From: danborkmann@iogearbox.net Date: Thu, 19 Jan 2012 00:39:31 +0000 (+0000) Subject: drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8a3b7a252dca9fb28c23b5bf76c49180a2b60d3b;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver This driver adds support for Xilinx 10/100/1000 AXI Ethernet. It can be used, for instance, on Xilinx boards with a Microblaze architecture like the ML605. The patch is against the latest net-next tree and checkpatch clean. Signed-off-by: Ariane Keller Signed-off-by: Daniel Borkmann Signed-off-by: David S. Miller --- diff --git a/MAINTAINERS b/MAINTAINERS index 93c68d5f1cf4..087b65d12580 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7469,6 +7469,12 @@ S: Supported F: Documentation/filesystems/xfs.txt F: fs/xfs/ +XILINX AXI ETHERNET DRIVER +M: Ariane Keller +M: Daniel Borkmann +S: Maintained +F: drivers/net/ethernet/xilinx/xilinx_axienet* + XILINX SYSTEMACE DRIVER M: Grant Likely W: http://www.secretlab.ca/ diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig index d5a826063a82..5778a4ae1164 100644 --- a/drivers/net/ethernet/xilinx/Kconfig +++ b/drivers/net/ethernet/xilinx/Kconfig @@ -25,6 +25,14 @@ config XILINX_EMACLITE ---help--- This driver supports the 10/100 Ethernet Lite from Xilinx. +config XILINX_AXI_EMAC + tristate "Xilinx 10/100/1000 AXI Ethernet support" + depends on (PPC32 || MICROBLAZE) + select PHYLIB + ---help--- + This driver supports the 10/100/1000 Ethernet from Xilinx for the + AXI bus interface used in Xilinx Virtex FPGAs. + config XILINX_LL_TEMAC tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver" depends on (PPC || MICROBLAZE) diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile index 5feac734ea45..214205e975e3 100644 --- a/drivers/net/ethernet/xilinx/Makefile +++ b/drivers/net/ethernet/xilinx/Makefile @@ -5,3 +5,5 @@ ll_temac-objs := ll_temac_main.o ll_temac_mdio.o obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o +xilinx_emac-objs := xilinx_axienet_main.o xilinx_axienet_mdio.o +obj-$(CONFIG_XILINX_AXI_EMAC) += xilinx_emac.o diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h new file mode 100644 index 000000000000..cc83af083fd7 --- /dev/null +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -0,0 +1,508 @@ +/* + * Definitions for Xilinx Axi Ethernet device driver. + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * Copyright (c) 2010 Xilinx, Inc. All rights reserved. + * Copyright (c) 2012 Daniel Borkmann, + * Copyright (c) 2012 Ariane Keller, + */ + +#ifndef XILINX_AXIENET_H +#define XILINX_AXIENET_H + +#include +#include +#include + +/* Packet size info */ +#define XAE_HDR_SIZE 14 /* Size of Ethernet header */ +#define XAE_HDR_VLAN_SIZE 18 /* Size of an Ethernet hdr + VLAN */ +#define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ +#define XAE_MTU 1500 /* Max MTU of an Ethernet frame */ +#define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */ + +#define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) + +/* Configuration options */ + +/* Accept all incoming packets. Default: disabled (cleared) */ +#define XAE_OPTION_PROMISC (1 << 0) + +/* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ +#define XAE_OPTION_JUMBO (1 << 1) + +/* VLAN Rx & Tx frame support. Default: disabled (cleared) */ +#define XAE_OPTION_VLAN (1 << 2) + +/* Enable recognition of flow control frames on Rx. Default: enabled (set) */ +#define XAE_OPTION_FLOW_CONTROL (1 << 4) + +/* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not + * stripped. Default: disabled (set) */ +#define XAE_OPTION_FCS_STRIP (1 << 5) + +/* Generate FCS field and add PAD automatically for outgoing frames. + * Default: enabled (set) */ +#define XAE_OPTION_FCS_INSERT (1 << 6) + +/* Enable Length/Type error checking for incoming frames. When this option is + * set, the MAC will filter frames that have a mismatched type/length field + * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these + * types of frames are encountered. When this option is cleared, the MAC will + * allow these types of frames to be received. Default: enabled (set) */ +#define XAE_OPTION_LENTYPE_ERR (1 << 7) + +/* Enable the transmitter. Default: enabled (set) */ +#define XAE_OPTION_TXEN (1 << 11) + +/* Enable the receiver. Default: enabled (set) */ +#define XAE_OPTION_RXEN (1 << 12) + +/* Default options set when device is initialized or reset */ +#define XAE_OPTION_DEFAULTS \ + (XAE_OPTION_TXEN | \ + XAE_OPTION_FLOW_CONTROL | \ + XAE_OPTION_RXEN) + +/* Axi DMA Register definitions */ + +#define XAXIDMA_TX_CR_OFFSET 0x00000000 /* Channel control */ +#define XAXIDMA_TX_SR_OFFSET 0x00000004 /* Status */ +#define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */ +#define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */ + +#define XAXIDMA_RX_CR_OFFSET 0x00000030 /* Channel control */ +#define XAXIDMA_RX_SR_OFFSET 0x00000034 /* Status */ +#define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */ +#define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */ + +#define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */ +#define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */ + +#define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */ +#define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */ +#define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */ +#define XAXIDMA_BD_STS_OFFSET 0x1C /* Status */ +#define XAXIDMA_BD_USR0_OFFSET 0x20 /* User IP specific word0 */ +#define XAXIDMA_BD_USR1_OFFSET 0x24 /* User IP specific word1 */ +#define XAXIDMA_BD_USR2_OFFSET 0x28 /* User IP specific word2 */ +#define XAXIDMA_BD_USR3_OFFSET 0x2C /* User IP specific word3 */ +#define XAXIDMA_BD_USR4_OFFSET 0x30 /* User IP specific word4 */ +#define XAXIDMA_BD_ID_OFFSET 0x34 /* Sw ID */ +#define XAXIDMA_BD_HAS_STSCNTRL_OFFSET 0x38 /* Whether has stscntrl strm */ +#define XAXIDMA_BD_HAS_DRE_OFFSET 0x3C /* Whether has DRE */ + +#define XAXIDMA_BD_HAS_DRE_SHIFT 8 /* Whether has DRE shift */ +#define XAXIDMA_BD_HAS_DRE_MASK 0xF00 /* Whether has DRE mask */ +#define XAXIDMA_BD_WORDLEN_MASK 0xFF /* Whether has DRE mask */ + +#define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */ +#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ +#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ +#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ + +#define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */ +#define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */ + +#define XAXIDMA_DELAY_SHIFT 24 +#define XAXIDMA_COALESCE_SHIFT 16 + +#define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ +#define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ +#define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */ +#define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ + +/* Default TX/RX Threshold and waitbound values for SGDMA mode */ +#define XAXIDMA_DFT_TX_THRESHOLD 24 +#define XAXIDMA_DFT_TX_WAITBOUND 254 +#define XAXIDMA_DFT_RX_THRESHOLD 24 +#define XAXIDMA_DFT_RX_WAITBOUND 254 + +#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ +#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ +#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ + +#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */ +#define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */ +#define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */ +#define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */ +#define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */ +#define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */ +#define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */ +#define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */ +#define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */ + +#define XAXIDMA_BD_MINIMUM_ALIGNMENT 0x40 + +/* Axi Ethernet registers definition */ +#define XAE_RAF_OFFSET 0x00000000 /* Reset and Address filter */ +#define XAE_TPF_OFFSET 0x00000004 /* Tx Pause Frame */ +#define XAE_IFGP_OFFSET 0x00000008 /* Tx Inter-frame gap adjustment*/ +#define XAE_IS_OFFSET 0x0000000C /* Interrupt status */ +#define XAE_IP_OFFSET 0x00000010 /* Interrupt pending */ +#define XAE_IE_OFFSET 0x00000014 /* Interrupt enable */ +#define XAE_TTAG_OFFSET 0x00000018 /* Tx VLAN TAG */ +#define XAE_RTAG_OFFSET 0x0000001C /* Rx VLAN TAG */ +#define XAE_UAWL_OFFSET 0x00000020 /* Unicast address word lower */ +#define XAE_UAWU_OFFSET 0x00000024 /* Unicast address word upper */ +#define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */ +#define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */ +#define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */ +#define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */ +#define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */ +#define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */ +#define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */ +#define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */ +#define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */ +#define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */ +#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */ +#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ +#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ +#define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */ +#define XAE_MDIO_MIP_OFFSET 0x00000620 /* MII Mgmt Interrupt Pending + * register offset */ +#define XAE_MDIO_MIE_OFFSET 0x00000640 /* MII Management Interrupt Enable + * register offset */ +#define XAE_MDIO_MIC_OFFSET 0x00000660 /* MII Management Interrupt Clear + * register offset. */ +#define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ +#define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ +#define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ +#define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */ +#define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */ + +#define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */ +#define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */ +#define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */ + +/* Bit Masks for Axi Ethernet RAF register */ +#define XAE_RAF_MCSTREJ_MASK 0x00000002 /* Reject receive multicast + * destination address */ +#define XAE_RAF_BCSTREJ_MASK 0x00000004 /* Reject receive broadcast + * destination address */ +#define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */ +#define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */ +#define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */ +#define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */ +#define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */ +#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 /* Exteneded Multicast + * Filtering mode + */ +#define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */ +#define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */ +#define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */ +#define XAE_RAF_RXVTAGMODE_SHIFT 5 /* Rx Tag mode shift bits */ +#define XAE_RAF_TXVSTRPMODE_SHIFT 7 /* Tx strip mode shift bits*/ +#define XAE_RAF_RXVSTRPMODE_SHIFT 9 /* Rx Strip mode shift bits*/ + +/* Bit Masks for Axi Ethernet TPF and IFGP registers */ +#define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */ +#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Transmit inter-frame + * gap adjustment value */ + +/* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply + * for all 3 registers. */ +#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 /* Hard register access + * complete */ +#define XAE_INT_AUTONEG_MASK 0x00000002 /* Auto negotiation + * complete */ +#define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */ +#define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ +#define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */ +#define XAE_INT_TXCMPIT_MASK 0x00000020 /* Tx complete */ +#define XAE_INT_RXDCMLOCK_MASK 0x00000040 /* Rx Dcm Lock */ +#define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */ +#define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */ +#define XAE_INT_ALL_MASK 0x0000003F /* All the ints */ + +#define XAE_INT_RECV_ERROR_MASK \ + (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that + * indicate receive + * errors */ + +/* Bit masks for Axi Ethernet VLAN TPID Word 0 register */ +#define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */ +#define XAE_TPID_1_MASK 0xFFFF0000 /* TPID 1 */ + +/* Bit masks for Axi Ethernet VLAN TPID Word 1 register */ +#define XAE_TPID_2_MASK 0x0000FFFF /* TPID 0 */ +#define XAE_TPID_3_MASK 0xFFFF0000 /* TPID 1 */ + +/* Bit masks for Axi Ethernet RCW1 register */ +#define XAE_RCW1_RST_MASK 0x80000000 /* Reset */ +#define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */ +#define XAE_RCW1_FCS_MASK 0x20000000 /* In-Band FCS enable + * (FCS not stripped) */ +#define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ +#define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */ +#define XAE_RCW1_LT_DIS_MASK 0x02000000 /* Length/type field valid check + * disable */ +#define XAE_RCW1_CL_DIS_MASK 0x01000000 /* Control frame Length check + * disable */ +#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address + * bits [47:32]. Bits [31:0] are + * stored in register RCW0 */ + +/* Bit masks for Axi Ethernet TC register */ +#define XAE_TC_RST_MASK 0x80000000 /* Reset */ +#define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */ +#define XAE_TC_FCS_MASK 0x20000000 /* In-Band FCS enable + * (FCS not generated) */ +#define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ +#define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */ +#define XAE_TC_IFG_MASK 0x02000000 /* Inter-frame gap adjustment + * enable */ + +/* Bit masks for Axi Ethernet FCC register */ +#define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */ +#define XAE_FCC_FCTX_MASK 0x40000000 /* Tx flow control enable */ + +/* Bit masks for Axi Ethernet EMMC register */ +#define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */ +#define XAE_EMMC_RGMII_MASK 0x20000000 /* RGMII mode enable */ +#define XAE_EMMC_SGMII_MASK 0x10000000 /* SGMII mode enable */ +#define XAE_EMMC_GPCS_MASK 0x08000000 /* 1000BaseX mode enable */ +#define XAE_EMMC_HOST_MASK 0x04000000 /* Host interface enable */ +#define XAE_EMMC_TX16BIT 0x02000000 /* 16 bit Tx client enable */ +#define XAE_EMMC_RX16BIT 0x01000000 /* 16 bit Rx client enable */ +#define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */ +#define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */ +#define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */ + +/* Bit masks for Axi Ethernet PHYC register */ +#define XAE_PHYC_SGMIILINKSPEED_MASK 0xC0000000 /* SGMII link speed mask*/ +#define XAE_PHYC_RGMIILINKSPEED_MASK 0x0000000C /* RGMII link speed */ +#define XAE_PHYC_RGMIIHD_MASK 0x00000002 /* RGMII Half-duplex */ +#define XAE_PHYC_RGMIILINK_MASK 0x00000001 /* RGMII link status */ +#define XAE_PHYC_RGLINKSPD_10 0x00000000 /* RGMII link 10 Mbit */ +#define XAE_PHYC_RGLINKSPD_100 0x00000004 /* RGMII link 100 Mbit */ +#define XAE_PHYC_RGLINKSPD_1000 0x00000008 /* RGMII link 1000 Mbit */ +#define XAE_PHYC_SGLINKSPD_10 0x00000000 /* SGMII link 10 Mbit */ +#define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */ +#define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */ + +/* Bit masks for Axi Ethernet MDIO interface MC register */ +#define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */ +#define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */ + +/* Bit masks for Axi Ethernet MDIO interface MCR register */ +#define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */ +#define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */ +#define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */ +#define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */ +#define XAE_MDIO_MCR_OP_MASK 0x0000C000 /* Operation Code Mask */ +#define XAE_MDIO_MCR_OP_SHIFT 13 /* Operation Code Shift */ +#define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */ +#define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */ +#define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */ +#define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */ + +/* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */ +#define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */ + +/* Bit masks for Axi Ethernet UAW1 register */ +#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Station address bits + * [47:32]; Station address + * bits [31:0] are stored in + * register UAW0 */ + +/* Bit masks for Axi Ethernet FMI register */ +#define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ +#define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */ + +#define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */ + +/* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */ +#define XAE_PHY_TYPE_MII 0 +#define XAE_PHY_TYPE_GMII 1 +#define XAE_PHY_TYPE_RGMII_1_3 2 +#define XAE_PHY_TYPE_RGMII_2_0 3 +#define XAE_PHY_TYPE_SGMII 4 +#define XAE_PHY_TYPE_1000BASE_X 5 + +#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Total number of entries in the + * hardware multicast table. */ + +/* Axi Ethernet Synthesis features */ +#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) +#define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) +#define XAE_FEATURE_FULL_RX_CSUM (1 << 2) +#define XAE_FEATURE_FULL_TX_CSUM (1 << 3) + +#define XAE_NO_CSUM_OFFLOAD 0 + +#define XAE_FULL_CSUM_STATUS_MASK 0x00000038 +#define XAE_IP_UDP_CSUM_VALIDATED 0x00000003 +#define XAE_IP_TCP_CSUM_VALIDATED 0x00000002 + +#define DELAY_OF_ONE_MILLISEC 1000 + +/** + * struct axidma_bd - Axi Dma buffer descriptor layout + * @next: MM2S/S2MM Next Descriptor Pointer + * @reserved1: Reserved and not used + * @phys: MM2S/S2MM Buffer Address + * @reserved2: Reserved and not used + * @reserved3: Reserved and not used + * @reserved4: Reserved and not used + * @cntrl: MM2S/S2MM Control value + * @status: MM2S/S2MM Status value + * @app0: MM2S/S2MM User Application Field 0. + * @app1: MM2S/S2MM User Application Field 1. + * @app2: MM2S/S2MM User Application Field 2. + * @app3: MM2S/S2MM User Application Field 3. + * @app4: MM2S/S2MM User Application Field 4. + * @sw_id_offset: MM2S/S2MM Sw ID + * @reserved5: Reserved and not used + * @reserved6: Reserved and not used + */ +struct axidma_bd { + u32 next; /* Physical address of next buffer descriptor */ + u32 reserved1; + u32 phys; + u32 reserved2; + u32 reserved3; + u32 reserved4; + u32 cntrl; + u32 status; + u32 app0; + u32 app1; /* TX start << 16 | insert */ + u32 app2; /* TX csum seed */ + u32 app3; + u32 app4; + u32 sw_id_offset; + u32 reserved5; + u32 reserved6; +}; + +/** + * struct axienet_local - axienet private per device data + * @ndev: Pointer for net_device to which it will be attached. + * @dev: Pointer to device structure + * @phy_dev: Pointer to PHY device structure attached to the axienet_local + * @phy_node: Pointer to device node structure + * @mii_bus: Pointer to MII bus structure + * @mdio_irqs: IRQs table for MDIO bus required in mii_bus structure + * @regs: Base address for the axienet_local device address space + * @dma_regs: Base address for the axidma device address space + * @dma_err_tasklet: Tasklet structure to process Axi DMA errors + * @tx_irq: Axidma TX IRQ number + * @rx_irq: Axidma RX IRQ number + * @temac_type: axienet type to identify between soft and hard temac + * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X + * @options: AxiEthernet option word + * @last_link: Phy link state in which the PHY was negotiated earlier + * @features: Stores the extended features supported by the axienet hw + * @tx_bd_v: Virtual address of the TX buffer descriptor ring + * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring + * @rx_bd_v: Virtual address of the RX buffer descriptor ring + * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring + * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being + * accessed currently. Used while alloc. BDs before a TX starts + * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being + * accessed currently. Used while processing BDs after the TX + * completed. + * @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being + * accessed currently. + * @max_frm_size: Stores the maximum size of the frame that can be that + * Txed/Rxed in the existing hardware. If jumbo option is + * supported, the maximum frame size would be 9k. Else it is + * 1522 bytes (assuming support for basic VLAN) + * @jumbo_support: Stores hardware configuration for jumbo support. If hardware + * can handle jumbo packets, this entry will be 1, else 0. + */ +struct axienet_local { + struct net_device *ndev; + struct device *dev; + + /* Connection to PHY device */ + struct phy_device *phy_dev; /* Pointer to PHY device */ + struct device_node *phy_node; + + /* MDIO bus data */ + struct mii_bus *mii_bus; /* MII bus reference */ + int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */ + + /* IO registers, dma functions and IRQs */ + void __iomem *regs; + void __iomem *dma_regs; + + struct tasklet_struct dma_err_tasklet; + + int tx_irq; + int rx_irq; + u32 temac_type; + u32 phy_type; + + u32 options; /* Current options word */ + u32 last_link; + u32 features; + + /* Buffer descriptors */ + struct axidma_bd *tx_bd_v; + dma_addr_t tx_bd_p; + struct axidma_bd *rx_bd_v; + dma_addr_t rx_bd_p; + u32 tx_bd_ci; + u32 tx_bd_tail; + u32 rx_bd_ci; + + u32 max_frm_size; + u32 jumbo_support; + + int csum_offload_on_tx_path; + int csum_offload_on_rx_path; + + u32 coalesce_count_rx; + u32 coalesce_count_tx; +}; + +/** + * struct axiethernet_option - Used to set axi ethernet hardware options + * @opt: Option to be set. + * @reg: Register offset to be written for setting the option + * @m_or: Mask to be ORed for setting the option in the register + */ +struct axienet_option { + u32 opt; + u32 reg; + u32 m_or; +}; + +/** + * axienet_ior - Memory mapped Axi Ethernet register read + * @lp: Pointer to axienet local structure + * @offset: Address offset from the base address of Axi Ethernet core + * + * returns: The contents of the Axi Ethernet register + * + * This function returns the contents of the corresponding register. + */ +static inline u32 axienet_ior(struct axienet_local *lp, off_t offset) +{ + return in_be32(lp->regs + offset); +} + +/** + * axienet_iow - Memory mapped Axi Ethernet register write + * @lp: Pointer to axienet local structure + * @offset: Address offset from the base address of Axi Ethernet core + * @value: Value to be written into the Axi Ethernet register + * + * This function writes the desired value into the corresponding Axi Ethernet + * register. + */ +static inline void axienet_iow(struct axienet_local *lp, off_t offset, + u32 value) +{ + out_be32((lp->regs + offset), value); +} + +/* Function prototypes visible in xilinx_axienet_mdio.c for other files */ +int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np); +int axienet_mdio_wait_until_ready(struct axienet_local *lp); +void axienet_mdio_teardown(struct axienet_local *lp); + +#endif /* XILINX_AXI_ENET_H */ diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c new file mode 100644 index 000000000000..ea50caf8925b --- /dev/null +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -0,0 +1,1682 @@ +/* + * Xilinx Axi Ethernet device driver + * + * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi + * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. + * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. + * Copyright (c) 2010 Xilinx, Inc. All rights reserved. + * Copyright (c) 2012 Daniel Borkmann, + * Copyright (c) 2012 Ariane Keller, + * + * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6 + * and Spartan6. + * + * TODO: + * - Add Axi Fifo support. + * - Factor out Axi DMA code into separate driver. + * - Test and fix basic multicast filtering. + * - Add support for extended multicast filtering. + * - Test basic VLAN support. + * - Add support for extended VLAN support. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "xilinx_axienet.h" + +/* Descriptors defines for Tx and Rx DMA - 2^n for the best performance */ +#define TX_BD_NUM 64 +#define RX_BD_NUM 128 + +/* Must be shorter than length of ethtool_drvinfo.driver field to fit */ +#define DRIVER_NAME "xaxienet" +#define DRIVER_DESCRIPTION "Xilinx Axi Ethernet driver" +#define DRIVER_VERSION "1.00a" + +#define AXIENET_REGS_N 32 + +/* Match table for of_platform binding */ +static struct of_device_id axienet_of_match[] __devinitdata = { + { .compatible = "xlnx,axi-ethernet-1.00.a", }, + { .compatible = "xlnx,axi-ethernet-1.01.a", }, + { .compatible = "xlnx,axi-ethernet-2.01.a", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, axienet_of_match); + +/* Option table for setting up Axi Ethernet hardware options */ +static struct axienet_option axienet_options[] = { + /* Turn on jumbo packet support for both Rx and Tx */ + { + .opt = XAE_OPTION_JUMBO, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_JUM_MASK, + }, { + .opt = XAE_OPTION_JUMBO, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_JUM_MASK, + }, { /* Turn on VLAN packet support for both Rx and Tx */ + .opt = XAE_OPTION_VLAN, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_VLAN_MASK, + }, { + .opt = XAE_OPTION_VLAN, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_VLAN_MASK, + }, { /* Turn on FCS stripping on receive packets */ + .opt = XAE_OPTION_FCS_STRIP, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_FCS_MASK, + }, { /* Turn on FCS insertion on transmit packets */ + .opt = XAE_OPTION_FCS_INSERT, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_FCS_MASK, + }, { /* Turn off length/type field checking on receive packets */ + .opt = XAE_OPTION_LENTYPE_ERR, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_LT_DIS_MASK, + }, { /* Turn on Rx flow control */ + .opt = XAE_OPTION_FLOW_CONTROL, + .reg = XAE_FCC_OFFSET, + .m_or = XAE_FCC_FCRX_MASK, + }, { /* Turn on Tx flow control */ + .opt = XAE_OPTION_FLOW_CONTROL, + .reg = XAE_FCC_OFFSET, + .m_or = XAE_FCC_FCTX_MASK, + }, { /* Turn on promiscuous frame filtering */ + .opt = XAE_OPTION_PROMISC, + .reg = XAE_FMI_OFFSET, + .m_or = XAE_FMI_PM_MASK, + }, { /* Enable transmitter */ + .opt = XAE_OPTION_TXEN, + .reg = XAE_TC_OFFSET, + .m_or = XAE_TC_TX_MASK, + }, { /* Enable receiver */ + .opt = XAE_OPTION_RXEN, + .reg = XAE_RCW1_OFFSET, + .m_or = XAE_RCW1_RX_MASK, + }, + {} +}; + +/** + * axienet_dma_in32 - Memory mapped Axi DMA register read + * @lp: Pointer to axienet local structure + * @reg: Address offset from the base address of the Axi DMA core + * + * returns: The contents of the Axi DMA register + * + * This function returns the contents of the corresponding Axi DMA register. + */ +static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg) +{ + return in_be32(lp->dma_regs + reg); +} + +/** + * axienet_dma_out32 - Memory mapped Axi DMA register write. + * @lp: Pointer to axienet local structure + * @reg: Address offset from the base address of the Axi DMA core + * @value: Value to be written into the Axi DMA register + * + * This function writes the desired value into the corresponding Axi DMA + * register. + */ +static inline void axienet_dma_out32(struct axienet_local *lp, + off_t reg, u32 value) +{ + out_be32((lp->dma_regs + reg), value); +} + +/** + * axienet_dma_bd_release - Release buffer descriptor rings + * @ndev: Pointer to the net_device structure + * + * This function is used to release the descriptors allocated in + * axienet_dma_bd_init. axienet_dma_bd_release is called when Axi Ethernet + * driver stop api is called. + */ +static void axienet_dma_bd_release(struct net_device *ndev) +{ + int i; + struct axienet_local *lp = netdev_priv(ndev); + + for (i = 0; i < RX_BD_NUM; i++) { + dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys, + lp->max_frm_size, DMA_FROM_DEVICE); + dev_kfree_skb((struct sk_buff *) + (lp->rx_bd_v[i].sw_id_offset)); + } + + if (lp->rx_bd_v) { + dma_free_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + lp->rx_bd_v, + lp->rx_bd_p); + } + if (lp->tx_bd_v) { + dma_free_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + lp->tx_bd_v, + lp->tx_bd_p); + } +} + +/** + * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA + * @ndev: Pointer to the net_device structure + * + * returns: 0, on success + * -ENOMEM, on failure + * + * This function is called to initialize the Rx and Tx DMA descriptor + * rings. This initializes the descriptors with required default values + * and is called when Axi Ethernet driver reset is called. + */ +static int axienet_dma_bd_init(struct net_device *ndev) +{ + u32 cr; + int i; + struct sk_buff *skb; + struct axienet_local *lp = netdev_priv(ndev); + + /* Reset the indexes which are used for accessing the BDs */ + lp->tx_bd_ci = 0; + lp->tx_bd_tail = 0; + lp->rx_bd_ci = 0; + + /* + * Allocate the Tx and Rx buffer descriptors. + */ + lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->tx_bd_v) * TX_BD_NUM, + &lp->tx_bd_p, + GFP_KERNEL); + if (!lp->tx_bd_v) { + dev_err(&ndev->dev, "unable to allocate DMA Tx buffer " + "descriptors"); + goto out; + } + + lp->rx_bd_v = dma_alloc_coherent(ndev->dev.parent, + sizeof(*lp->rx_bd_v) * RX_BD_NUM, + &lp->rx_bd_p, + GFP_KERNEL); + if (!lp->rx_bd_v) { + dev_err(&ndev->dev, "unable to allocate DMA Rx buffer " + "descriptors"); + goto out; + } + + memset(lp->tx_bd_v, 0, sizeof(*lp->tx_bd_v) * TX_BD_NUM); + for (i = 0; i < TX_BD_NUM; i++) { + lp->tx_bd_v[i].next = lp->tx_bd_p + + sizeof(*lp->tx_bd_v) * + ((i + 1) % TX_BD_NUM); + } + + memset(lp->rx_bd_v, 0, sizeof(*lp->rx_bd_v) * RX_BD_NUM); + for (i = 0; i < RX_BD_NUM; i++) { + lp->rx_bd_v[i].next = lp->rx_bd_p + + sizeof(*lp->rx_bd_v) * + ((i + 1) % RX_BD_NUM); + + skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); + if (!skb) { + dev_err(&ndev->dev, "alloc_skb error %d\n", i); + goto out; + } + + lp->rx_bd_v[i].sw_id_offset = (u32) skb; + lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent, + skb->data, + lp->max_frm_size, + DMA_FROM_DEVICE); + lp->rx_bd_v[i].cntrl = lp->max_frm_size; + } + + /* Start updating the Rx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = ((cr & ~XAXIDMA_COALESCE_MASK) | + ((lp->coalesce_count_rx) << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = ((cr & ~XAXIDMA_DELAY_MASK) | + (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + /* Start updating the Tx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | + ((lp->coalesce_count_tx) << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = (((cr & ~XAXIDMA_DELAY_MASK)) | + (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + /* Populate the tail pointer and bring the Rx Axi DMA engine out of + * halted state. This will make the Rx side ready for reception.