From: Michael Hennerich Date: Wed, 8 Jun 2011 14:12:44 +0000 (+0200) Subject: IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC X-Git-Tag: MMI-PSA29.97-13-9~18845^2~439 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=88bc30548aae18a39fd5d35cbb160a1ea347b4a7;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC New driver for AD7792/AD7793 3-Channel, Low Noise, Low Power, 16-/24-Bit Sigma-Delta ADC with On-Chip In-Amp and Reference. The AD7792/AD7793 features a dual use data out ready DOUT/RDY output. In order to avoid contentions on the SPI bus, it's necessary to use spi bus locking. The DOUT/RDY output must also be wired to an interrupt capable GPIO. In INDIO_RING_TRIGGERED mode, this driver may block its SPI bus segment for an extended period of time. Changes since V1: Use bool where applicable. Use data buffer that lives in their own cache line. Restructure ad7793_calibrate_all to use an array. Use msleep. Query REG_ID instead of doing a write/read This is a test. Add support for unipolar mode. Drop range attribute in favor of write scale. Add proper locking. Use new validate_trigger callbacks. Use IIO_IN_DIFF for differential channels. Change attribute naming. Use available_scan_masks. Some other miscellaneous cleanup (none functional changes). Signed-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig index 8c751c46ddd7..b39f2e1c1fe6 100644 --- a/drivers/staging/iio/adc/Kconfig +++ b/drivers/staging/iio/adc/Kconfig @@ -130,6 +130,20 @@ config AD7780 To compile this driver as a module, choose M here: the module will be called ad7780. +config AD7793 + tristate "Analog Devices AD7792 AD7793 ADC driver" + depends on SPI + select IIO_RING_BUFFER + select IIO_SW_RING + select IIO_TRIGGER + help + Say yes here to build support for Analog Devices + AD7792 and AD7793 SPI analog to digital convertors (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called AD7793. + config AD7745 tristate "Analog Devices AD7745, AD7746 AD7747 capacitive sensor driver" depends on I2C diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile index 1d9b3f582eab..f02035139979 100644 --- a/drivers/staging/iio/adc/Makefile +++ b/drivers/staging/iio/adc/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_AD7291) += ad7291.o obj-$(CONFIG_AD7314) += ad7314.o obj-$(CONFIG_AD7745) += ad7745.o obj-$(CONFIG_AD7780) += ad7780.o +obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7816) += ad7816.o obj-$(CONFIG_ADT75) += adt75.o obj-$(CONFIG_ADT7310) += adt7310.o diff --git a/drivers/staging/iio/adc/ad7793.c b/drivers/staging/iio/adc/ad7793.c new file mode 100644 index 000000000000..90f6c039d6c6 --- /dev/null +++ b/drivers/staging/iio/adc/ad7793.c @@ -0,0 +1,987 @@ +/* + * AD7792/AD7793 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../iio.h" +#include "../sysfs.h" +#include "../ring_generic.h" +#include "../ring_sw.h" +#include "../trigger.h" +#include "adc.h" + +#include "ad7793.h" + +/* NOTE: + * The AD7792/AD7793 features a dual use data out ready DOUT/RDY output. + * In order to avoid contentions on the SPI bus, it's therefore necessary + * to use spi bus locking. + * + * The DOUT/RDY output must also be wired to an interrupt capable GPIO. + */ + +struct ad7793_chip_info { + struct iio_chan_spec channel[7]; +}; + +struct ad7793_state { + struct spi_device *spi; + struct iio_trigger *trig; + const struct ad7793_chip_info *chip_info; + struct regulator *reg; + struct ad7793_platform_data *pdata; + wait_queue_head_t wq_data_avail; + bool done; + bool irq_dis; + u16 int_vref_mv; + u16 mode; + u16 conf; + u32 scale_avail[8][2]; + u32 available_scan_masks[7]; + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + u8 data[4] ____cacheline_aligned; +}; + +enum ad7793_supported_device_ids { + ID_AD7792, + ID_AD7793, +}; + +static int __ad7793_write_reg(struct ad7793_state *st, bool locked, + bool cs_change, unsigned char reg, + unsigned size, unsigned val) +{ + u8 *data = st->data; + struct spi_transfer t = { + .tx_buf = data, + .len = size + 1, + .cs_change = cs_change, + }; + struct spi_message m; + + data[0] = AD7793_COMM_WRITE | AD7793_COMM_ADDR(reg); + + switch (size) { + case 3: + data[1] = val >> 16; + data[2] = val >> 8; + data[3] = val; + break; + case 2: + data[1] = val >> 8; + data[2] = val; + break; + case 1: + data[1] = val; + break; + default: + return -EINVAL; + } + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + + if (locked) + return spi_sync_locked(st->spi, &m); + else + return spi_sync(st->spi, &m); +} + +static int ad7793_write_reg(struct ad7793_state *st, + unsigned reg, unsigned size, unsigned val) +{ + return __ad7793_write_reg(st, false, false, reg, size, val); +} + +static int __ad7793_read_reg(struct ad7793_state *st, bool locked, + bool cs_change, unsigned char reg, + int *val, unsigned size) +{ + u8 *data = st->data; + int ret; + struct spi_transfer t[] = { + { + .tx_buf = data, + .len = 1, + }, { + .rx_buf = data, + .len = size, + .cs_change = cs_change, + }, + }; + struct spi_message m; + + data[0] = AD7793_COMM_READ | AD7793_COMM_ADDR(reg); + + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + + if (locked) + ret = spi_sync_locked(st->spi, &m); + else + ret = spi_sync(st->spi, &m); + + if (ret < 0) + return ret; + + switch (size) { + case 3: + *val = data[0] << 16 | data[1] << 8 | data[2]; + break; + case 2: + *val = data[0] << 8 | data[1]; + break; + case 1: + *val = data[0]; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int ad7793_read_reg(struct ad7793_state *st, + unsigned reg, int *val, unsigned size) +{ + return __ad7793_read_reg(st, 0, 0, reg, val, size); +} + +static int ad7793_read(struct ad7793_state *st, unsigned ch, + unsigned len, int *val) +{ + int ret; + st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | AD7793_CONF_CHAN(ch); + st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | + AD7793_MODE_SEL(AD7793_MODE_SINGLE); + + ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf); + + spi_bus_lock(st->spi->master); + st->done = false; + + ret = __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE, + sizeof(st->mode), st->mode); + if (ret < 0) + goto out; + + st->irq_dis = false; + enable_irq(st->spi->irq); + wait_event_interruptible(st->wq_data_avail, st->done); + + ret = __ad7793_read_reg(st, 1, 0, AD7793_REG_DATA, val, len); +out: + spi_bus_unlock(st->spi->master); + + return ret; +} + +static int ad7793_calibrate(struct ad7793_state *st, unsigned mode, unsigned ch) +{ + int ret; + + st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | AD7793_CONF_CHAN(ch); + st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | AD7793_MODE_SEL(mode); + + ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf); + + spi_bus_lock(st->spi->master); + st->done = false; + + ret = __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE, + sizeof(st->mode), st->mode); + if (ret < 0) + goto out; + + st->irq_dis = false; + enable_irq(st->spi->irq); + wait_event_interruptible(st->wq_data_avail, st->done); + + st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | + AD7793_MODE_SEL(AD7793_MODE_IDLE); + + ret = __ad7793_write_reg(st, 1, 0, AD7793_REG_MODE, + sizeof(st->mode), st->mode); +out: + spi_bus_unlock(st->spi->master); + + return ret; +} + +static const u8 ad7793_calib_arr[6][2] = { + {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN1P_AIN1M}, + {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN1P_AIN1M}, + {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN2P_AIN2M}, + {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN2P_AIN2M}, + {AD7793_MODE_CAL_INT_ZERO, AD7793_CH_AIN3P_AIN3M}, + {AD7793_MODE_CAL_INT_FULL, AD7793_CH_AIN3P_AIN3M} +}; + +static