From: Kumar Gala Date: Sat, 3 Sep 2005 22:55:24 +0000 (-0700) Subject: [PATCH] ppc32: Remove board support for MCPN765 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=89d7f53030baa2616eb2fe87cbc19bc73111a78e;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git [PATCH] ppc32: Remove board support for MCPN765 Support for the MCPN765 board is no longer maintained and thus being removed Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 3f8e003ff88..ad6c362a15b 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -613,9 +613,6 @@ config EV64260 config LOPEC bool "Motorola-LoPEC" -config MCPN765 - bool "Motorola-MCPN765" - config MVME5100 bool "Motorola-MVME5100" @@ -790,7 +787,7 @@ config PPC_OF config PPC_GEN550 bool - depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \ + depends on SANDPOINT || SPRUCE || PPLUS || PCORE || \ PRPMC750 || PRPMC800 || LOPEC || \ (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ 83xx diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index 20717193fff..3e187fe0f59 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -106,7 +106,7 @@ zimageinitrd-$(CONFIG_GEMINI) := zImage.initrd-STRIPELF # kconfig 'feature', only one of these will ever be 'y' at a time. # The rest will be unset. -motorola := $(CONFIG_MCPN765)$(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ +motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \ $(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS) motorola := $(strip $(motorola)) pcore := $(CONFIG_PCORE)$(CONFIG_POWERPMC250) diff --git a/arch/ppc/configs/mcpn765_defconfig b/arch/ppc/configs/mcpn765_defconfig deleted file mode 100644 index 899e89a9ea6..00000000000 --- a/arch/ppc/configs/mcpn765_defconfig +++ /dev/null @@ -1,579 +0,0 @@ -# -# Automatically generated make config: don't edit -# -CONFIG_MMU=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -# CONFIG_EXPERIMENTAL is not set -CONFIG_CLEAN_COMPILE=y -CONFIG_STANDALONE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_KMOD is not set - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_ALTIVEC=y -# CONFIG_TAU is not set -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_WILLOW is not set -# CONFIG_PCORE is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_EV64260 is not set -# CONFIG_SPRUCE is not set -# CONFIG_LOPEC is not set -CONFIG_MCPN765=y -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_ADIR is not set -# CONFIG_K2 is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX6 is not set -# CONFIG_TQM8260 is not set -CONFIG_PPC_GEN550=y -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_KERNEL_ELF=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="ip=on" - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_CARMEL is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_IDEDISK_STROKE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -CONFIG_BLK_DEV_ADMA=y -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_DECNET is not set -# CONFIG_BRIDGE is not set -# CONFIG_NETFILTER is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -CONFIG_NETDEVICES=y - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -CONFIG_NET_TULIP=y -CONFIG_TULIP=y -# CONFIG_TULIP_MMIO is not set -# CONFIG_TULIP_NAPI is not set -# CONFIG_DE4X5 is not set -# CONFIG_WINBOND_840 is not set -# CONFIG_DM9102 is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_FDDI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set - -# -# Amateur Radio support -# -# CONFIG_HAMRADIO is not set - -# -# IrDA (infrared) support -# -# CONFIG_IRDA is not set - -# -# Bluetooth support -# -# CONFIG_BT is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Userland interfaces -# - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_QIC02_TAPE is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_FTAPE is not set -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_FAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_HFSPLUS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -CONFIG_CRC32=y - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index