*/ + axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); + + /* Write to the RS (Run-stop) bit in the Tx channel control register. + * Tx channel is now ready to run. But only after we write to the + * tail pointer register that the Tx channel will start transmitting */ + axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + + return 0; +out: + axienet_dma_bd_release(ndev); + return -ENOMEM; +} + +/** + * axienet_set_mac_address - Write the MAC address + * @ndev: Pointer to the net_device structure + * @address: 6 byte Address to be written as MAC address + * + * This function is called to initialize the MAC address of the Axi Ethernet + * core. It writes to the UAW0 and UAW1 registers of the core. + */ +static void axienet_set_mac_address(struct net_device *ndev, void *address) +{ + struct axienet_local *lp = netdev_priv(ndev); + + if (address) + memcpy(ndev->dev_addr, address, ETH_ALEN); + if (!is_valid_ether_addr(ndev->dev_addr)) + random_ether_addr(ndev->dev_addr); + + /* Set up unicast MAC address filter set its mac address */ + axienet_iow(lp, XAE_UAW0_OFFSET, + (ndev->dev_addr[0]) | + (ndev->dev_addr[1] << 8) | + (ndev->dev_addr[2] << 16) | + (ndev->dev_addr[3] << 24)); + axienet_iow(lp, XAE_UAW1_OFFSET, + (((axienet_ior(lp, XAE_UAW1_OFFSET)) & + ~XAE_UAW1_UNICASTADDR_MASK) | + (ndev->dev_addr[4] | + (ndev->dev_addr[5] << 8)))); +} + +/** + * netdev_set_mac_address - Write the MAC address (from outside the driver) + * @ndev: Pointer to the net_device structure + * @p: 6 byte Address to be written as MAC address + * + * returns: 0 for all conditions. Presently, there is no failure case. + * + * This function is called to initialize the MAC address of the Axi Ethernet + * core. It calls the core specific axienet_set_mac_address. This is the + * function that goes into net_device_ops structure entry ndo_set_mac_address. + */ +static int netdev_set_mac_address(struct net_device *ndev, void *p) +{ + struct sockaddr *addr = p; + axienet_set_mac_address(ndev, addr->sa_data); + return 0; +} + +/** + * axienet_set_multicast_list - Prepare the multicast table + * @ndev: Pointer to the net_device structure + * + * This function is called to initialize the multicast table during + * initialization. The Axi Ethernet basic multicast support has a four-entry + * multicast table which is initialized here. Additionally this function + * goes into the net_device_ops structure entry ndo_set_multicast_list. This + * means whenever the multicast table entries need to be updated this + * function gets called. + */ +static void axienet_set_multicast_list(struct net_device *ndev) +{ + int i; + u32 reg, af0reg, af1reg; + struct axienet_local *lp = netdev_priv(ndev); + + if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) || + netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) { + /* We must make the kernel realize we had to move into + * promiscuous mode. If it was a promiscuous mode request + * the flag is already set. If not we set it. */ + ndev->flags |= IFF_PROMISC; + reg = axienet_ior(lp, XAE_FMI_OFFSET); + reg |= XAE_FMI_PM_MASK; + axienet_iow(lp, XAE_FMI_OFFSET, reg); + dev_info(&ndev->dev, "Promiscuous mode enabled.\n"); + } else if (!netdev_mc_empty(ndev)) { + struct netdev_hw_addr *ha; + + i = 0; + netdev_for_each_mc_addr(ha, ndev) { + if (i >= XAE_MULTICAST_CAM_TABLE_NUM) + break; + + af0reg = (ha->addr[0]); + af0reg |= (ha->addr[1] << 8); + af0reg |= (ha->addr[2] << 16); + af0reg |= (ha->addr[3] << 24); + + af1reg = (ha->addr[4]); + af1reg |= (ha->addr[5] << 8); + + reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; + reg |= i; + + axienet_iow(lp, XAE_FMI_OFFSET, reg); + axienet_iow(lp, XAE_AF0_OFFSET, af0reg); + axienet_iow(lp, XAE_AF1_OFFSET, af1reg); + i++; + } + } else { + reg = axienet_ior(lp, XAE_FMI_OFFSET); + reg &= ~XAE_FMI_PM_MASK; + + axienet_iow(lp, XAE_FMI_OFFSET, reg); + + for (i = 0; i < XAE_MULTICAST_CAM_TABLE_NUM; i++) { + reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; + reg |= i; + + axienet_iow(lp, XAE_FMI_OFFSET, reg); + axienet_iow(lp, XAE_AF0_OFFSET, 0); + axienet_iow(lp, XAE_AF1_OFFSET, 0); + } + + dev_info(&ndev->dev, "Promiscuous mode disabled.\n"); + } +} + +/** + * axienet_setoptions - Set an Axi Ethernet option + * @ndev: Pointer to the net_device structure + * @options: Option to be enabled/disabled + * + * The Axi Ethernet core has multiple features which can be selectively turned + * on or off. The typical options could be jumbo frame option, basic VLAN + * option, promiscuous mode option etc. This function is used to set or clear + * these options in the Axi Ethernet hardware. This is done through + * axienet_option structure . + */ +static void axienet_setoptions(struct net_device *ndev, u32 options) +{ + int reg; + struct axienet_local *lp = netdev_priv(ndev); + struct axienet_option *tp = &axienet_options[0]; + + while (tp->opt) { + reg = ((axienet_ior(lp, tp->reg)) & ~(tp->m_or)); + if (options & tp->opt) + reg |= tp->m_or; + axienet_iow(lp, tp->reg, reg); + tp++; + } + + lp->options |= options; +} + +static void __axienet_device_reset(struct axienet_local *lp, + struct device *dev, off_t offset) +{ + u32 timeout; + /* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset + * process of Axi DMA takes a while to complete as all pending + * commands/transfers will be flushed or completed during this + * reset process. */ + axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK); + timeout = DELAY_OF_ONE_MILLISEC; + while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) { + udelay(1); + if (--timeout == 0) { + dev_err(dev, "axienet_device_reset DMA " + "reset timeout!\n"); + break; + } + } +} + +/** + * axienet_device_reset - Reset and initialize the Axi Ethernet hardware. + * @ndev: Pointer to the net_device structure + * + * This function is called to reset and initialize the Axi Ethernet core. This + * is typically called during initialization. It does a reset of the Axi DMA + * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines + * areconnected to Axi Ethernet reset lines, this in turn resets the Axi + * Ethernet core. No separate hardware reset is done for the Axi Ethernet + * core. + */ +static void axienet_device_reset(struct net_device *ndev) +{ + u32 axienet_status; + struct axienet_local *lp = netdev_priv(ndev); + + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET); + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET); + + lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE; + lp->options &= (~XAE_OPTION_JUMBO); + + if ((ndev->mtu > XAE_MTU) && + (ndev->mtu <= XAE_JUMBO_MTU) && + (lp->jumbo_support)) { + lp->max_frm_size = ndev->mtu + XAE_HDR_VLAN_SIZE + + XAE_TRL_SIZE; + lp->options |= XAE_OPTION_JUMBO; + } + + if (axienet_dma_bd_init(ndev)) { + dev_err(&ndev->dev, "axienet_device_reset descriptor " + "allocation failed\n"); + } + + axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); + axienet_status &= ~XAE_RCW1_RX_MASK; + axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); + + axienet_status = axienet_ior(lp, XAE_IP_OFFSET); + if (axienet_status & XAE_INT_RXRJECT_MASK) + axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); + + axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); + + /* Sync default options with HW but leave receiver and + * transmitter disabled.*/ + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + axienet_set_mac_address(ndev, NULL); + axienet_set_multicast_list(ndev); + axienet_setoptions(ndev, lp->options); + + ndev->trans_start = jiffies; +} + +/** + * axienet_adjust_link - Adjust the PHY link speed/duplex. + * @ndev: Pointer to the net_device structure + * + * This function is called to change the speed and duplex setting after + * auto negotiation is done by the PHY. This is the function that gets + * registered with the PHY interface through the "of_phy_connect" call. + */ +static void axienet_adjust_link(struct net_device *ndev) +{ + u32 emmc_reg; + u32 link_state; + u32 setspeed = 1; + struct axienet_local *lp = netdev_priv(ndev); + struct phy_device *phy = lp->phy_dev; + + link_state = phy->speed | (phy->duplex << 1) | phy->link; + if (lp->last_link != link_state) { + if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) { + if (lp->phy_type == XAE_PHY_TYPE_1000BASE_X) + setspeed = 0; + } else { + if ((phy->speed == SPEED_1000) && + (lp->phy_type == XAE_PHY_TYPE_MII)) + setspeed = 0; + } + + if (setspeed == 1) { + emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET); + emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK; + + switch (phy->speed) { + case SPEED_1000: + emmc_reg |= XAE_EMMC_LINKSPD_1000; + break; + case SPEED_100: + emmc_reg |= XAE_EMMC_LINKSPD_100; + break; + case SPEED_10: + emmc_reg |= XAE_EMMC_LINKSPD_10; + break; + default: + dev_err(&ndev->dev, "Speed other than 10, 100 " + "or 1Gbps is not supported\n"); + break; + } + + axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg); + lp->last_link = link_state; + phy_print_status(phy); + } else { + dev_err(&ndev->dev, "Error setting Axi Ethernet " + "mac speed\n"); + } + } +} + +/** + * axienet_start_xmit_done - Invoked once a transmit is completed