int ad7793_calibrate_all(struct ad7793_state *st) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(ad7793_calib_arr); i++) { + ret = ad7793_calibrate(st, ad7793_calib_arr[i][0], + ad7793_calib_arr[i][1]); + if (ret) + goto out; + } + + return 0; +out: + dev_err(&st->spi->dev, "Calibration failed\n"); + return ret; +} + +static int ad7793_setup(struct ad7793_state *st) +{ + int i, ret = -1; + unsigned long long scale_uv; + u32 id; + + /* reset the serial interface */ + ret = spi_write(st->spi, (u8 *)&ret, sizeof(ret)); + if (ret < 0) + goto out; + msleep(1); /* Wait for at least 500us */ + + /* write/read test for device presence */ + ret = ad7793_read_reg(st, AD7793_REG_ID, &id, 1); + if (ret) + goto out; + + id &= AD7793_ID_MASK; + + if (!((id == AD7792_ID) || (id == AD7793_ID))) { + dev_err(&st->spi->dev, "device ID query failed\n"); + goto out; + } + + st->mode = (st->pdata->mode & ~AD7793_MODE_SEL(-1)) | + AD7793_MODE_SEL(AD7793_MODE_IDLE); + st->conf = st->pdata->conf & ~AD7793_CONF_CHAN(-1); + + ret = ad7793_write_reg(st, AD7793_REG_MODE, sizeof(st->mode), st->mode); + if (ret) + goto out; + + ret = ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf); + if (ret) + goto out; + + ret = ad7793_write_reg(st, AD7793_REG_IO, + sizeof(st->pdata->io), st->pdata->io); + if (ret) + goto out; + + ret = ad7793_calibrate_all(st); + if (ret) + goto out; + + /* Populate available ADC input ranges */ + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) { + scale_uv = ((u64)st->int_vref_mv * 100000000) + >> (st->chip_info->channel[0].scan_type.realbits - + (!!(st->conf & AD7793_CONF_UNIPOLAR) ? 0 : 1)); + scale_uv >>= i; + + st->scale_avail[i][1] = do_div(scale_uv, 100000000) * 10; + st->scale_avail[i][0] = scale_uv; + } + + return 0; +out: + dev_err(&st->spi->dev, "setup failed\n"); + return ret; +} + +static int ad7793_scan_from_ring(struct ad7793_state *st, unsigned ch, int *val) +{ + struct iio_ring_buffer *ring = iio_priv_to_dev(st)->ring; + int ret; + s64 dat64[2]; + u32 *dat32 = (u32 *)dat64; + + if (!(ring->scan_mask & (1 << ch))) + return -EBUSY; + + ret = ring->access->read_last(ring, (u8 *) &dat64); + if (ret) + return ret; + + *val = *dat32; + + return 0; +} + +static int ad7793_ring_preenable(struct iio_dev *indio_dev) +{ + struct ad7793_state *st = iio_priv(indio_dev); + struct iio_ring_buffer *ring = indio_dev->ring; + size_t d_size; + unsigned channel; + + if (!ring->scan_count) + return -EINVAL; + + channel = __ffs(ring->scan_mask); + + d_size = ring->scan_count * + indio_dev->channels[0].scan_type.storagebits / 8; + + if (ring->scan_timestamp) { + d_size += sizeof(s64); + + if (d_size % sizeof(s64)) + d_size += sizeof(s64) - (d_size % sizeof(s64)); + } + + if (indio_dev->ring->access->set_bytes_per_datum) + indio_dev->ring->access->set_bytes_per_datum(indio_dev->ring, + d_size); + + st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | + AD7793_MODE_SEL(AD7793_MODE_CONT); + st->conf = (st->conf & ~AD7793_CONF_CHAN(-1)) | + AD7793_CONF_CHAN(indio_dev->channels[channel].address); + + ad7793_write_reg(st, AD7793_REG_CONF, sizeof(st->conf), st->conf); + + spi_bus_lock(st->spi->master); + __ad7793_write_reg(st, 1, 1, AD7793_REG_MODE, + sizeof(st->mode), st->mode); + + st->irq_dis = false; + enable_irq(st->spi->irq); + + return 0; +} + +static int ad7793_ring_postdisable(struct iio_dev *indio_dev) +{ + struct ad7793_state *st = iio_priv(indio_dev); + + st->mode = (st->mode & ~AD7793_MODE_SEL(-1)) | + AD7793_MODE_SEL(AD7793_MODE_IDLE); + + st->done = false; + wait_event_interruptible(st->wq_data_avail, st->done); + + if (!st->irq_dis) + disable_irq_nosync(st->spi->irq); + + __ad7793_write_reg(st, 1, 0, AD7793_REG_MODE, + sizeof(st->mode), st->mode); + + return spi_bus_unlock(st->spi->master); +} + +/** + * ad7793_trigger_handler() bh of trigger