From: Laurent Pinchart Date: Fri, 19 Apr 2013 11:29:48 +0000 (+0200) Subject: ARM: shmobile: mackerel: Register IRQ pinctrl mapping for SDHI0 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=886c5353a821b28939f095ea2394e6d471f11be0;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: shmobile: mackerel: Register IRQ pinctrl mapping for SDHI0 Replace the GPIO-based SDHI0 IRQ pinmux configuration by a pinctrl mapping. Signed-off-by: Laurent Pinchart Signed-off-by: Simon Horman --- diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index bd3666bc36e2..4be236d1dfb4 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1359,6 +1359,8 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = { "sdhi0_ctrl", "sdhi0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", "sdhi0_wp", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh7372", + "intc_irq26_1", "intc"), /* SDHI1 */ #if !IS_ENABLED(CONFIG_MMC_SH_MMCIF) PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh7372", @@ -1469,9 +1471,6 @@ static void __init mackerel_init(void) /* Accelerometer */ irq_set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH); - /* SDHI0 PORT172 card-detect IRQ26 */ - gpio_request(GPIO_FN_IRQ26_172, NULL); - /* Reset HDMI, must be held at least one EXTALR (32768Hz) period */ srcr4 = __raw_readl(SRCR4); __raw_writel(srcr4 | (1 << 13), SRCR4);