by the + * Axi DMA Tx channel. + * @ndev: Pointer to the net_device structure + * + * This function is invoked from the Axi DMA Tx isr to notify the completion + * of transmit operation. It clears fields in the corresponding Tx BDs and + * unmaps the corresponding buffer so that CPU can regain ownership of the + * buffer. It finally invokes "netif_wake_queue" to restart transmission if + * required. + */ +static void axienet_start_xmit_done(struct net_device *ndev) +{ + u32 size = 0; + u32 packets = 0; + struct axienet_local *lp = netdev_priv(ndev); + struct axidma_bd *cur_p; + unsigned int status = 0; + + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + status = cur_p->status; + while (status & XAXIDMA_BD_STS_COMPLETE_MASK) { + dma_unmap_single(ndev->dev.parent, cur_p->phys, + (cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK), + DMA_TO_DEVICE); + if (cur_p->app4) + dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); + /*cur_p->phys = 0;*/ + cur_p->app0 = 0; + cur_p->app1 = 0; + cur_p->app2 = 0; + cur_p->app4 = 0; + cur_p->status = 0; + + size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK; + packets++; + + lp->tx_bd_ci = ++lp->tx_bd_ci % TX_BD_NUM; + cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; + status = cur_p->status; + } + + ndev->stats.tx_packets += packets; + ndev->stats.tx_bytes += size; + netif_wake_queue(ndev); +} + +/** + * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy + * @lp: Pointer to the axienet_local structure + * @num_frag: The number of BDs to check for + * + * returns: 0, on success + * NETDEV_TX_BUSY, if any of the descriptors are not free + * + * This function is invoked before BDs are allocated and transmission starts. + * This function returns 0 if a BD or group of BDs can be allocated for + * transmission. If the BD or any of the BDs are not free the function + * returns a busy status. This is invoked from axienet_start_xmit. + */ +static inline int axienet_check_tx_bd_space(struct axienet_local *lp, + int num_frag) +{ + struct axidma_bd *cur_p; + cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % TX_BD_NUM]; + if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK) + return NETDEV_TX_BUSY; + return 0; +} + +/** + * axienet_start_xmit - Starts the transmission. + * @skb: sk_buff pointer that contains data to be Txed. + * @ndev: Pointer to net_device structure. + * + * returns: NETDEV_TX_OK, on success + * NETDEV_TX_BUSY, if any of the descriptors are not free + * + * This function is invoked from upper layers to initiate transmission. The + * function uses the next available free BDs and populates their fields to + * start the transmission. Additionally if checksum offloading is supported, + * it populates AXI Stream Control fields with appropriate values. + */ +static int axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) +{ + u32 ii; + u32 num_frag; + u32 csum_start_off; + u32 csum_index_off; + skb_frag_t *frag; + dma_addr_t tail_p; + struct axienet_local *lp = netdev_priv(ndev); + struct axidma_bd *cur_p; + + num_frag = skb_shinfo(skb)->nr_frags; + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + + if (axienet_check_tx_bd_space(lp, num_frag)) { + if (!netif_queue_stopped(ndev)) + netif_stop_queue(ndev); + return NETDEV_TX_BUSY; + } + + if (skb->ip_summed == CHECKSUM_PARTIAL) { + if (lp->features & XAE_FEATURE_FULL_TX_CSUM) { + /* Tx Full Checksum Offload Enabled */ + cur_p->app0 |= 2; + } else if (lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) { + csum_start_off = skb_transport_offset(skb); + csum_index_off = csum_start_off + skb->csum_offset; + /* Tx Partial Checksum Offload Enabled */ + cur_p->app0 |= 1; + cur_p->app1 = (csum_start_off << 16) | csum_index_off; + } + } else if (skb->ip_summed == CHECKSUM_UNNECESSARY) { + cur_p->app0 |= 2; /* Tx Full Checksum Offload Enabled */ + } + + cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK; + cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + + for (ii = 0; ii < num_frag; ii++) { + lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM; + cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; + frag = &skb_shinfo(skb)->frags[ii]; + cur_p->phys = dma_map_single(ndev->dev.parent, + skb_frag_address(frag), + skb_frag_size(frag), + DMA_TO_DEVICE); + cur_p->cntrl = skb_frag_size(frag); + } + + cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK; + cur_p->app4 = (unsigned long)skb; + + tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; + /* Start the transfer */ + axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p); + lp->tx_bd_tail = ++lp->tx_bd_tail % TX_BD_NUM; + + return NETDEV_TX_OK; +} + +/** + * axienet_recv - Is called from Axi DMA Rx Isr to complete the received + * BD processing. + * @ndev: Pointer to net_device structure. + * + * This function is invoked from the Axi DMA Rx isr to process the Rx BDs. It + * does minimal processing and invokes "netif_rx" to complete further + * processing. + */ +static void axienet_recv(struct net_device *ndev) +{ + u32 length; + u32 csumstatus; + u32 size = 0; + u32 packets = 0; + dma_addr_t tail_p; + struct axienet_local *lp = netdev_priv(ndev); + struct sk_buff *skb, *new_skb; + struct axidma_bd *cur_p; + + tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci; + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + + while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) { + skb = (struct sk_buff *) (cur_p->sw_id_offset); + length = cur_p->app4 & 0x0000FFFF; + + dma_unmap_single(ndev->dev.parent, cur_p->phys, + lp->max_frm_size, + DMA_FROM_DEVICE); + + skb_put(skb, length); + skb->protocol = eth_type_trans(skb, ndev); + /*skb_checksum_none_assert(skb);*/ + skb->ip_summed = CHECKSUM_NONE; + + /* if we're doing Rx csum offload, set it up */ + if (lp->features & XAE_FEATURE_FULL_RX_CSUM) { + csumstatus = (cur_p->app2 & + XAE_FULL_CSUM_STATUS_MASK) >> 3; + if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) || + (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 && + skb->protocol == __constant_htons(ETH_P_IP) && + skb->len > 64) { + skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF); + skb->ip_summed = CHECKSUM_COMPLETE; + } + + netif_rx(skb); + + size += length; + packets++; + + new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); + if (!new_skb) { + dev_err(&ndev->dev, "no memory for new sk_buff\n"); + return; + } + cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data, + lp->max_frm_size, + DMA_FROM_DEVICE); + cur_p->cntrl = lp->max_frm_size; + cur_p->status = 0; + cur_p->sw_id_offset = (u32) new_skb; + + lp->rx_bd_ci = ++lp->rx_bd_ci % RX_BD_NUM; + cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; + } + + ndev->stats.rx_packets += packets; + ndev->stats.rx_bytes += size; + + axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p); +} + +/** + * axienet_tx_irq - Tx Done Isr. + * @irq: irq number + * @_ndev: net_device pointer + * + * returns: IRQ_HANDLED for all cases. + * + * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done" + * to complete the BD processing. + */ +static irqreturn_t axienet_tx_irq(int irq, void *_ndev) +{ + u32 cr; + unsigned int status; + struct net_device *ndev = _ndev; + struct axienet_local *lp = netdev_priv(ndev); + + status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); + if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { + axienet_start_xmit_done(lp->ndev); + goto out; + } + if (!(status & XAXIDMA_IRQ_ALL_MASK)) + dev_err(&ndev->dev, "No interrupts asserted in Tx path"); + if (status & XAXIDMA_IRQ_ERROR_MASK) { + dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status); + dev_err(&ndev->dev, "Current BD is at: 0x%x\n", + (lp->tx_bd_v[lp->tx_bd_ci]).phys); + + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* Write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* Write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + tasklet_schedule(&lp->dma_err_tasklet); + } +out: + axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status); + return IRQ_HANDLED; +} + +/** + * axienet_rx_irq - Rx Isr. + * @irq: irq number + * @_ndev: net_device pointer + * + * returns: IRQ_HANDLED for all cases. + * + * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD + * processing. + */ +static irqreturn_t axienet_rx_irq(int irq, void *_ndev) +{ + u32 cr; + unsigned int status; + struct net_device *ndev = _ndev; + struct axienet_local *lp = netdev_priv(ndev); + + status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); + if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { + axienet_recv(lp->ndev); + goto out; + } + if (!