launched polling to ring buffer + **/ + +static irqreturn_t ad7793_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->private_data; + struct iio_ring_buffer *ring = indio_dev->ring; + struct ad7793_state *st = iio_priv(indio_dev); + s64 dat64[2]; + s32 *dat32 = (s32 *)dat64; + + if (ring->scan_count) + __ad7793_read_reg(st, 1, 1, AD7793_REG_DATA, + dat32, + indio_dev->channels[0].scan_type.realbits/8); + + /* Guaranteed to be aligned with 8 byte boundary */ + if (ring->scan_timestamp) + dat64[1] = pf->timestamp; + + ring->access->store_to(ring, (u8 *)dat64, pf->timestamp); + + iio_trigger_notify_done(indio_dev->trig); + st->irq_dis = false; + enable_irq(st->spi->irq); + + return IRQ_HANDLED; +} + +static const struct iio_ring_setup_ops ad7793_ring_setup_ops = { + .preenable = &ad7793_ring_preenable, + .postenable = &iio_triggered_ring_postenable, + .predisable = &iio_triggered_ring_predisable, + .postdisable = &ad7793_ring_postdisable, +}; + +static int ad7793_register_ring_funcs_and_init(struct iio_dev *indio_dev) +{ + int ret; + + indio_dev->ring = iio_sw_rb_allocate(indio_dev); + if (!indio_dev->ring) { + ret = -ENOMEM; + goto error_ret; + } + /* Effectively select the ring buffer implementation */ + indio_dev->ring->access = &ring_sw_access_funcs; + indio_dev->pollfunc = iio_alloc_pollfunc(&iio_pollfunc_store_time, + &ad7793_trigger_handler, + IRQF_ONESHOT, + indio_dev, + "ad7793_consumer%d", + indio_dev->id); + if (indio_dev->pollfunc == NULL) { + ret = -ENOMEM; + goto error_deallocate_sw_rb; + } + + /* Ring buffer functions - here trigger setup related */ + indio_dev->ring->setup_ops = &ad7793_ring_setup_ops; + + /* Flag that polled ring buffering is possible */ + indio_dev->modes |= INDIO_RING_TRIGGERED; + return 0; + +error_deallocate_sw_rb: + iio_sw_rb_free(indio_dev->ring); +error_ret: + return ret; +} + +static void ad7793_ring_cleanup(struct iio_dev *indio_dev) +{ + /* ensure that the trigger has been detached */ + if (indio_dev->trig) { + iio_put_trigger(indio_dev->trig); + iio_trigger_dettach_poll_func(indio_dev->trig, + indio_dev->pollfunc); + } + iio_dealloc_pollfunc(indio_dev->pollfunc); + iio_sw_rb_free(indio_dev->ring); +} + +/** + * ad7793_data_rdy_trig_poll() the event handler for the data rdy trig + **/ +static irqreturn_t ad7793_data_rdy_trig_poll(int irq, void *private) +{ + struct ad7793_state *st = iio_priv(private); + + st->done = true; + wake_up_interruptible(&st->wq_data_avail); + disable_irq_nosync(irq); + st->irq_dis = true; + iio_trigger_poll(st->trig, iio_get_time_ns()); + + return IRQ_HANDLED; +} + +static int ad7793_probe_trigger(struct iio_dev *indio_dev) +{ + struct ad7793_state *st = iio_priv(indio_dev); + int ret; + + st->trig = iio_allocate_trigger("%s-dev%d", + spi_get_device_id(st->spi)->name, + indio_dev->id); + if (st->trig == NULL) { + ret = -ENOMEM; + goto error_ret; + } + + ret = request_irq(st->spi->irq, + ad7793_data_rdy_trig_poll, + IRQF_TRIGGER_LOW, + spi_get_device_id(st->spi)->name, + indio_dev); + if (ret) + goto error_free_trig; + + disable_irq_nosync(st->spi->irq); + st->irq_dis = true; + st->trig->dev.parent = &st->spi->dev; + st->trig->owner = THIS_MODULE; + st->trig->private_data = indio_dev; + + ret = iio_trigger_register(st->trig); + + /* select default trigger */ + indio_dev->trig = st->trig; + if (ret) + goto error_free_irq; + + return 0; + +error_free_irq: + free_irq(st->spi->irq, indio_dev); +error_free_trig: + iio_free_trigger(st->trig); +error_ret: + return ret; +} + +static void ad7793_remove_trigger(struct iio_dev *indio_dev) +{ + struct ad7793_state *st = iio_priv(indio_dev); + + iio_trigger_unregister(st->trig); + free_irq(st->spi->irq, indio_dev); + iio_free_trigger(st->trig); +} + +static const u16 sample_freq_avail[16] = {0, 470, 242, 123, 62, 50, 39, 33, 19, + 17, 16, 12, 10, 8, 6, 