrier which prevents following instructions from being * started until the value of the argument x is known. For example, if diff --git a/arch/s390/include/asm/barrier.h b/arch/s390/include/asm/barrier.h index b5dce6544d76..33d191d295e4 100644 --- a/arch/s390/include/asm/barrier.h +++ b/arch/s390/include/asm/barrier.h @@ -24,11 +24,12 @@ #define rmb() mb() #define wmb() mb() -#define read_barrier_depends() do { } while(0) #define smp_mb() mb() #define smp_rmb() rmb() #define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() + +#define read_barrier_depends() do { } while (0) +#define smp_read_barrier_depends() do { } while (0) #define smp_mb__before_atomic() smp_mb() #define smp_mb__after_atomic() smp_mb() diff --git a/arch/sparc/include/asm/barrier_64.h b/arch/sparc/include/asm/barrier_64.h index 305dcc3dc721..6c974c0977ad 100644 --- a/arch/sparc/include/asm/barrier_64.h +++ b/arch/sparc/include/asm/barrier_64.h @@ -37,7 +37,6 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ #define rmb() __asm__ __volatile__("":::"memory") #define wmb() __asm__ __volatile__("":::"memory") -#define read_barrier_depends() do { } while(0) #define set_mb(__var, __value) \ do { __var = __value; membar_safe("#StoreLoad"); } while(0) @@ -51,7 +50,8 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ #define smp_wmb() __asm__ __volatile__("":::"memory") #endif -#define smp_read_barrier_depends() do { } while(0) +#define read_barrier_depends() do { } while (0) +#define smp_read_barrier_depends() do { } while (0) #define smp_store_release(p, v) \ do { \ diff --git a/arch/x86/include/asm/barrier.h b/arch/x86/include/asm/barrier.h index 0f4460b5636d..5238000285c1 100644 --- a/arch/x86/include/asm/barrier.h +++ b/arch/x86/include/asm/barrier.h @@ -24,60 +24,6 @@ #define wmb() asm volatile("sfence" ::: "memory") #endif -/** - * read_barrier_depends - Flush all pending reads that subsequents reads - * depend on. - * - * No data-dependent reads from memory-like regions are ever reordered - * over this barrier. All reads preceding this primitive are guaranteed - * to access memory (but not necessarily other CPUs' caches) before any - * reads following this primitive that depend on the data return by - * any of the preceding reads. This primitive is much lighter weight than - * rmb() on most CPUs, and is never heavier weight than is - * rmb(). - * - * These ordering constraints are respected by both the local CPU - * and the compiler. - * - * Ordering is not guaranteed by anything other than these primitives, - * not even by data dependencies. See the documentation for - * memory_barrier() for examples and URLs to more information. - * - * For example, the following code would force ordering (the initial - * value of "a" is zero, "b" is one, and "p" is "&a"): - * - * - * CPU 0 CPU 1 - * - * b = 2; - * memory_barrier(); - * p = &b; q = p; - * read_barrier_depends(); - * d = *q; - * - * - * because the read of "*q" depends on the read of "p" and these - * two reads are separated by a read_barrier_depends(). However, - * the following code, with the same initial values for "a" and "b": - * - * - * CPU 0 CPU 1 - * - * a = 2; - * memory_barrier(); - * b = 3; y = b; - * read_barrier_depends(); - * x = a; - * - * - * does not enforce ordering, since there is no data dependency between - * the read of "a" and the read of "b". Therefore, on some CPUs, such - * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb() - * in cases like this where there are no data dependencies. - **/ - -#define read_barrier_depends() do { } while (0) - #ifdef CONFIG_SMP #define smp_mb() mb() #ifdef CONFIG_X86_PPRO_FENCE @@ -86,16 +32,17 @@ # define smp_rmb() barrier() #endif #define smp_wmb() barrier() -#define smp_read_barrier_depends() read_barrier_depends() #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) #else /* !SMP */ #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) #define set_mb(var, value) do { var = value; barrier(); } while (0) #endif /* SMP */ +#define read_barrier_depends() do { } while (0) +#define smp_read_barrier_depends() do { } while (0) + #if defined(CONFIG_X86_PPRO_FENCE) /* diff --git a/arch/x86/um/asm/barrier.h b/arch/x86/um/asm/barrier.h index cc04e67bfd05..d6511d954e2b 100644 --- a/arch/x86/um/asm/barrier.h +++ b/arch/x86/um/asm/barrier.h @@ -29,8 +29,6 @@ #endif /* CONFIG_X86_32 */ -#define read_barrier_depends() do { } while (0) - #ifdef CONFIG_SMP #define smp_mb() mb() @@ -42,7 +40,6 @@ #define smp_wmb() barrier() -#define smp_read_barrier_depends() read_barrier_depends() #define set_mb(var, value) do { (void)xchg(&var, value); } while (0) #else /* CONFIG_SMP */ @@ -50,11 +47,13 @@ #define smp_mb() barrier() #define smp_rmb() barrier() #define smp_wmb() barrier() -#define smp_read_barrier_depends() do { } while (0) #define set_mb(var, value) do { var = value; barrier(); } while (0) #endif /* CONFIG_SMP */ +#define read_barrier_depends() do { } while (0) +#define smp_read_barrier_depends() do { } while (0) + /* * Stop RDTSC speculation. This is needed when you need to use RDTSC * (or get_cycles or vread that possibly accesses the TSC) in a defined