fb52acf5daa..2360bdcc79f 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_GEMINI) += gemini_pci.o gemini_setup.o gemini_prom.o obj-$(CONFIG_LOPEC) += lopec.o obj-$(CONFIG_KATANA) += katana.o obj-$(CONFIG_HDPU) += hdpu.o -obj-$(CONFIG_MCPN765) += mcpn765.o obj-$(CONFIG_MENF1) += menf1_setup.o menf1_pci.o obj-$(CONFIG_MVME5100) += mvme5100.o obj-$(CONFIG_PAL4) += pal4_setup.o pal4_pci.o diff --git a/arch/ppc/platforms/mcpn765.c b/arch/ppc/platforms/mcpn765.c deleted file mode 100644 index e88d294ea59..00000000000 --- a/arch/ppc/platforms/mcpn765.c +++ /dev/null @@ -1,527 +0,0 @@ -/* - * arch/ppc/platforms/mcpn765.c - * - * Board setup routines for the Motorola MCG MCPN765 cPCI Board. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * Modified by Randy Vinson (rvinson@mvista.com) - * - * 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * This file adds support for the Motorola MCG MCPN765. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* for linux/serial_core.h */ -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mcpn765.h" - -static u_char mcpn765_openpic_initsenses[] __initdata = { - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE),/* 16: i8259 cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 17: COM1,2,3,4 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 18: Enet 1 (front) */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 19: HAWK WDT XXXX */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 20: 21554 bridge */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 21: cPCI INTA# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 22: cPCI INTB# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 23: cPCI INTC# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 24: cPCI INTD# */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 25: PMC1 INTA#,PMC2 INTB#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 26: PMC1 INTB#,PMC2 INTC#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 27: PMC1 INTC#,PMC2 INTD#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 28: PMC1 INTD#,PMC2 INTA#*/ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 29: Enet 2 (J3) */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 30: Abort Switch */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/* 31: RTC Alarm */ -}; - -extern void mcpn765_set_VIA_IDE_native(void); - -extern u_int openpic_irq(void); -extern char cmd_line[]; - -extern void gen550_progress(char *, unsigned short); -extern void gen550_init(int, struct uart_port *); - -int use_of_interrupt_tree = 0; - -static void mcpn765_halt(void); - -TODC_ALLOC(); - -/* - * Motorola MCG MCPN765 interrupt routing. - */ -static inline int -mcpn765_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - { 14, 0, 0, 0 }, /* IDSEL 11 - have to manually set */ - { 0, 0, 0, 0 }, /* IDSEL 12 - unused */ - { 0, 0, 0, 0 }, /* IDSEL 13 - unused */ - { 18, 0, 0, 0 }, /* IDSEL 14 - Enet 0 */ - { 0, 0, 0, 0 }, /* IDSEL 15 - unused */ - { 25, 26, 27, 28 }, /* IDSEL 16 - PMC Slot 1 */ - { 28, 25, 26, 27 }, /* IDSEL 17 - PMC Slot 2 */ - { 0, 0, 0, 0 }, /* IDSEL 18 - PMC 2B Connector XXXX */ - { 29, 0, 0, 0 }, /* IDSEL 19 - Enet 1 */ - { 20, 0, 0, 0 }, /* IDSEL 20 - 21554 cPCI bridge */ - }; - - const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -void __init -mcpn765_set_VIA_IDE_legacy(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - - unsigned char temp; - - /* put back original "standard" port base addresses */ - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_0, 0x1f1); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_1, 0x3f5); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_2, 0x171); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_3, 0x375); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_4, 0xcc01); - - /* put into legacy mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp &= ~0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -void -mcpn765_set_VIA_IDE_native(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - - unsigned char temp; - - /* put into native mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp |= 0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -/* - * Initialize the VIA 82c586b. - */ -static void __init -mcpn765_setup_via_82c586b(void) -{ - struct pci_dev *dev; - u_char c; - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_0, - NULL)) == NULL) { - printk("No VIA ISA bridge found\n"); - mcpn765_halt(); - /* NOTREACHED */ - } - - /* - * If the firmware left the EISA 4d0/4d1 ports enabled, make sure - * IRQ 14 is set for edge. - */ - pci_read_config_byte(dev, 0x47, &c); - - if (c & (1<<5)) { - c = inb(0x4d1); - c &= ~(1<<6); - outb(c, 0x4d1); - } - - /* Disable PNP IRQ routing since we use the Hawk's MPIC */ - pci_write_config_dword(dev, 0x54, 0); - pci_write_config_byte(dev, 0x58, 0); - - pci_dev_put(dev); - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, - NULL)) == NULL) { - printk("No VIA ISA bridge found\n"); - mcpn765_halt(); - /* NOTREACHED */ - } - - /* - * PPCBug doesn't set the enable bits for the IDE device. - * Turn them on now. - */ - pci_read_config_byte(dev, 0x40, &c); - c |= 0x03; - pci_write_config_byte(dev, 0x40, c); - pci_dev_put(dev); - - return; -} - -void __init -mcpn765_pcibios_fixup(void) -{ - /* Do MCPN765 board specific initialization. */ - mcpn765_setup_via_82c586b(); -} - -void __init -mcpn765_find_bridges(void) -{ - struct pci_controller *hose; - - hose = pcibios_alloc_controller(); - - if (!hose) - return; - - hose->first_busno = 0; - hose->last_busno = 0xff; - hose->pci_mem_offset = MCPN765_PCI_PHY_MEM_OFFSET; - - pci_init_resource(&hose->io_resource, - MCPN765_PCI_IO_START, - MCPN765_PCI_IO_END, - IORESOURCE_IO, - "PCI host bridge"); - - pci_init_resource(&hose->mem_resources[0], - MCPN765_PCI_MEM_START, - MCPN765_PCI_MEM_END, - IORESOURCE_MEM, - "PCI host bridge"); - - hose->io_space.start = MCPN765_PCI_IO_START; - hose->io_space.end = MCPN765_PCI_IO_END; - hose->mem_space.start = MCPN765_PCI_MEM_START; - hose->mem_space.end = MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE; - - if (hawk_init(hose, - MCPN765_HAWK_PPC_REG_BASE, - MCPN765_PROC_PCI_MEM_START, - MCPN765_PROC_PCI_MEM_END - HAWK_MPIC_SIZE, - MCPN765_PROC_PCI_IO_START, - MCPN765_PROC_PCI_IO_END, - MCPN765_PCI_MEM_END - HAWK_MPIC_SIZE + 1) != 0) { - printk("Could not initialize HAWK bridge\n"); - } - - /* VIA IDE BAR decoders are only 16-bits wide. PCI Auto Config - * will reassign the bars outside of 16-bit I/O space, which will - * "break" things. To prevent this, we'll set the IDE chip into - * legacy mode and seed the bars with their legacy addresses (in 16-bit - * I/O space). The Auto Config code will skip the IDE contoller in - * legacy mode, so our bar values will stick. - */ - mcpn765_set_VIA_IDE_legacy(); - - hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); - - /* Now that we've got 16-bit addresses in the bars, we can switch the - * IDE controller back into native mode so we can do "modern" resource - * and interrupt management. - */ - mcpn765_set_VIA_IDE_native(); - - ppc_md.pcibios_fixup = mcpn765_pcibios_fixup; - ppc_md.pcibios_fixup_bus = NULL; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mcpn765_map_irq; - - return; -} -static void __init -mcpn765_setup_arch(void) -{ - struct pci_controller *hose; - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: enter", 0); - - loops_per_jiffy = 50000000 / HZ; - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA2; -#endif - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: find_bridges", 0); - - /* Lookup PCI host bridges */ - mcpn765_find_bridges(); - - hose = pci_bus_to_hose(0); - isa_io_base = (ulong)hose->io_base_virt; - - TODC_INIT(TODC_TYPE_MK48T37, - (MCPN765_PHYS_NVRAM_AS0 - isa_io_base), - (MCPN765_PHYS_NVRAM_AS1 - isa_io_base), - (MCPN765_PHYS_NVRAM_DATA - isa_io_base), - 8); - - OpenPIC_InitSenses = mcpn765_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof(mcpn765_openpic_initsenses); - - printk("Motorola MCG MCPN765 cPCI Non-System Board\n"); - printk("MCPN765 port (MontaVista Software, Inc. (source@mvista.com))\n"); - - if ( ppc_md.progress ) - ppc_md.progress("mcpn765_setup_arch: exit", 0); - - return; -} - -static void __init -mcpn765_init2(void) -{ - - request_region(0x00,0x20,"dma1"); - request_region(0x20,0x20,"pic1"); - request_region(0x40,0x20,"timer"); - request_region(0x80,0x10,"dma page reg"); - request_region(0xa0,0x20,"pic2"); - request_region(0xc0,0x20,"dma2"); - - return; -} - -/* - * Interrupt setup and service. - * Have MPIC on HAWK and cascaded 8259s on VIA 82586 cascaded to MPIC. - */ -static void __init -mcpn765_init_IRQ(void) -{ - int i; - - if ( ppc_md.progress ) - ppc_md.progress("init_irq: enter", 0); - - openpic_init(NUM_8259_INTERRUPTS); - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - - for(i=0; i < NUM_8259_INTERRUPTS; i++) - irq_desc[i].handler = &i8259_pic; - - i8259_init(0); - - if ( ppc_md.progress ) - ppc_md.progress("init_irq: exit", 0); - - return; -} - -static u32 -mcpn765_irq_canonicalize(u32 irq) -{ - if (irq == 2) - return 9; - else - return irq; -} - -static unsigned long __init -mcpn765_find_end_of_memory(void) -{ - return hawk_get_mem_size(MCPN765_HAWK_SMC_BASE); -} - -static void __init -mcpn765_map_io(void) -{ - io_block_mapping(0xfe800000, 0xfe800000, 0x00800000, _PAGE_IO); -} - -static void -mcpn765_reset_board(void) -{ - local_irq_disable(); - - /* set VIA IDE controller into native mode */ - mcpn765_set_VIA_IDE_native(); - - /* Set exception prefix high - to the firmware */ - _nmask_and_or_msr(0, MSR_IP); - - out_8((u_char *)MCPN765_BOARD_MODRST_REG, 0x01); - - return; -} - -static void -mcpn765_restart(char *cmd) -{ - volatile ulong i = 10000000; - - mcpn765_reset_board(); - - while (i-- > 0); - panic("restart failed\n"); -} - -static void -mcpn765_power_off(void) -{ - mcpn765_halt(); - /* NOTREACHED */ -} - -static void -mcpn765_halt(void) -{ - local_irq_disable(); - while (1); - /* NOTREACHED */ -} - -static int -mcpn765_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: Motorola MCG\n"); - seq_printf(m, "machine\t\t: MCPN765\n"); - - return 0; -} - -/* - * Set BAT 3 to map 0xf0000000 to end of physical memory space. - */ -static __inline__ void -mcpn765_set_bat(void) -{ - mb(); - mtspr(SPRN_DBAT1U, 0xfe8000fe); - mtspr(SPRN_DBAT1L, 0xfe80002a); - mb(); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* Map in board regs, etc. */ - mcpn765_set_bat(); - - isa_mem_base = MCPN765_ISA_MEM_BASE; - pci_dram_offset = MCPN765_PCI_DRAM_OFFSET; - ISA_DMA_THRESHOLD = 0x00ffffff; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - - ppc_md.setup_arch = mcpn765_setup_arch; - ppc_md.show_cpuinfo = mcpn765_show_cpuinfo; - ppc_md.irq_canonicalize = mcpn765_irq_canonicalize; - ppc_md.init_IRQ = mcpn765_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - ppc_md.init = mcpn765_init2; - - ppc_md.restart = mcpn765_restart; - ppc_md.power_off = mcpn765_power_off; - ppc_md.halt = mcpn765_halt; - - ppc_md.find_end_of_memory = mcpn765_find_end_of_memory; - ppc_md.setup_io_mappings = mcpn765_map_io; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.calibrate_decr = todc_calibrate_decr; - - ppc_md.nvram_read_val = todc_m48txx_read_val; - ppc_md.nvram_write_val = todc_m48txx_write_val; - - ppc_md.heartbeat = NULL; - ppc_md.heartbeat_reset = 0; - ppc_md.heartbeat_count = 0; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif -#ifdef CONFIG_KGDB - ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; -#endif - - return; -} diff --git a/arch/ppc/platforms/mcpn765.h b/arch/ppc/platforms/mcpn765.h deleted file mode 100644 index 4d35ecad097..00000000000 --- a/arch/ppc/platforms/mcpn765.