4}; + +static ssize_t ad7793_read_frequency(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7793_state *st = iio_priv(indio_dev); + + return sprintf(buf, "%d\n", + sample_freq_avail[AD7793_MODE_RATE(st->mode)]); +} + +static ssize_t ad7793_write_frequency(struct device *dev, + struct device_attribute *attr, + const char *buf, + size_t len) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7793_state *st = iio_priv(indio_dev); + long lval; + int i, ret; + + mutex_lock(&indio_dev->mlock); + if (iio_ring_enabled(indio_dev)) { + mutex_unlock(&indio_dev->mlock); + return -EBUSY; + } + mutex_unlock(&indio_dev->mlock); + + ret = strict_strtol(buf, 10, &lval); + if (ret) + return ret; + + ret = -EINVAL; + + for (i = 0; i < ARRAY_SIZE(sample_freq_avail); i++) + if (lval == sample_freq_avail[i]) { + mutex_lock(&indio_dev->mlock); + st->mode &= ~AD7793_MODE_RATE(-1); + st->mode |= AD7793_MODE_RATE(i); + ad7793_write_reg(st, AD7793_REG_MODE, + sizeof(st->mode), st->mode); + mutex_unlock(&indio_dev->mlock); + ret = 0; + } + + return ret ? ret : len; +} + +static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, + ad7793_read_frequency, + ad7793_write_frequency); + +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( + "470 242 123 62 50 39 33 19 17 16 12 10 8 6 4"); + +static ssize_t ad7793_show_scale_available(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct iio_dev *indio_dev = dev_get_drvdata(dev); + struct ad7793_state *st = iio_priv(indio_dev); + int i, len = 0; + + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) + len += sprintf(buf + len, "%d.%09u ", st->scale_avail[i][0], + st->scale_avail[i][1]); + + len += sprintf(buf + len, "\n"); + + return len; +} + +static IIO_DEVICE_ATTR_NAMED(in_m_in_scale_available, in-in_scale_available, + S_IRUGO, ad7793_show_scale_available, NULL, 0); + +static struct attribute *ad7793_attributes[] = { + &iio_dev_attr_sampling_frequency.dev_attr.attr, + &iio_const_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_m_in_scale_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group ad7793_attribute_group = { + .attrs = ad7793_attributes, +}; + +static int ad7793_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ad7793_state *st = iio_priv(indio_dev); + int ret, smpl = 0; + unsigned long long scale_uv; + bool unipolar = !!(st->conf & AD7793_CONF_UNIPOLAR); + + switch (m) { + case 0: + mutex_lock(&indio_dev->mlock); + if (iio_ring_enabled(indio_dev)) + ret = ad7793_scan_from_ring(st, + chan->scan_index, &smpl); + else + ret = ad7793_read(st, chan->address, + chan->scan_type.realbits / 8, &smpl); + mutex_unlock(&indio_dev->mlock); + + if (ret < 0) + return ret; + + *val = (smpl >> chan->scan_type.shift) & + ((1 << (chan->scan_type.realbits)) - 1); + + if (!unipolar) + *val -= (1 << (chan->scan_type.realbits - 1)); + + return IIO_VAL_INT; + + case (1 << IIO_CHAN_INFO_SCALE_SHARED): + *val = st->scale_avail[(st->conf >> 8) & 0x7][0]; + *val2 = st->scale_avail[(st->conf >> 8) & 0x7][1]; + + return IIO_VAL_INT_PLUS_NANO; + + case (1 << IIO_CHAN_INFO_SCALE_SEPARATE): + switch (chan->type) { + case IIO_IN: + /* 1170mV / 2^23 * 6 */ + scale_uv = (1170ULL * 100000000ULL * 6ULL) + >> (chan->scan_type.realbits - + (unipolar ? 0 : 1)); + break; + case IIO_TEMP: + /* Always uses unity gain and internal ref */ + scale_uv = (2500ULL * 100000000ULL) + >> (chan->scan_type.realbits - + (unipolar ? 