(status & XAXIDMA_IRQ_ALL_MASK)) + dev_err(&ndev->dev, "No interrupts asserted in Rx path"); + if (status & XAXIDMA_IRQ_ERROR_MASK) { + dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status); + dev_err(&ndev->dev, "Current BD is at: 0x%x\n", + (lp->rx_bd_v[lp->rx_bd_ci]).phys); + + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* Finally write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Disable coalesce, delay timer and error interrupts */ + cr &= (~XAXIDMA_IRQ_ALL_MASK); + /* write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + tasklet_schedule(&lp->dma_err_tasklet); + } +out: + axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status); + return IRQ_HANDLED; +} + +/** + * axienet_open - Driver open routine. + * @ndev: Pointer to net_device structure + * + * returns: 0, on success. + * -ENODEV, if PHY cannot be connected to + * non-zero error value on failure + * + * This is the driver open routine. It calls phy_start to start the PHY device. + * It also allocates interrupt service routines, enables the interrupt lines + * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer + * descriptors are initialized. + */ +static int axienet_open(struct net_device *ndev) +{ + int ret, mdio_mcreg; + struct axienet_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "axienet_open()\n"); + + mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + /* Disable the MDIO interface till Axi Ethernet Reset is completed. + * When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. If MDIO is not disabled when the reset + * process is started, MDIO will be broken afterwards. */ + axienet_iow(lp, XAE_MDIO_MC_OFFSET, + (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK))); + axienet_device_reset(ndev); + /* Enable the MDIO */ + axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + if (lp->phy_node) { + lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node, + axienet_adjust_link, 0, + PHY_INTERFACE_MODE_GMII); + if (!lp->phy_dev) { + dev_err(lp->dev, "of_phy_connect() failed\n"); + return -ENODEV; + } + phy_start(lp->phy_dev); + } + + /* Enable interrupts for Axi DMA Tx */ + ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); + if (ret) + goto err_tx_irq; + /* Enable interrupts for Axi DMA Rx */ + ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); + if (ret) + goto err_rx_irq; + /* Enable tasklets for Axi DMA error handling */ + tasklet_enable(&lp->dma_err_tasklet); + return 0; + +err_rx_irq: + free_irq(lp->tx_irq, ndev); +err_tx_irq: + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + dev_err(lp->dev, "request_irq() failed\n"); + return ret; +} + +/** + * axienet_stop - Driver stop routine. + * @ndev: Pointer to net_device structure + * + * returns: 0, on success. + * + * This is the driver stop routine. It calls phy_disconnect to stop the PHY + * device. It also removes the interrupt handlers and disables the interrupts. + * The Axi DMA Tx/Rx BDs are released. + */ +static int axienet_stop(struct net_device *ndev) +{ + u32 cr; + struct axienet_local *lp = netdev_priv(ndev); + + dev_dbg(&ndev->dev, "axienet_close()\n"); + + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, + cr & (~XAXIDMA_CR_RUNSTOP_MASK)); + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, + cr & (~XAXIDMA_CR_RUNSTOP_MASK)); + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + + tasklet_disable(&lp->dma_err_tasklet); + + free_irq(lp->tx_irq, ndev); + free_irq(lp->rx_irq, ndev); + + if (lp->phy_dev) + phy_disconnect(lp->phy_dev); + lp->phy_dev = NULL; + + axienet_dma_bd_release(ndev); + return 0; +} + +/** + * axienet_change_mtu - Driver change mtu routine. + * @ndev: Pointer to net_device structure + * @new_mtu: New mtu value to be applied + * + * returns: Always returns 0 (success). + * + * This is the change mtu driver routine. It checks if the Axi Ethernet + * hardware supports jumbo frames before changing the mtu. This can be + * called only when the device is not up. + */ +static int axienet_change_mtu(struct net_device *ndev, int new_mtu) +{ + struct axienet_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) + return -EBUSY; + if (lp->jumbo_support) { + if ((new_mtu > XAE_JUMBO_MTU) || (new_mtu < 64)) + return -EINVAL; + ndev->mtu = new_mtu; + } else { + if ((new_mtu > XAE_MTU) || (new_mtu < 64)) + return -EINVAL; + ndev->mtu = new_mtu; + } + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * axienet_poll_controller - Axi Ethernet poll mechanism. + * @ndev: Pointer to net_device structure + * + * This implements Rx/Tx ISR poll mechanisms. The interrupts are disabled prior + * to polling the ISRs and are enabled back after the polling is done. + */ +static void axienet_poll_controller(struct net_device *ndev) +{ + struct axienet_local *lp = netdev_priv(ndev); + disable_irq(lp->tx_irq); + disable_irq(lp->rx_irq); + axienet_rx_irq(lp->tx_irq, ndev); + axienet_tx_irq(lp->rx_irq, ndev); + enable_irq(lp->tx_irq); + enable_irq(lp->rx_irq); +} +#endif + +static const struct net_device_ops axienet_netdev_ops = { + .ndo_open = axienet_open, + .ndo_stop = axienet_stop, + .ndo_start_xmit = axienet_start_xmit, + .ndo_change_mtu = axienet_change_mtu, + .ndo_set_mac_address = netdev_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = axienet_set_multicast_list, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = axienet_poll_controller, +#endif +}; + +/** + * axienet_ethtools_get_settings - Get Axi Ethernet settings related to PHY. + * @ndev: Pointer to net_device structure + * @ecmd: Pointer to ethtool_cmd structure + * + * This implements ethtool command for getting PHY settings. If PHY could + * not be found, the function returns -ENODEV. This function calls the + * relevant PHY ethtool API to get the PHY settings. + * Issue "ethtool ethX" under linux prompt to execute this function. + */ +static int axienet_ethtools_get_settings(struct net_device *ndev, + struct ethtool_cmd *ecmd) +{ + struct axienet_local *lp = netdev_priv(ndev); + struct phy_device *phydev = lp->phy_dev; + if (!phydev) + return -ENODEV; + return phy_ethtool_gset(phydev, ecmd); +} + +/** + * axienet_ethtools_set_settings - Set PHY settings as passed in the argument. + * @ndev: Pointer to net_device structure + * @ecmd: Pointer to ethtool_cmd structure + * + * This implements ethtool command for setting various PHY settings. If PHY + * could not be found, the function returns -ENODEV. This function calls the + * relevant PHY ethtool API to set the PHY. + * Issue e.g. "ethtool -s ethX speed 1000" under linux prompt to execute this + * function. + */ +static int axienet_ethtools_set_settings(struct net_device *ndev, + struct ethtool_cmd *ecmd) +{ + struct axienet_local *lp = netdev_priv(ndev); + struct phy_device *phydev = lp->phy_dev; + if (!phydev) + return -ENODEV; + return phy_ethtool_sset(phydev, ecmd); +} + +/** + * axienet_ethtools_get_drvinfo - Get various Axi Ethernet driver information. + * @ndev: Pointer to net_device structure + * @ed: Pointer to ethtool_drvinfo structure + * + * This implements ethtool command for getting the driver information. + * Issue "ethtool -i ethX" under linux prompt to execute this function. + */ +static void axienet_ethtools_get_drvinfo(struct net_device *ndev, + struct ethtool_drvinfo *ed) +{ + memset(ed, 0, sizeof(struct ethtool_drvinfo)); + strcpy(ed->driver, DRIVER_NAME); + strcpy(ed->version, DRIVER_VERSION); + ed->regdump_len = sizeof(u32) * AXIENET_REGS_N; +} + +/** + * axienet_ethtools_get_regs_len - Get the total regs length present in the + * AxiEthernet core. + * @ndev: Pointer to net_device structure + * + * This implements ethtool command for getting the total register length + * information. + */ +static int axienet_ethtools_get_regs_len(struct net_device *ndev) +{ + return sizeof(u32) * AXIENET_REGS_N; +} + +/** + * axienet_ethtools_get_regs - Dump the contents of all registers present + * in AxiEthernet core. + * @ndev: Pointer to net_device structure + * @regs: Pointer to ethtool_regs structure + * @ret: Void pointer used to return the contents of the registers. + * + * This implements ethtool command for getting the Axi Ethernet register dump. + * Issue "ethtool -d ethX" to execute this function. + */ +static void axienet_ethtools_get_regs(struct net_device *ndev, + struct ethtool_regs *regs, void *ret) +{ + u32 *data = (u32 *) ret; + size_t len = sizeof(u32) * AXIENET_REGS_N; + struct axienet_local *lp = netdev_priv(ndev); + + regs->version = 0; + regs->len = len; + + memset(data, 0, len); + data[0] = axienet_ior(lp, XAE_RAF_OFFSET); + data[1] = axienet_ior(lp, XAE_TPF_OFFSET); + data[2] = axienet_ior(lp, XAE_IFGP_OFFSET); + data[3] = axienet_ior(lp, XAE_IS_OFFSET); + data[4] = axienet_ior(lp, XAE_IP_OFFSET); + data[5] = axienet_ior(lp, XAE_IE_OFFSET); + data[6] = axienet_ior(lp, XAE_TTAG_OFFSET); + data[7] = axienet_ior(lp, XAE_RTAG_OFFSET); + data[8] = axienet_ior(lp, XAE_UAWL_OFFSET); + data[9] = axienet_ior(lp, XAE_UAWU_OFFSET); + data[10] = axienet_ior(lp, XAE_TPID0_OFFSET); + data[11] = axienet_ior(lp, XAE_TPID1_OFFSET); + data[12] = axienet_ior(lp, XAE_PPST_OFFSET); + data[13] = axienet_ior(lp, XAE_RCW0_OFFSET); + data[14] = axienet_ior(lp, XAE_RCW1_OFFSET); + data[15] = axienet_ior(lp, XAE_TC_OFFSET); + data[16] = axienet_ior(lp, XAE_FCC_OFFSET); + data[17] = axienet_ior(lp, XAE_EMMC_OFFSET); + data[18] = axienet_ior(lp, XAE_PHYC_OFFSET); + data[19] = axienet_ior(lp, XAE_MDIO_MC_OFFSET); + data[20] = axienet_ior(lp, XAE_MDIO_MCR_OFFSET); + data[21] = axienet_ior(lp, XAE_MDIO_MWD_OFFSET); + data[22] = axienet_ior(lp, XAE_MDIO_MRD_OFFSET); + data[23] = axienet_ior(lp, XAE_MDIO_MIS_OFFSET); + data[24] = axienet_ior(lp, XAE_MDIO_MIP_OFFSET); + data[25] = axienet_ior(lp, XAE_MDIO_MIE_OFFSET); + data[26] = axienet_ior(lp, XAE_MDIO_MIC_OFFSET); + data[27] = axienet_ior(lp, XAE_UAW0_OFFSET); + data[28] = axienet_ior(lp, XAE_UAW1_OFFSET); + data[29] = axienet_ior(lp, XAE_FMI_OFFSET); + data[30] = axienet_ior(lp, XAE_AF0_OFFSET); + data[31] = axienet_ior(lp, XAE_AF1_OFFSET); +} + +/** + * axienet_ethtools_get_pauseparam - Get the pause parameter setting for + * Tx and Rx paths. + * @ndev: Pointer to net_device structure + * @epauseparm: Pointer to ethtool_pauseparam structure. + * + * This implements ethtool command for getting axi ethernet pause frame + * setting. Issue "ethtool -a ethX" to execute this function. + */ +static void +axienet_ethtools_get_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *epauseparm) +{ + u32 regval; + struct axienet_local *lp = netdev_priv(ndev); + epauseparm->autoneg = 0; + regval = axienet_ior(lp, XAE_FCC_OFFSET); + epauseparm->tx_pause = regval & XAE_FCC_FCTX_MASK; + epauseparm->rx_pause = regval & XAE_FCC_FCRX_MASK; +} + +/** + * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control) + * settings. + * @ndev: Pointer to net_device structure + * @epauseparam:Pointer to ethtool_pauseparam structure + * + * This implements ethtool command for enabling flow control on Rx and Tx + * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this + * function. + */ +static int +axienet_ethtools_set_pauseparam(struct net_device *ndev, + struct ethtool_pauseparam *epauseparm) +{ + u32 regval = 0; + struct axienet_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) { + printk(KERN_ERR "%s: Please stop netif before applying " + "configruation\n", ndev->name); + return -EFAULT; + } + + regval = axienet_ior(lp, XAE_FCC_OFFSET); + if (epauseparm->tx_pause) + regval |= XAE_FCC_FCTX_MASK; + else + regval &= ~XAE_FCC_FCTX_MASK; + if (epauseparm->rx_pause) + regval |= XAE_FCC_FCRX_MASK; + else + regval &= ~XAE_FCC_FCRX_MASK; + axienet_iow(lp, XAE_FCC_OFFSET, regval); + + return 0; +} + +/** + * axienet_ethtools_get_coalesce - Get DMA interrupt coalescing count. + * @ndev: Pointer to net_device structure + * @ecoalesce: Pointer to ethtool_coalesce structure + * + * This implements ethtool command for getting the DMA interrupt coalescing + * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to + * execute this function. + */ +static int axienet_ethtools_get_coalesce(struct net_device *ndev, + struct ethtool_coalesce *ecoalesce) +{ + u32 regval = 0; + struct axienet_local *lp = netdev_priv(ndev); + regval = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + ecoalesce->rx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) + >> XAXIDMA_COALESCE_SHIFT; + regval = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + ecoalesce->tx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) + >> XAXIDMA_COALESCE_SHIFT; + return 0; +} + +/** + * axienet_ethtools_set_coalesce - Set DMA interrupt coalescing count. + * @ndev: Pointer to net_device structure + * @ecoalesce: Pointer to ethtool_coalesce structure + * + * This implements ethtool command for setting the DMA interrupt coalescing + * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux + * prompt to execute this function. + */ +static int axienet_ethtools_set_coalesce(struct net_device *ndev, + struct ethtool_coalesce *ecoalesce) +{ + struct axienet_local *lp = netdev_priv(ndev); + + if (netif_running(ndev)) { + printk(KERN_ERR "%s: Please stop netif before applying " + "configruation\n", ndev->name); + return -EFAULT; + } + + if ((ecoalesce->rx_coalesce_usecs) || + (ecoalesce->rx_coalesce_usecs_irq) || + (ecoalesce->rx_max_coalesced_frames_irq) || + (ecoalesce->tx_coalesce_usecs) || + (ecoalesce->tx_coalesce_usecs_irq) || + (ecoalesce->tx_max_coalesced_frames_irq) || + (ecoalesce->stats_block_coalesce_usecs) || + (ecoalesce->use_adaptive_rx_coalesce) || + (ecoalesce->use_adaptive_tx_coalesce) || + (ecoalesce->pkt_rate_low) || + (ecoalesce->rx_coalesce_usecs_low) || + (ecoalesce->rx_max_coalesced_frames_low) || + (ecoalesce->tx_coalesce_usecs_low) || + (ecoalesce->tx_max_coalesced_frames_low) || + (ecoalesce->pkt_rate_high) || + (ecoalesce->rx_coalesce_usecs_high) || + (ecoalesce->rx_max_coalesced_frames_high) || + (ecoalesce->tx_coalesce_usecs_high) || + (ecoalesce->tx_max_coalesced_frames_high) || + (ecoalesce->rate_sample_interval)) + return -EOPNOTSUPP; + if (ecoalesce->rx_max_coalesced_frames) + lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames; + if (ecoalesce->tx_max_coalesced_frames) + lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames; + + return 0; +} + +static struct ethtool_ops axienet_ethtool_ops = { + .get_settings = axienet_ethtools_get_settings, + .set_settings = axienet_ethtools_set_settings, + .get_drvinfo = axienet_ethtools_get_drvinfo, + .get_regs_len = axienet_ethtools_get_regs_len, + .get_regs = axienet_ethtools_get_regs, + .get_link = ethtool_op_get_link, + .get_pauseparam = axienet_ethtools_get_pauseparam, + .set_pauseparam = axienet_ethtools_set_pauseparam, + .get_coalesce = axienet_ethtools_get_coalesce, + .set_coalesce = axienet_ethtools_set_coalesce, +}; + +/** + * axienet_dma_err_handler - Tasklet handler for Axi DMA Error + * @data: Data passed + * + * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the + * Tx/Rx BDs. + */ +static void axienet_dma_err_handler(unsigned long data) +{ + u32 axienet_status; + u32 cr, i; + int mdio_mcreg; + struct axienet_local *lp = (struct axienet_local *) data; + struct net_device *ndev = lp->ndev; + struct axidma_bd *cur_p; + + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); + axienet_mdio_wait_until_ready(lp); + /* Disable the MDIO interface till Axi Ethernet Reset is completed. + * When we do an Axi Ethernet reset, it resets the complete core + * including the MDIO. So if MDIO is not disabled when the reset + * process is started, MDIO will be broken afterwards. */ + axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg & + ~XAE_MDIO_MC_MDIOEN_MASK)); + + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_TX_CR_OFFSET); + __axienet_device_reset(lp, &ndev->dev, XAXIDMA_RX_CR_OFFSET); + + axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); + axienet_mdio_wait_until_ready(lp); + + for (i = 0; i < TX_BD_NUM; i++) { + cur_p = &lp->tx_bd_v[i]; + if (cur_p->phys) + dma_unmap_single(ndev->dev.parent, cur_p->phys, + (cur_p->cntrl & + XAXIDMA_BD_CTRL_LENGTH_MASK), + DMA_TO_DEVICE); + if (cur_p->app4) + dev_kfree_skb_irq((struct sk_buff *) cur_p->app4); + cur_p->phys = 0; + cur_p->cntrl = 0; + cur_p->status = 0; + cur_p->app0 = 0; + cur_p->app1 = 0; + cur_p->app2 = 0; + cur_p->app3 = 0; + cur_p->app4 = 0; + cur_p->sw_id_offset = 0; + } + + for (i = 0; i < RX_BD_NUM; i++) { + cur_p = &lp->rx_bd_v[i]; + cur_p->status = 0; + cur_p->app0 = 0; + cur_p->app1 = 0; + cur_p->app2 = 0; + cur_p->app3 = 0; + cur_p->app4 = 0; + } + + lp->tx_bd_ci = 0; + lp->tx_bd_tail = 0; + lp->rx_bd_ci = 0; + + /* Start updating the Rx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = ((cr & ~XAXIDMA_COALESCE_MASK) | + (XAXIDMA_DFT_RX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = ((cr & ~XAXIDMA_DELAY_MASK) | + (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Finally write to the Rx channel control register */ + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); + + /* Start updating the Tx channel control register */ + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + /* Update the interrupt coalesce count */ + cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | + (XAXIDMA_DFT_TX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); + /* Update the delay timer count */ + cr = (((cr & ~XAXIDMA_DELAY_MASK)) | + (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); + /* Enable coalesce, delay timer and error interrupts */ + cr |= XAXIDMA_IRQ_ALL_MASK; + /* Finally write to the Tx channel control register */ + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); + + /* Populate the tail pointer and bring the Rx Axi DMA engine out of + * halted state. This will make the Rx side ready for reception.*/ + axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); + + /* Write to the RS (Run-stop) bit in the Tx channel control register. + * Tx channel is now ready to run. But only after we write to the + * tail pointer register that the Tx channel will start transmitting */ + axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); + cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); + axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, + cr | XAXIDMA_CR_RUNSTOP_MASK); + + axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); + axienet_status &= ~XAE_RCW1_RX_MASK; + axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); + + axienet_status = axienet_ior(lp, XAE_IP_OFFSET); + if (axienet_status & XAE_INT_RXRJECT_MASK) + axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); + axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); + + /* Sync default options with HW but leave receiver and + * transmitter disabled.*/ + axienet_setoptions(ndev, lp->options & + ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); + axienet_set_mac_address(ndev, NULL); + axienet_set_multicast_list(ndev); + axienet_setoptions(ndev, lp->options); +} + +/** + * axienet_of_probe - Axi Ethernet probe function. + * @op: Pointer to platform device structure. + * @match: Pointer to device id structure + * + * returns: 0, on success + * Non-zero error value on failure. + * + * This is the probe routine for Axi Ethernet driver. This is called before + * any other driver routines are invoked. It allocates and sets up the Ethernet + * device. Parses through device tree and populates fields of + * axienet_local. It registers the Ethernet device. + */ +static int __devinit axienet_of_probe(struct platform_device *op) +{ + __be32 *p; + int size, ret = 0; + struct device_node *np; + struct axienet_local *lp; + struct net_device *ndev; + const void *addr; + + ndev = alloc_etherdev(sizeof(*lp)); + if (!ndev) { + dev_err(&op->dev, "could not allocate device.\n"); + return -ENOMEM; + } + + ether_setup(ndev); + dev_set_drvdata(&op->dev, ndev); + + SET_NETDEV_DEV(ndev, &op->dev); + ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ + ndev->features = NETIF_F_SG | NETIF_F_FRAGLIST; + ndev->netdev_ops = &axienet_netdev_ops; + ndev->ethtool_ops = &axienet_ethtool_ops; + + lp = netdev_priv(ndev); + lp->ndev = ndev; + lp->dev = &op->dev; + lp->options = XAE_OPTION_DEFAULTS; + /* Map device registers */ + lp->regs = of_iomap(op->dev.of_node, 0); + if (!lp->regs) { + dev_err(&op->dev, "could not map Axi Ethernet regs.