From: Jarod Wilson Date: Wed, 29 Jun 2016 03:41:31 +0000 (-0700) Subject: e1000e: keep VLAN interfaces functional after rxvlan off X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=889ad4566604610804df984e1a3dd5e2c66256e5;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git e1000e: keep VLAN interfaces functional after rxvlan off I've got a bug report about an e1000e interface, where a VLAN interface is set up on top of it: $ ip link add link ens1f0 name ens1f0.99 type vlan id 99 $ ip link set ens1f0 up $ ip link set ens1f0.99 up $ ip addr add 192.168.99.92 dev ens1f0.99 At this point, I can ping another host on vlan 99, ip 192.168.99.91. However, if I do the following: $ ethtool -K ens1f0 rxvlan off Then no traffic passes on ens1f0.99. It comes back if I toggle rxvlan on again. I'm not sure if this is actually intended behavior, or if there's a lack of software VLAN stripping fallback, or what, but things continue to work if I simply don't call e1000e_vlan_strip_disable() if there are active VLANs (plagiarizing a function from the e1000 driver here) on the interface. Also slipped a related-ish fix to the kerneldoc text for e1000e_vlan_strip_disable here... Signed-off-by: Jarod Wilson Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 75e60897b7e7..73f745205a1c 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -154,6 +154,16 @@ void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val) writel(val, hw->hw_addr + reg); } +static bool e1000e_vlan_used(struct e1000_adapter *adapter) +{ + u16 vid; + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) + return true; + + return false; +} + /** * e1000_regdump - register printout routine * @hw: pointer to the HW structure @@ -2789,7 +2799,7 @@ static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter) } /** - * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping + * e1000e_vlan_strip_disable - helper to disable HW VLAN stripping * @adapter: board private structure to initialize **/ static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter) @@ -3443,7 +3453,8 @@ static void e1000e_set_rx_mode(struct net_device *netdev) ew32(RCTL, rctl); - if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) + if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX || + e1000e_vlan_used(adapter)) e1000e_vlan_strip_enable(adapter); else e1000e_vlan_strip_disable(adapter);