From: Mika Båtsman <mbatsman@mvista.com>
Date: Fri, 17 Jun 2016 10:31:37 +0000 (+0300)
Subject: regulator: anatop: allow regulator to be in bypass mode
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=8a092e682f20f193f2070dba2ea1904e95814126;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git

regulator: anatop: allow regulator to be in bypass mode

Bypass support was added in commit d38018f2019c ("regulator: anatop: Add
bypass support to digital LDOs"). A check for valid voltage selectors was
added in commit da0607c8df5c ("regulator: anatop: Fail on invalid voltage
selector") but it also discards all regulators that are in bypass mode. Add
check for the bypass setting. Errors below were seen on a Variscite mx6
board.

anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22
anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22

Fixes: da0607c8df5c ("regulator: anatop: Fail on invalid voltage selector")
Signed-off-by: Mika Båtsman <mbatsman@mvista.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c
index 63cd5e68c864..3a6d0290c54c 100644
--- a/drivers/regulator/anatop-regulator.c
+++ b/drivers/regulator/anatop-regulator.c
@@ -296,7 +296,7 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
 			sreg->sel = 22;
 
-		if (!sreg->sel) {
+		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
 		}