0 : 1)); + break; + default: + return -EINVAL; + } + + *val2 = do_div(scale_uv, 100000000) * 10; + *val = scale_uv; + + return IIO_VAL_INT_PLUS_NANO; + } + return -EINVAL; +} + +static int ad7793_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad7793_state *st = iio_priv(indio_dev); + int ret, i; + unsigned int tmp; + + mutex_lock(&indio_dev->mlock); + if (iio_ring_enabled(indio_dev)) { + mutex_unlock(&indio_dev->mlock); + return -EBUSY; + } + + switch (mask) { + case (1 << IIO_CHAN_INFO_SCALE_SHARED): + ret = -EINVAL; + for (i = 0; i < ARRAY_SIZE(st->scale_avail); i++) + if (val2 == st->scale_avail[i][1]) { + tmp = st->conf; + st->conf &= ~AD7793_CONF_GAIN(-1); + st->conf |= AD7793_CONF_GAIN(i); + + if (tmp != st->conf) { + ad7793_write_reg(st, AD7793_REG_CONF, + sizeof(st->conf), + st->conf); + ad7793_calibrate_all(st); + } + ret = 0; + } + + default: + ret = -EINVAL; + } + + mutex_unlock(&indio_dev->mlock); + return ret; +} + +static int ad7793_validate_trigger(struct iio_dev *indio_dev, + struct iio_trigger *trig) +{ + if (indio_dev->trig != trig) + return -EINVAL; + + return 0; +} + +static int ad7793_write_raw_get_fmt(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + long mask) +{ + return IIO_VAL_INT_PLUS_NANO; +} + +static const struct iio_info ad7793_info = { + .read_raw = &ad7793_read_raw, + .write_raw = &ad7793_write_raw, + .write_raw_get_fmt = &ad7793_write_raw_get_fmt, + .attrs = &ad7793_attribute_group, + .validate_trigger = ad7793_validate_trigger, + .driver_module = THIS_MODULE, +}; + +static const struct ad7793_chip_info ad7793_chip_info_tbl[] = { + [ID_AD7793] = { + .channel[0] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 0, 0, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN1P_AIN1M, + 0, IIO_ST('s', 24, 32, 0), 0), + .channel[1] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 1, 1, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN2P_AIN2M, + 1, IIO_ST('s', 24, 32, 0), 0), + .channel[2] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 2, 2, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN3P_AIN3M, + 2, IIO_ST('s', 24, 32, 0), 0), + .channel[3] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, "shorted", 0, 0, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN1M_AIN1M, + 3, IIO_ST('s', 24, 32, 0), 0), + .channel[4] = IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, + (1 << IIO_CHAN_INFO_SCALE_SEPARATE), + AD7793_CH_TEMP, + 4, IIO_ST('s', 24, 32, 0), 0), + .channel[5] = IIO_CHAN(IIO_IN, 0, 1, 0, "supply", 4, 0, + (1 << IIO_CHAN_INFO_SCALE_SEPARATE), + AD7793_CH_AVDD_MONITOR, + 5, IIO_ST('s', 24, 32, 0), 0), + .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), + }, + [ID_AD7792] = { + .channel[0] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 0, 0, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN1P_AIN1M, + 0, IIO_ST('s', 16, 32, 0), 0), + .channel[1] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 1, 1, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN2P_AIN2M, + 1, IIO_ST('s', 16, 32, 0), 0), + .channel[2] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, NULL, 2, 2, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN3P_AIN3M, + 2, IIO_ST('s', 16, 32, 0), 0), + .channel[3] = IIO_CHAN(IIO_IN_DIFF, 0, 1, 0, "shorted", 0, 0, + (1 << IIO_CHAN_INFO_SCALE_SHARED), + AD7793_CH_AIN1M_AIN1M, + 3, IIO_ST('s', 16, 32, 0), 0), + .channel[4] = IIO_CHAN(IIO_TEMP, 0, 1, 0, NULL, 0, 0, + (1 << IIO_CHAN_INFO_SCALE_SEPARATE), + AD7793_CH_TEMP, + 4, IIO_ST('s', 16, 32, 0), 0), + .channel[5] = IIO_CHAN(IIO_IN, 0, 1, 0, "supply", 4, 0, + (1 << IIO_CHAN_INFO_SCALE_SEPARATE), + AD7793_CH_AVDD_MONITOR, + 5, IIO_ST('s', 16, 32, 0), 0), + .channel[6] = IIO_CHAN_SOFT_TIMESTAMP(6), + }, +}; + +static int __devinit ad7793_probe(struct spi_device *spi) +{ + struct ad7793_platform_data *pdata = spi->dev.platform_data; + struct ad7793_state *st; + struct iio_dev *indio_dev; + int ret, i, voltage_uv = 0, regdone = 0; + + if (!pdata) { + dev_err(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + if (!spi->irq) { + dev_err(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + indio_dev = iio_allocate_device(sizeof(*st)); + if (indio_dev == NULL) + return -ENOMEM; + + st = iio_priv(indio_dev); + + st->reg = regulator_get(&spi->dev, "vcc"); + if (!IS_ERR(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + goto error_put_reg; + + voltage_uv = regulator_get_voltage(st->reg); + } + + st->chip_info = + &ad7793_chip_info_tbl[spi_get_device_id(spi)->driver_data]; + + st->pdata = pdata; + + if (pdata && pdata->vref_mv) + st->int_vref_mv = pdata->vref_mv; + else if (voltage_uv) + st->int_vref_mv = voltage_uv / 1000; + else + st->int_vref_mv = 2500; /* Build-in ref */ + + spi_set_drvdata(spi, indio_dev); + st->spi = spi; + + indio_dev->dev.parent = &spi->dev; + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = st->chip_info->channel; + indio_dev->available_scan_masks = st->available_scan_masks; + indio_dev->num_channels = 7; + indio_dev->info = &ad7793_info; + + for (i = 0; i < indio_dev->num_channels; i++) + st->available_scan_masks[i] = (1 << i) | (1 << + indio_dev->channels[indio_dev->num_channels - 1]. + scan_index); + + init_waitqueue_head(&st->wq_data_avail); + + ret = ad7793_register_ring_funcs_and_init(indio_dev); + if (ret) + goto error_disable_reg; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_unreg_ring; + regdone = 1; + + ret = ad7793_probe_trigger(indio_dev); + if (ret) + goto error_unreg_ring; + + ret = iio_ring_buffer_register_ex(indio_dev->ring, 0, + indio_dev->channels, + indio_dev->num_channels); + if (ret) + goto error_remove_trigger; + + ret = ad7793_setup(st); + if (ret) + goto error_uninitialize_ring; + + return 0; + +error_uninitialize_ring: + iio_ring_buffer_unregister(indio_dev->ring); +error_remove_trigger: + ad7793_remove_trigger(indio_dev); +error_unreg_ring: + ad7793_ring_cleanup(indio_dev); +error_disable_reg: + if (!IS_ERR(st->reg)) + regulator_disable(st->reg); +error_put_reg: + if (!IS_ERR(st->reg)) + regulator_put(st->reg); + + if (regdone) + iio_device_unregister(indio_dev); + else + iio_free_device(indio_dev); + + return ret; +} + +static int ad7793_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ad7793_state *st = iio_priv(indio_dev); + + iio_ring_buffer_unregister(indio_dev->ring); + ad7793_remove_trigger(indio_dev); + ad7793_ring_cleanup(indio_dev); + + if (!IS_ERR(st->reg)) { + regulator_disable(st->reg); + regulator_put(st->reg); + } + + iio_device_unregister(indio_dev); + + return 0; +} + +static const struct spi_device_id ad7793_id[] = { + {"ad7792", ID_AD7792}, + {"ad7793", ID_AD7793}, + {} +}; + +static struct spi_driver ad7793_driver = { + .driver = { + .name = "ad7793", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7793_probe, + .remove = __devexit_p(ad7793_remove), + .id_table = ad7793_id, +}; + +static int __init ad7793_init(void) +{ + return spi_register_driver(&ad7793_driver); +} +module_init(ad7793_init); + +static void __exit ad7793_exit(void) +{ + spi_unregister_driver(&ad7793_driver); +} +module_exit(ad7793_exit); + +MODULE_AUTHOR("Michael Hennerich "); +MODULE_DESCRIPTION("Analog Devices AD7792/3 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/iio/adc/ad7793.h b/drivers/staging/iio/adc/ad7793.h new file mode 100644 index 000000000000..64f7d41dc453 --- /dev/null +++ b/drivers/staging/iio/adc/ad7793.h @@ -0,0 +1,107 @@ +/* + * AD7792/AD7793 SPI ADC driver + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef IIO_ADC_AD7793_H_ +#define IIO_ADC_AD7793_H_ + +/* + * TODO: struct ad7793_platform_data needs to go into include/linux/iio + */ + +/* Registers */ +#define AD7793_REG_COMM 0 /* Communications Register (WO, 8-bit) */ +#define AD7793_REG_STAT 0 /* Status Register (RO, 8-bit) */ +#define AD7793_REG_MODE 1 /* Mode Register (RW, 16-bit */ +#define AD7793_REG_CONF 2 /* Configuration Register (RW, 16-bit) */ +#define AD7793_REG_DATA 3 /* Data Register (RO, 16-/24-bit) */ +#define AD7793_REG_ID 4 /* ID Register (RO, 8-bit) */ +#define AD7793_REG_IO 5 /* IO Register (RO, 8-bit) */ +#define AD7793_REG_OFFSET 