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/ppc/platforms/mcpn765.h - * - * Definitions for Motorola MCG MCPN765 cPCI Board. - * - * Author: Mark A. Greer - * mgreer@mvista.com - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * From Processor to PCI: - * PCI Mem Space: 0x80000000 - 0xc0000000 -> 0x80000000 - 0xc0000000 (1 GB) - * PCI I/O Space: 0xfd800000 - 0xfe000000 -> 0x00000000 - 0x00800000 (8 MB) - * Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area - * MPIC in PCI Mem Space: 0xfe800000 - 0xfe830000 (not all used by MPIC) - * - * From PCI to Processor: - * System Memory: 0x00000000 -> 0x00000000 - */ - -#ifndef __PPC_PLATFORMS_MCPN765_H -#define __PPC_PLATFORMS_MCPN765_H -#include - -/* PCI Memory space mapping info */ -#define MCPN765_PCI_MEM_SIZE 0x40000000U -#define MCPN765_PROC_PCI_MEM_START 0x80000000U -#define MCPN765_PROC_PCI_MEM_END (MCPN765_PROC_PCI_MEM_START + \ - MCPN765_PCI_MEM_SIZE - 1) -#define MCPN765_PCI_MEM_START 0x80000000U -#define MCPN765_PCI_MEM_END (MCPN765_PCI_MEM_START + \ - MCPN765_PCI_MEM_SIZE - 1) - -/* PCI I/O space mapping info */ -#define MCPN765_PCI_IO_SIZE 0x00800000U -#define MCPN765_PROC_PCI_IO_START 0xfd800000U -#define MCPN765_PROC_PCI_IO_END (MCPN765_PROC_PCI_IO_START + \ - MCPN765_PCI_IO_SIZE - 1) -#define MCPN765_PCI_IO_START 0x00000000U -#define MCPN765_PCI_IO_END (MCPN765_PCI_IO_START + \ - MCPN765_PCI_IO_SIZE - 1) - -/* System memory mapping info */ -#define MCPN765_PCI_DRAM_OFFSET 0x00000000U -#define MCPN765_PCI_PHY_MEM_OFFSET 0x00000000U - -#define MCPN765_ISA_MEM_BASE 0x00000000U -#define MCPN765_ISA_IO_BASE MCPN765_PROC_PCI_IO_START - -/* Define base addresses for important sets of registers */ -#define MCPN765_HAWK_MPIC_BASE 0xfe800000U -#define MCPN765_HAWK_SMC_BASE 0xfef80000U -#define MCPN765_HAWK_PPC_REG_BASE 0xfeff0000U - -/* Define MCPN765 board register addresses. */ -#define MCPN765_BOARD_STATUS_REG 0xfef88080U -#define MCPN765_BOARD_MODFAIL_REG 0xfef88090U -#define MCPN765_BOARD_MODRST_REG 0xfef880a0U -#define MCPN765_BOARD_TBEN_REG 0xfef880c0U -#define MCPN765_BOARD_GEOGRAPHICAL_REG 0xfef880e8U -#define MCPN765_BOARD_EXT_FEATURE_REG 0xfef880f0U -#define MCPN765_BOARD_LAST_RESET_REG 0xfef880f8U - -/* Defines for UART */ - -/* Define the UART base addresses */ -#define MCPN765_SERIAL_1 0xfef88000 -#define MCPN765_SERIAL_2 0xfef88200 -#define MCPN765_SERIAL_3 0xfef88400 -#define MCPN765_SERIAL_4 0xfef88600 - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 4 -#endif - -/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ -#define BASE_BAUD ( 1843200 / 16 ) -#define UART_CLK 1843200 - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) -#endif - -/* All UART IRQ's are wire-OR'd to IRQ 17 */ -#define STD_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, MCPN765_SERIAL_1, 17, STD_COM_FLAGS, /* ttyS0 */\ - iomem_base: (u8 *)MCPN765_SERIAL_1, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, MCPN765_SERIAL_2, 17, STD_COM_FLAGS, /* ttyS1 */\ - iomem_base: (u8 *)MCPN765_SERIAL_2, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, MCPN765_SERIAL_3, 17, STD_COM_FLAGS, /* ttyS2 */\ - iomem_base: (u8 *)MCPN765_SERIAL_3, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, MCPN765_SERIAL_4, 17, STD_COM_FLAGS, /* ttyS3 */\ - iomem_base: (u8 *)MCPN765_SERIAL_4, \ - iomem_reg_shift: 4, \ - io_type: SERIAL_IO_MEM }, - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DFNS - -/* Define the NVRAM/RTC address strobe & data registers */ -#define MCPN765_PHYS_NVRAM_AS0 0xfef880c8U -#define MCPN765_PHYS_NVRAM_AS1 0xfef880d0U -#define MCPN765_PHYS_NVRAM_DATA 0xfef880d8U - -extern void mcpn765_find_bridges(void); - -#endif /* __PPC_PLATFORMS_MCPN765_H */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 54e5666939b..0c044c51dcc 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -54,8 +54,6 @@ obj-$(CONFIG_LOPEC) += i8259.o pci_auto.o todc_time.o obj-$(CONFIG_HDPU) += pci_auto.o obj-$(CONFIG_LUAN) += indirect_pci.o pci_auto.o todc_time.o obj-$(CONFIG_KATANA) += pci_auto.o -obj-$(CONFIG_MCPN765) += todc_time.o indirect_pci.o pci_auto.o \ - open_pic.o i8259.o hawk_common.o obj-$(CONFIG_MENF1) += todc_time.o i8259.o mpc10x_common.o \ pci_auto.o indirect_pci.o obj-$(CONFIG_MV64360) += mv64360_pic.o diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h index 6d47438be58..485a924e4d0 100644 --- a/include/asm-ppc/serial.h +++ b/include/asm-ppc/serial.h @@ -18,8 +18,6 @@ #include #elif defined(CONFIG_LOPEC) #include -#elif defined(CONFIG_MCPN765) -#include #elif defined(CONFIG_MVME5100) #include #elif defined(CONFIG_PAL4)