\n"); + goto nodev; + } + /* Setup checksum offload, but default to off if not specified */ + lp->features = 0; + + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,txcsum", NULL); + if (p) { + switch (be32_to_cpup(p)) { + case 1: + lp->csum_offload_on_tx_path = + XAE_FEATURE_PARTIAL_TX_CSUM; + lp->features |= XAE_FEATURE_PARTIAL_TX_CSUM; + /* Can checksum TCP/UDP over IPv4. */ + ndev->features |= NETIF_F_IP_CSUM; + break; + case 2: + lp->csum_offload_on_tx_path = + XAE_FEATURE_FULL_TX_CSUM; + lp->features |= XAE_FEATURE_FULL_TX_CSUM; + /* Can checksum TCP/UDP over IPv4. */ + ndev->features |= NETIF_F_IP_CSUM; + break; + default: + lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD; + } + } + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxcsum", NULL); + if (p) { + switch (be32_to_cpup(p)) { + case 1: + lp->csum_offload_on_rx_path = + XAE_FEATURE_PARTIAL_RX_CSUM; + lp->features |= XAE_FEATURE_PARTIAL_RX_CSUM; + break; + case 2: + lp->csum_offload_on_rx_path = + XAE_FEATURE_FULL_RX_CSUM; + lp->features |= XAE_FEATURE_FULL_RX_CSUM; + break; + default: + lp->csum_offload_on_rx_path = XAE_NO_CSUM_OFFLOAD; + } + } + /* For supporting jumbo frames, the Axi Ethernet hardware must have + * a larger Rx/Tx Memory. Typically, the size must be more than or + * equal to 16384 bytes, so that we can enable jumbo option and start + * supporting jumbo frames. Here we check for memory allocated for + * Rx/Tx in the hardware from the device-tree and accordingly set + * flags. */ + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,rxmem", NULL); + if (p) { + if ((be32_to_cpup(p)) >= 0x4000) + lp->jumbo_support = 1; + } + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,temac-type", + NULL); + if (p) + lp->temac_type = be32_to_cpup(p); + p = (__be32 *) of_get_property(op->dev.of_node, "xlnx,phy-type", NULL); + if (p) + lp->phy_type = be32_to_cpup(p); + + /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ + np = of_parse_phandle(op->dev.of_node, "axistream-connected", 0); + if (!np) { + dev_err(&op->dev, "could not find DMA node\n"); + goto err_iounmap; + } + lp->dma_regs = of_iomap(np, 0); + if (lp->dma_regs) { + dev_dbg(&op->dev, "MEM base: %p\n", lp->dma_regs); + } else { + dev_err(&op->dev, "unable to map DMA registers\n"); + of_node_put(np); + } + lp->rx_irq = irq_of_parse_and_map(np, 1); + lp->tx_irq = irq_of_parse_and_map(np, 0); + of_node_put(np); + if ((lp->rx_irq == NO_IRQ) || (lp->tx_irq == NO_IRQ)) { + dev_err(&op->dev, "could not determine irqs\n"); + ret = -ENOMEM; + goto err_iounmap_2; + } + + /* Retrieve the MAC address */ + addr = of_get_property(op->dev.of_node, "local-mac-address", &size); + if ((!addr) || (size != 6)) { + dev_err(&op->dev, "could not find MAC address\n"); + ret = -ENODEV; + goto err_iounmap_2; + } + axienet_set_mac_address(ndev, (void *) addr); + + lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; + lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; + + lp->phy_node = of_parse_phandle(op->dev.of_node, "phy-handle", 0); + ret = axienet_mdio_setup(lp, op->dev.of_node); + if (ret) + dev_warn(&op->dev, "error registering MDIO bus\n"); + + ret = register_netdev(lp->ndev); + if (ret) { + dev_err(lp->dev, "register_netdev() error (%i)\n", ret); + goto err_iounmap_2; + } + + tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, + (unsigned long) lp); + tasklet_disable(&lp->dma_err_tasklet); + + return 0; + +err_iounmap_2: + if (lp->dma_regs) + iounmap(lp->dma_regs); +err_iounmap: + iounmap(lp->regs); +nodev: + free_netdev(ndev); + ndev = NULL; + return ret; +} + +static int __devexit axienet_of_remove(struct platform_device *op) +{ + struct net_device *ndev = dev_get_drvdata(&op->dev); + struct axienet_local *lp = netdev_priv(ndev); + + axienet_mdio_teardown(lp); + unregister_netdev(ndev); + + if (lp->phy_node) + of_node_put(lp->phy_node); + lp->phy_node = NULL; + + dev_set_drvdata(&op->dev, NULL); + + iounmap(lp->regs); + if (lp->dma_regs) + iounmap(lp->dma_regs); + free_netdev(ndev); + + return 0; +} + +static struct platform_driver axienet_of_driver = { + .probe = axienet_of_probe, + .remove = __devexit_p(axienet_of_remove), + .driver = { + .owner = THIS_MODULE, + .name = "xilinx_axienet", + .of_match_table = axienet_of_match, + }, +}; + +static int __init axienet_init(void) +{ + return platform_driver_register(&axienet_of_driver); +} + +static void __exit axienet_exit(void) +{ + platform_driver_unregister(&axienet_of_driver); +} + +module_init(axienet_init); +module_exit(axienet_exit); + +MODULE_DESCRIPTION("Xilinx Axi Ethernet driver"); +MODULE_AUTHOR("Xilinx"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c new file mode 100644 index 000000000000..d70b6e79f6c0 --- /dev/null +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c @@ -0,0 +1,238 @@ +/* + * MDIO bus driver for the Xilinx Axi Ethernet device + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * Copyright (c) 2010 Xilinx, Inc. All rights reserved. + * Copyright (c) 2012 Daniel Borkmann, + * Copyright (c) 2012 Ariane Keller, + */ + +#include +#include +#include + +#include "xilinx_axienet.h" + +#define MAX_MDIO_FREQ 2500000 /* 2.5 MHz */ +#define DEFAULT_CLOCK_DIVISOR XAE_MDIO_DIV_DFT + +/* Wait till MDIO interface is ready to accept a new transaction.*/ +int axienet_mdio_wait_until_ready(struct axienet_local *lp) +{ + long end = jiffies + 2; + while (!(axienet_ior(lp, XAE_MDIO_MCR_OFFSET) & + XAE_MDIO_MCR_READY_MASK)) { + if (end - jiffies <= 0) { + WARN_ON(1); + return -ETIMEDOUT; + } + udelay(1); + } + return 0; +} + +/** + * axienet_mdio_read - MDIO interface read function + * @bus: Pointer to mii bus structure + * @phy_id: Address of the PHY device + * @reg: PHY register to read + * + * returns: The register contents on success, -ETIMEDOUT on a timeout + * + * Reads the contents of the requested register from the requested PHY + * address by first writing the details into MCR register. After a while + * the register MRD is read to obtain the PHY register content. + */ +static int axienet_mdio_read(struct mii_bus *bus, int phy_id, int reg) +{ + u32 rc; + int ret; + struct axienet_local *lp = bus->priv; + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + axienet_iow(lp, XAE_MDIO_MCR_OFFSET, + (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & + XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_READ_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + rc = axienet_ior(lp, XAE_MDIO_MRD_OFFSET) & 0x0000FFFF; + + dev_dbg(lp->dev, "axienet_mdio_read(phy_id=%i, reg=%x) == %x\n", + phy_id, reg, rc); + + return rc; +} + +/** + * axienet_mdio_write - MDIO interface write function + * @bus: Pointer to mii bus structure + * @phy_id: Address of the PHY device + * @reg: PHY register to write to + * @val: Value to be written into the register + * + * returns: 0 on success, -ETIMEDOUT on a timeout + * + * Writes the value to the requested register by first writing the value + * into MWD register. The the MCR register is then appropriately setup + * to finish the write operation. + */ +static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg, + u16 val) +{ + int ret; + struct axienet_local *lp = bus->priv; + + dev_dbg(lp->dev, "axienet_mdio_write(phy_id=%i, reg=%x, val=%x)\n", + phy_id, reg, val); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + axienet_iow(lp, XAE_MDIO_MWD_OFFSET, (u32) val); + axienet_iow(lp, XAE_MDIO_MCR_OFFSET, + (((phy_id << XAE_MDIO_MCR_PHYAD_SHIFT) & + XAE_MDIO_MCR_PHYAD_MASK) | + ((reg << XAE_MDIO_MCR_REGAD_SHIFT) & + XAE_MDIO_MCR_REGAD_MASK) | + XAE_MDIO_MCR_INITIATE_MASK | + XAE_MDIO_MCR_OP_WRITE_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + return 0; +} + +/** + * axienet_mdio_setup - MDIO setup function + * @lp: Pointer to axienet local data structure. + * @np: Pointer to device node + * + * returns: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when + * mdiobus_alloc (to allocate memory for mii bus structure) fails. + * + * Sets up the MDIO interface by initializing the MDIO clock and enabling the + * MDIO interface in hardware. Register the MDIO interface. + **/ +int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np) +{ + int ret; + u32 clk_div, host_clock; + u32 *property_p; + struct mii_bus *bus; + struct resource res; + struct device_node *np1; + + /* clk_div can be calculated by deriving it from the equation: + * fMDIO = fHOST / ((1 + clk_div) * 2) + * + * Where fMDIO <= 2500000, so we get: + * fHOST / ((1 + clk_div) * 2) <= 2500000 + * + * Then we get: + * 1 / ((1 + clk_div) * 2) <= (2500000 / fHOST) + * + * Then we get: + * 1 / (1 + clk_div) <= ((2500000 * 2) / fHOST) + * + * Then we get: + * 1 / (1 + clk_div) <= (5000000 / fHOST) + * + * So: + * (1 + clk_div) >= (fHOST / 5000000) + * + * And finally: + * clk_div >= (fHOST / 5000000) - 1 + * + * fHOST can be read from the flattened device tree as property + * "clock-frequency" from the CPU + */ + + np1 = of_find_node_by_name(NULL, "cpu"); + if (!np1) { + printk(KERN_WARNING "%s(): Could not find CPU device node.", + __func__); + printk(KERN_WARNING "Setting MDIO clock divisor to " + "default %d\n", DEFAULT_CLOCK_DIVISOR); + clk_div = DEFAULT_CLOCK_DIVISOR; + goto issue; + } + property_p = (u32 *) of_get_property(np1, "clock-frequency", NULL); + if (!property_p) { + printk(KERN_WARNING "%s(): Could not find CPU property: " + "clock-frequency.", __func__); + printk(KERN_WARNING "Setting MDIO clock divisor to " + "default %d\n", DEFAULT_CLOCK_DIVISOR); + clk_div = DEFAULT_CLOCK_DIVISOR; + goto issue; + } + + host_clock = be32_to_cpup(property_p); + clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1; + /* If there is any remainder from the division of + * fHOST / (MAX_MDIO_FREQ * 2), then we need to add + * 1 to the clock divisor or we will surely be above 2.5 MHz */ + if (host_clock % (MAX_MDIO_FREQ * 2)) + clk_div++; + + printk(KERN_DEBUG "%s(): Setting MDIO clock divisor to %u based " + "on %u Hz host clock.\n", __func__, clk_div, host_clock); + + of_node_put(np1); +issue: + axienet_iow(lp, XAE_MDIO_MC_OFFSET, + (((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK)); + + ret = axienet_mdio_wait_until_ready(lp); + if (ret < 0) + return ret; + + bus = mdiobus_alloc(); + if (!bus) + return -ENOMEM; + + np1 = of_get_parent(lp->phy_node); + of_address_to_resource(np1, 0, &res); + snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx", + (unsigned long long) res.start); + + bus->priv = lp; + bus->name = "Xilinx Axi Ethernet MDIO"; + bus->read = axienet_mdio_read; + bus->write = axienet_mdio_write; + bus->parent = lp->dev; + bus->irq = lp->mdio_irqs; /* preallocated IRQ table */ + lp->mii_bus = bus; + + ret = of_mdiobus_register(bus, np1); + if (ret) { + mdiobus_free(bus); + return ret; + } + return 0; +} + +/** + * axienet_mdio_teardown - MDIO remove function + * @lp: Pointer to axienet local data structure. + * + * Unregisters the MDIO and frees any associate memory for mii bus. + */ +void axienet_mdio_teardown(struct axienet_local *lp) +{ + mdiobus_unregister(lp->mii_bus); + kfree(lp->mii_bus->irq); + mdiobus_free(lp->mii_bus); + lp->mii_bus = NULL; +}