6 /* Offset Register (RW, 16-bit + * (AD7792)/24-bit (AD7793)) */ +#define AD7793_REG_FULLSALE 7 /* Full-Scale Register + * (RW, 16-bit (AD7792)/24-bit (AD7793)) */ + +/* Communications Register Bit Designations (AD7793_REG_COMM) */ +#define AD7793_COMM_WEN (1 << 7) /* Write Enable */ +#define AD7793_COMM_WRITE (0 << 6) /* Write Operation */ +#define AD7793_COMM_READ (1 << 6) /* Read Operation */ +#define AD7793_COMM_ADDR(x) (((x) & 0x7) << 3) /* Register Address */ +#define AD7793_COMM_CREAD (1 << 2) /* Continuous Read of Data Register */ + +/* Status Register Bit Designations (AD7793_REG_STAT) */ +#define AD7793_STAT_RDY (1 << 7) /* Ready */ +#define AD7793_STAT_ERR (1 << 6) /* Error (Overrange, Underrange) */ +#define AD7793_STAT_CH3 (1 << 2) /* Channel 3 */ +#define AD7793_STAT_CH2 (1 << 1) /* Channel 2 */ +#define AD7793_STAT_CH1 (1 << 0) /* Channel 1 */ + +/* Mode Register Bit Designations (AD7793_REG_MODE) */ +#define AD7793_MODE_SEL(x) (((x) & 0x7) << 13) /* Operation Mode Select */ +#define AD7793_MODE_CLKSRC(x) (((x) & 0x3) << 6) /* ADC Clock Source Select */ +#define AD7793_MODE_RATE(x) ((x) & 0xF) /* Filter Update Rate Select */ + +#define AD7793_MODE_CONT 0 /* Continuous Conversion Mode */ +#define AD7793_MODE_SINGLE 1 /* Single Conversion Mode */ +#define AD7793_MODE_IDLE 2 /* Idle Mode */ +#define AD7793_MODE_PWRDN 3 /* Power-Down Mode */ +#define AD7793_MODE_CAL_INT_ZERO 4 /* Internal Zero-Scale Calibration */ +#define AD7793_MODE_CAL_INT_FULL 5 /* Internal Full-Scale Calibration */ +#define AD7793_MODE_CAL_SYS_ZERO 6 /* System Zero-Scale Calibration */ +#define AD7793_MODE_CAL_SYS_FULL 7 /* System Full-Scale Calibration */ + +#define AD7793_CLK_INT 0 /* Internal 64 kHz Clock not + * available at the CLK pin */ +#define AD7793_CLK_INT_CO 1 /* Internal 64 kHz Clock available + * at the CLK pin */ +#define AD7793_CLK_EXT 2 /* External 64 kHz Clock */ +#define AD7793_CLK_EXT_DIV2 3 /* External Clock divided by 2 */ + +/* Configuration Register Bit Designations (AD7793_REG_CONF) */ +#define AD7793_CONF_VBIAS(x) (((x) & 0x3) << 14) /* Bias Voltage + * Generator Enable */ +#define AD7793_CONF_BO_EN (1 << 13) /* Burnout Current Enable */ +#define AD7793_CONF_UNIPOLAR (1 << 12) /* Unipolar/Bipolar Enable */ +#define AD7793_CONF_BOOST (1 << 11) /* Boost Enable */ +#define AD7793_CONF_GAIN(x) (((x) & 0x7) << 8) /* Gain Select */ +#define AD7793_CONF_REFSEL (1 << 7) /* INT/EXT Reference Select */ +#define AD7793_CONF_BUF (1 << 4) /* Buffered Mode Enable */ +#define AD7793_CONF_CHAN(x) ((x) & 0x7) /* Channel select */ + +#define AD7793_CH_AIN1P_AIN1M 0 /* AIN1(+) - AIN1(-) */ +#define AD7793_CH_AIN2P_AIN2M 1 /* AIN2(+) - AIN2(-) */ +#define AD7793_CH_AIN3P_AIN3M 2 /* AIN3(+) - AIN3(-) */ +#define AD7793_CH_AIN1M_AIN1M 3 /* AIN1(-) - AIN1(-) */ +#define AD7793_CH_TEMP 6 /* Temp Sensor */ +#define AD7793_CH_AVDD_MONITOR 7 /* AVDD Monitor */ + +/* ID Register Bit Designations (AD7793_REG_ID) */ +#define AD7792_ID 0xA +#define AD7793_ID 0xB +#define AD7793_ID_MASK 0xF + +/* IO (Excitation Current Sources) Register Bit Designations (AD7793_REG_IO) */ +#define AD7793_IO_IEXC1_IOUT1_IEXC2_IOUT2 0 /* IEXC1 connect to IOUT1, + * IEXC2 connect to IOUT2 */ +#define AD7793_IO_IEXC1_IOUT2_IEXC2_IOUT1 1 /* IEXC1 connect to IOUT2, + * IEXC2 connect to IOUT1 */ +#define AD7793_IO_IEXC1_IEXC2_IOUT1 2 /* Both current sources + * IEXC1,2 connect to IOUT1 */ +#define AD7793_IO_IEXC1_IEXC2_IOUT2 3 /* Both current sources + * IEXC1,2 connect to IOUT2 */ + +#define AD7793_IO_IXCEN_10uA (1 << 0) /* Excitation Current 10uA */ +#define AD7793_IO_IXCEN_210uA (2 << 0) /* Excitation Current 210uA */ +#define AD7793_IO_IXCEN_1mA (3 << 0) /* Excitation Current 1mA */ + +struct ad7793_platform_data { + u16 vref_mv; + u16 mode; + u16 conf; + u8 io; +}; + +#endif /* IIO_ADC_AD7793_H_ */